I dropped the my prophet on the floor. Now its stuck on the boot screen. It doesnt go any further. Looks like a hardware issue. But is there any suggestions which I could try to fix my phone. Any help would be appreciated.
Thanks
Maybe your cyrstal oscillatior got trouble.
Which "boot screen"? If you can enter bootloader (hold the comm manager button and soft reset) you should be fine. If not it's probably a hardware issue.
l3v5y said:
Which "boot screen"? If you can enter bootloader (hold the comm manager button and soft reset) you should be fine. If not it's probably a hardware issue.
Click to expand...
Click to collapse
Hi, I can enter the bootloader. But when I softreset it does not go any fyrther than the boot screen, which says Qtek on it.
jugulator said:
Hi, I can enter the bootloader. But when I softreset it does not go any fyrther than the boot screen, which says Qtek on it.
Click to expand...
Click to collapse
Put it into bootloader, and then read/use this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
l3v5y said:
Put it into bootloader, and then read/use this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
Click to expand...
Click to collapse
Hi, Thanks. I tried your method and successfully completed the falshing. But the phone still gets stuck at the boot screen which displays "Qtek" on it and doesnt go to the today screen. I cannot turn the device off either. I have to take the battery out to turn it off.
jugulator said:
Hi, Thanks. I tried your method and successfully completed the falshing. But the phone still gets stuck at the boot screen which displays "Qtek" on it and doesnt go to the today screen. I cannot turn the device off either. I have to take the battery out to turn it off.
Click to expand...
Click to collapse
Can you put the device into bootloader, and tell me what the IPL/SPL are? Also, what brand is the device?
l3v5y said:
Can you put the device into bootloader, and tell me what the IPL/SPL are? Also, what brand is the device?
Click to expand...
Click to collapse
Hi thanks. It reads
ipl 2.10.0001
spl 2.20.001
gsm 02.47.21
os 2.20.7.34
The device Orange M600 (UK) G4.
Thanks
jugulator said:
Hi thanks. It reads
ipl 2.10.0001
spl 2.20.001
gsm 02.47.21
os 2.20.7.34
The device Orange M600 (UK) G4.
Thanks
Click to expand...
Click to collapse
Hehe! Same as mine!
Try to download and flash the Orange UK ROM (the wiki ) and see if that helps.
l3v5y said:
Hehe! Same as mine!
Try to download and flash the Orange UK ROM (the wiki ) and see if that helps.
Click to expand...
Click to collapse
I have downloaded the rom but looks like my prophet is completely dead now. It doesnt power up at all now! So, I could not flash the rom
Related
ok i think iv killed my m600
i flashed it with the older imate rom the 1.0.9 version
it installed 100% and rebooted and from ther it was stuck on the imate screen for like 10 minutes and i see the following text in red on the top left corner
---------------------
IPL 2.10.0001
SPL 2.15.0001
GSM 01.14.20
OS 1.0.9.25
-------------------------
i tried removing the battery and restarting the fone. still the same thing. can someone please please please help me with this?
what do i do?
im sure orange wont help me out since i flashed it with a non-orange rom.
never mind fixed itby goin into the bootloader
funky_Saggi said:
never mind fixed itby goin into the bootloader
Click to expand...
Click to collapse
hi there i seem to have the same problem as you with the boot screen. top left corner say's
IPL 2.10.0001
SPL 2.10.0001
GSM 02.07.20
OS 1.0.13.21
can you please tell me how you fixed yours please it would be a great help
What you could do is flash it with an newer rom
Hold camera button AND reset (be asure that it hold it while resetting)
Then... you are in you bootloader... connect the PDA with your PC..it will recognized it!
Then run the romupdate ;-)
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
crossy4life said:
Hi thanks for trying to help me i got my phone in to the 3 colour screen but my computer does not pic it up at all. is there another way to save my M600
Click to expand...
Click to collapse
Aren't you getting "USB" written in the bottom left corner of the 3 colour screen when you connect it to USB?
Yes i get the USB come up at the bottom of the screen my computer does not do anything. can you tell me which ROM i will need as the ones i have to run the ROM update but it comes back saying connect to ActiveSync which i can not do is there a way round this?
Final got my SPV M600 Working with the ROM from the download area thanks for the help anyway
cheers
just change the usb port to another one and start rom it should pick it up
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Asukal said:
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Click to expand...
Click to collapse
I am sorry to hear that, did you buy it in Taiwan, do you think they will give you a replacement? hope so.....good luck
Asukal said:
today i got Dopod U1000 and tried to unlcok extrom.
And use Hermes Extrom Unlocker and make soft reset.
It could not boot any more with WHITE SCREEN!
No hard reset worked and stop splash screen
PLS guys do not try that.
still can not find the way to reboot
Click to expand...
Click to collapse
Have you tried to hardreset?
c0rnholio said:
Have you tried to hardreset?
Click to expand...
