Database Users

Active sync service not offered by PC

I'm trying to sync my phone over Bluetooth (HTC Universal / Activesync 4.1 running on WinXP SP2)
I can send and receive files fine, and i've followed the step-by-step guide to creating a bluetooth connection in Activesync, but for some reason, when my phone finds my PC, there arent any services that it can use, so it wont sync.
I cant find anything mentioned about this in any of the help files, so i was wondering if anyone knew what im doing wrong?
Thanks!

http://www.geekzone.co.nz/content.asp?ContentId=3163
http://www.geekzone.co.nz/content.asp?contentid=2417

OK well ive already followed the exact setup as in the first guide, but in the 2nd guide, they go into the Bluetooth setup (http://www.geekzone.co.nz/images/articles/ASBT3970/pc04.jpg)
but i dont get that option at all, im assuming its because i removed the Belkin drivers (seeing as their screenshot mentions TDK)... but they told me to remove that in the 1st setup Gah!

first when xp2 came out i used the ms bluetooth driver and it worked
ok later belkin and many others who use viddcomm software made new drivers for xp sp2 which works just fine too

Qtek S200 Active sync not working Drivers needed

Hello all,
I have bought qtek S200 recently and i have spent a lot of man hours trying to get this thing to sync with my desktop computer. it works fine with my laptop however doesn't want to sync with my desktop.
I get an new hardware wizard when i plug my pda into the USB requests for me to point to the drivers because windows was unable to find drivers.. I have gone through troubleshooting steps where disabling firewall / ant virus. Uninstalling active sync reinstalling / downgrading active sync and upgrading no luck. doesn’t matter if i try 3.8 or 4.2 it doesn't want to recognize my device and asks for the drivers.
i have windows xp with service pack 2 installed. so at this point i am wondering if someone has the driver files for it ? or what should be next step, any help would be appreciated.

Don't even try with activesync 3.8. It doesn't support WM5. Use 4.1 or 4.2...
Can't help beyond that...

I tought I had tried everything as well, when I found this utility over at Modaco (apparently included in the latest Dopod ROM).
Install and switch from RNDIS to Serial using the program and voila - worked like a charm for me!
Hope it helps!

After fighting with this device and my system for about 2 weeks. i noticed that my system had become so unstable that it wont' accept any new hardware. I tried installing a new 3COM network card and mostly 3com NIC's dont' require drivers however my system poped a window stating can't find drivers and put the device in system not working properly status.
so then i decided to format my computer and after the format, installed service pack 2 for xp and tried ACTIVE SYNC. without a problem it worked fine.

Problem with ActiveSync! Please, HELP!

Hi everybody!
Since a few days I have my new Qtek S200 with Windows Mobile 5.0. The problem is that I can't connect it to my desk computer. I downloaded the ActiveSync 4.1 from the "Getting started" CD and tryed to connect my Qtek via USB cabel. The computer sees my device and says that is working correctly. The programs from CD are downloaded correctly (I preinstalled them a couple of times). When I start the connection it says that every port is working correctly (included USB) but the device was not detected!. I use Windows XP with 2 Pack, firewall Kerio Personal 4 and antivirus Avast 4.7 Home Edition.
I really don't know what should I do to connect correctly my device.
Please, help me giving some ideas, maybe you had the same problems and you could share with me your experiences!
My best,
Marcin

I found the problem!! It was a firewall that was blocking the connection. After disabling the firewall everythink is functioning without problems!

lucky you.
I disabled everything possible and still my Prophet does not want to connect through the USB cable after the first time.
What drives me crazy is that the first time it works ok and fast.

Cant connect to AS 4.5

First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.

1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.

same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!

Do you get any error messages on AS? Can you browse the internet from device?

usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works

Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-

cannot sync my qtek9000 anymore

Hello there from Italy.
I posted this because of a problem that is driving me mad since some weeks. first my data.
pc:
win xp sp3
outlook 2003
active sync 4.5
qtek 9000:
win 5
sbsh phoneweaver
sbsh iLauncher
memmaid
sprite backup
The problem is that when I connect my qtek to the pc via the usb cable the pc tells me that it had a problem installing the new hardware. After that no active sync is coming out and thus no syncronization.
It is definitely a pc bug since I can syncronize my qtek in other pc.
Following some italian forum I uninstalled all usb controllers and things but had no success.
I'm desperate. Can you please help me?
My bests
Michael

Guys...................no one really can help me out?
C'mon, this is a giant leap for me but a small step for you...............
Michael

Did you uninstall/re-install ActiveSync? If not, try that.
If you have and that didn't fix it, try going to Start > Settings > Connections > USB to PC and untick "Enable advanced network functionality" then try again.

Thanks Nanoruler for your quick response.
Yes, I did try to reinstall AS 4.5 plus I have no icon for USB to PC connection in my qtek 9000.................what's going on here?
Thanks............
Michael

Try running the attached CAB

Nanoruler,
thanks a 1000 for your help. Not being a nasa computer expert, can you tell me what is the cab attached and how to use it?
Thanks in advance
Michael

Nanoruler, are you there, my friend?
I'm relying on your help for this..............
hope to read from you soon.............
Michael

Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!

Hi Batvanio,
can you please tell me how to install it? I'm a bit beginner here............
bests
Michael

batvanio said:
Thanks a lot for this file usbswitch!!! after installing it HTC HD syncs again!
Click to expand...
Click to collapse
It's working with vista?

please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael

michaelmellner said:
please..........i'm on my knees: can someone tell me how to install it? Sorry for being such a beginner but it shouldn't be such a big deal to tell me how to use this thing.
all the bests
Michael
Click to expand...
Click to collapse
Depend if you´re using Vista or XP
Vista: Windows Mobile device Center
XP: Active Sync 4.5
Just google it, download and install
Good luck,

ok. I gave it a try, but nothing new happened. I want to think it is not the usb switch fault but my lack of knowledge. Since I don't know how to install it, I clicked on the xml file. An IE page opened wanrning me of the threat running activex commands. I accepted it and clocked on run. After that I tried to hook my qtek but, as mentioned, nothing happened.
Did I install it the proper way?
please let me know about it.
all the bests
Michael

Michael, just copy usbswitch.cab to an SD card, and then find it on your Uni using File Explorer and click on it. It will then install.

Hi Jon and a milion thanks: finally someone who guided me through. Gosh, after all it didn't take that much, uh? All it took was your words.
really really thank you
Michael

iiiiiiiiiiiiiiiiihaaaaaaaaaaaaaah!!!!!
it works: after a zilion months and tests I finally got my universal to hook with my laptop again.
Thanks a lot for that USB switch: it sure helped me out on this while hundreds in various forums across the world couldn't..............
Incredible........
Michael

xda-developers - the best place for gathered information!

definitely!
michael

cant connect
Hey guys... i just bought a qtek 9000 and i can't sync it with my laptop. Running
WinXP SP3
ActiveSync 4.5
and
WM 6.1 RAN ROM
I tried the usbswich cab and nothing happened. Can you help me?
The PC installed the device but activesync is not even trying to sync the device.

Congrats on your Universal!!
Try to uncheck the advanced functionality under usb to pc
Also have a deep read here:
http://forum.xda-developers.com/showthread.php?t=549207
Hope it helps,