Database Users

m600 dead

i have a m600 its about 3 month old, just done a factory hard reset after having many problems getting it to stay on, after about a hour of ****ing about with the mains charger it decided to turn on, however just kept on rebooting, back to the boot screan, not the 3 clolred boot menu, but the orange start screen with numbers like 2.1.001? however now it has been stuck on the blue windows mobile screen for 5 mins and not changed, it is pluged in to mains but i have no lights ilununated not green or orange or red? i know this is a long shot but any ideas befor i smash it through my local orange shop window?

I think the solution is use mtty tool doing format the DOC is OK

MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef

feffo said:
WHaat does it mean ?
MY phone is stucked too at the screen where
ip 2.10.0001
Spl 2.10.0001
Gsm 02.07 .20
Os 2.10.1.30
are after a tentaive of changing ROM.
Merci
Ciao
Stef
Click to expand...
Click to collapse
Ola,
just for info.
I made a big mistake detaching the cable during tentatve of CID unlock
My SPV M600was dead ....
Thanks to deep investigation mainly on his forum I found the solution:
Hard reset the M600: Photo button + COmm Manaer buttor + stylo in the ole near usb connector (soft reset),
releasing first the comm button, leving photo button pressed
this leave you in a multicolor screen with usb written in the bottom left (if connected to PC)
then I run the ROM updater that I found here:
http://forum.xda-developers.com/showthread.php?t=297489&page=3
In 10 minutes it as reborn, and I was happy again
Ciao ciao

MANH Fone said:
I think the solution is use mtty tool doing format the DOC is OK
Click to expand...
Click to collapse
How 'bout all task? Can you show me ?

Hi i have the same problem i updated my M600 when i went to charge it no lights came on and the fone failed to come on i have tryed to do a hard reset and a sort reset but the fone just looks dead any advice plzzzzzz?

yeah, try turning it off, or remove the battery. Then hold the camera button. Then insert USB. Phone should show bootloader (3colour screen). You can now flash official RUU.

have some on try to flash a original rom with IPL/SPL/Radio Rom/OS?

Dead Prophet; Please help!

I dropped the my prophet on the floor. Now its stuck on the boot screen. It doesnt go any further. Looks like a hardware issue. But is there any suggestions which I could try to fix my phone. Any help would be appreciated.
Thanks

Maybe your cyrstal oscillatior got trouble.

Which "boot screen"? If you can enter bootloader (hold the comm manager button and soft reset) you should be fine. If not it's probably a hardware issue.

l3v5y said:
Which "boot screen"? If you can enter bootloader (hold the comm manager button and soft reset) you should be fine. If not it's probably a hardware issue.
Click to expand...
Click to collapse
Hi, I can enter the bootloader. But when I softreset it does not go any fyrther than the boot screen, which says Qtek on it.

jugulator said:
Hi, I can enter the bootloader. But when I softreset it does not go any fyrther than the boot screen, which says Qtek on it.
Click to expand...
Click to collapse
Put it into bootloader, and then read/use this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery

l3v5y said:
Put it into bootloader, and then read/use this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Click to expand...
Click to collapse
Hi, Thanks. I tried your method and successfully completed the falshing. But the phone still gets stuck at the boot screen which displays "Qtek" on it and doesnt go to the today screen. I cannot turn the device off either. I have to take the battery out to turn it off.

jugulator said:
Hi, Thanks. I tried your method and successfully completed the falshing. But the phone still gets stuck at the boot screen which displays "Qtek" on it and doesnt go to the today screen. I cannot turn the device off either. I have to take the battery out to turn it off.
Click to expand...
Click to collapse
Can you put the device into bootloader, and tell me what the IPL/SPL are? Also, what brand is the device?

l3v5y said:
Can you put the device into bootloader, and tell me what the IPL/SPL are? Also, what brand is the device?
Click to expand...
Click to collapse
Hi thanks. It reads
ipl 2.10.0001
spl 2.20.001
gsm 02.47.21
os 2.20.7.34
The device Orange M600 (UK) G4.
Thanks

jugulator said:
Hi thanks. It reads
ipl 2.10.0001
spl 2.20.001
gsm 02.47.21
os 2.20.7.34
The device Orange M600 (UK) G4.
Thanks
Click to expand...
Click to collapse
Hehe! Same as mine!
Try to download and flash the Orange UK ROM (the wiki ) and see if that helps.

l3v5y said:
Hehe! Same as mine!
Try to download and flash the Orange UK ROM (the wiki ) and see if that helps.
Click to expand...
Click to collapse
I have downloaded the rom but looks like my prophet is completely dead now. It doesnt power up at all now! So, I could not flash the rom

How to kick out X1i out of bootloader mode?

Hello.
One xperia entered tricolor screen (volume down + powering on) but now it cannot leave that screen, even if the battery is taken out for a minute.
Is there a way to kick the xperia out of bootloader mode?
Thanks.

when you take the battery cover out you should see a hole, insert the stylus in it and "push".
enjoy.

Thanks a lot.
I hope you don't mind, but since these devices are not the cheapest phones out there and you have 3 posts and just joined... I'll wait for some one else to confirm.
Thanks a lot anyway!
Any one can confirm?

I do mind and I hope it breaks on you and becomes nonusable ever again

celinelust said:
I do mind and I hope it breaks on you and becomes nonusable ever again
Click to expand...
Click to collapse
Not nice...

That action is to soft reset only not to enter bootloader (normally u need more then a few key combi to enter just like manual hard reset)

Hello.
Any one that can help?
I tried the 'reset' button but of course that didn't help.
I tried hard reset and it showed it was hard reseting, but after than the same tricolor screen appears.
It says in this order:
RUUNBH (aligned right)
KOVS110
SPL-0.72.0000
MicroP1-787
MicroP2-707 (these last 4, aligned left)
Upgrade ROM Code Error (centered)
Please try again (centered)
Serial (centered)

I tried also RUU with hardspl, and RUU with ruu_signed.nbh (supposedly UK official rom).
In both cases it goes to withe screen with the progress bar at 0% but stays there until you take off batery, then it returns to previosly mentioned tri-color screen.
HELP please!

Help?

Hello,
I've tried to update my HTC dual touch from Vodafone NL, but something went wrong. Now my phone is only vieuwing de 3color screen.. Hard reset doesn't help. Is there some how has the original vodafone rom software or other solution?
Thanks..

thabomb1980 said:
Hello,
I've tried to update my HTC dual touch from Vodafone NL, but something went wrong. Now my phone is only vieuwing de 3color screen.. Hard reset doesn't help. Is there some how has the original vodafone rom software or other solution?
Thanks..
Click to expand...
Click to collapse
Hiya thabomb,
I am new to this, but am pretty sure that you can reset it thus:
Assuming that you have removed the battery and put it back in.
Hold down the red and green buttons (on the front), at the same time use the stylus to press the reset button (remove back cover and find it just above the mini-usb port).
If this does not work, I will have to let the experts take over.
Good luck
hamster64

Assuming that you have removed the battery and put it back in.
Hold down the red and green buttons (on the front), at the same time use the stylus to press the reset button (remove back cover and find it just above the mini-usb port).
Click to expand...
Click to collapse
It's calls Hard Reset
Hard reset doesn't help
Click to expand...
Click to collapse
Do you still have that rom? Try to flash it again. If it doesn't help: flash a HardSPL first, and try again
http://forum.xda-developers.com/showthread.php?t=355730

Tim4 said:
It's calls Hard Reset
Do you still have that rom? Try to flash it again. If it doesn't help: flash a HardSPL first, and try again
http://forum.xda-developers.com/showthread.php?t=355730
Click to expand...
Click to collapse
That'll learn me to stay up too late! And read posts properly.

P3400 gene100 is not starting!

Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh

aneeshnr said:
Hi,
My 3400 is not starting. When i start the phone it hangs up in the "windows mobile direct push technology" screen. I tried without SD card and SIM but no luck. I have all my contacts inside and I need them. How can I fix the problem of my phone. Please help.
ONBL 1.10.0000
SPL 1.10.0000
GSM 2.79.90
OS 1.10.0.0
-aneesh
Click to expand...
Click to collapse
i don't think u can save ur contacts now
just hard reset ur device but all data will be lost.

How to do the hard reset? please tell me.
no way to save data?

Hi,
I searched google and got the method to hard reset.
-------------
To perform a hard reset (Full Reset) press and hold the left SOFT KEY and the right SOFT KEY, and at the same
time, use the stylus to press the RESET button at the middle left side of your device.
Release the stylus, but continue pressing the two SOFT KEYs until you see the following message on the screen:
This operation will delete all your personal data, and reset
all settings to manufacturer default. Press Send to restore
manufacturer default, or press other keys to cancel.
Release now the two SOFT KEYs, and then press the TALK (Send) button
---------------------
But when I press the reset button phone restarted but nothing siplayed as mentioned above. Again it went to windows screen and hung there! Cant even do hard reset? What can I do now? Please hlep.

It is ok now. thanks

aneeshnr said:
It is ok now. thanks
Click to expand...
Click to collapse
its nice to hear that ur device is working .
enjoy!!

I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.

sanmukhsingh said:
I was update my htc p3400i ROM, after completion. Phone turn off but not restart, if I try camera button and reset button only green and red right blink not any indication shown on screen,…please help me.
I shall very thankful, if you solve my problem
Sanmukh singh
MSL, Mumbai.
Click to expand...
Click to collapse
which rom u have updated??????????

hi deepav84,
i was updating this rom "RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79.90_Ship" after 100% complete it turns off , but not start only Green and red light flash during press reset button...
i was try all methods,#remove batery 20 sec and then start with camer button & both camera and voice button, nothing shown in USB in PC. but result is same...
please help how i can recover my device.....