Click to collapse
yes after hard reset satck in splash and no more,,,
i hope dopod replace it but,,,,
How about reflash from boot loader? Hav you treid it?
cornelius said:
How about reflash from boot loader? Hav you treid it?
Click to expand...
Click to collapse
do u have boot loader for Athena?
i didnt tried to athe bootloader coz i dont have,
But treid to flash Hermes Bootloader, on PDA / PC showed me seems succsessufuly, but aftter re-enter bootloader, nothing had changed.
sad to hear that... bricked first day
Have you tried to reformat storage from bootloader, or to flash a rom again?
Asukal said:
do u have boot loader for Athena?
i didnt tried to athe bootloader coz i dont have,
Click to expand...
Click to collapse
See attached: 1.06G4H3 ATHENA SPL DVT Shipped
pof said:
See attached: 1.06G4H3 ATHENA SPL DVT Shipped
Click to expand...
Click to collapse
thanks, tested and still can not boot.
i wonder why only registry canged by CAB can not boot any more ??
it should not damage to device!
(But i have expienrece Himalaya Extrom Unlocker make another device OS read only before)
Any way, tried ways i could think all! and keep on trying other ways.
booteddddddddddddddddddd!
Thanks POF!
after installed your SPL, tryed flash OS OM 3 times.
it can boot!!
thanks POF!
i love u!
Asukal said:
Thanks POF!
after installed your SPL, tryed flash OS OM 3 times.
it can boot!!
thanks POF!
i love u!
Click to expand...
Click to collapse
ahhhh.....
so that means that you will not put your bricked athena for sale on ebay....i was hoping to pick some up for a couple of 100$$$
have fun with your device
fallenczar said:
ahhhh.....
so that means that you will not put your bricked athena for sale on ebay....i was hoping to pick some up for a couple of 100$$$
have fun with your device
Click to expand...
Click to collapse
yes,, you guys save my life!
and thanks for your watching me this stupid one.
T mobile UK Ameo
Hi I did tried to unlock and now I get only a black screen and I can't boot again. I have the old flash image , but I can not connect with active sync my ameo. How can I pump the old flash image into my ameo ?!
Thank you in advance!!!
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
you ARE trying to RUU with a HERALD ruu, no?
Also, if you have a wing or a dopod, you must ruu with the tmobile or dopod variation of the RUU, respectively.
i have HTC herald (not wing or etc) black skin with grey buttons.
i tryed to flash with official wm6 ftom htc.com, and the official wm5, from the net (i dont know the source: RUU_Herald_HTC_WWE_1.8.405.1_02.71.90_Ship.exe)
but, the error is the same: 300, invalid update tool.
my friend sais: my bootloader damaged.
i must get an SD Dump from a HTC herald, same as this device, and then i have a glimmer of hope..
or service repair:|
tmo ruu didnot worked also..
regards
pulyka
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Olipro said:
try mtty
set 16 0
or set 14 0, I forget which, try both
then do
task 8
Click to expand...
Click to collapse
I also got one with error 300
I try set 16 0 and set 14 0 both
then task 8,give me
Invalid command : task 8
For a help screen, use command ? or h
....how?
pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
Help me,I like you
hponline said:
Help me,I like you
Click to expand...
Click to collapse
Hypercore's ROM kitchens has the Herald RUU upgrader... I wonder if that would work...
pulyka said:
Hello
I am stucked in BootLoader mode.
problems:
if i turn on the phone, nothing happens
if i reset the phone, nothing happens
if i hardreset the phone, greean and black sceen with ipl spl numbers.
if i take out the battery, nothing happens..
if i run the original htc wm6 setup or wm5 setup, it makes an error 300, invalid rom update utility.
i only can turn my phone to bootloader mode.
the RUU runs until i push "update" button, and then error 300!
please help me!
thank you
pulyka
ps:
htc wizard has "ROMUpdateUtility_Wizard_NoID.exe"
that is for this problem, i think.
google did not matched in herald like this
Click to expand...
Click to collapse
I also have the same probem.. after using HERALD-USPL-beta3
beucase I want to change langauge GERMANY to ENGLISH.
PHONE IS HTC HERA100
and having same problem as ABOVE.
NEED SOLUTION.. any comment is will be appreciated
Br.
What is your IPL and SPL in bootloader?
Where did you buy your herald?
oddball1 said:
What is your IPL and SPL in bootloader?
Where did you buy your herald?
Click to expand...
Click to collapse
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
DrMobile said:
Its not mine phone.. Its from my Customer he bring phone to me for change language.
before I don't checked IPL / SPL
but after using HERALD-USPL-beta3
NOW IPL IS 1.08.0001 and SPL IS 1.08.0001 is also same.
waiting for the solution..
Br.
Click to expand...
Click to collapse
hello!
Have you ever solved your problem? If yes maybe you can share!!!!!
Or any solution for this yet? Please I need help.
Br
keke
dear friends,
i have just bought the htc p4350 and noticed that when i boot the the device it does not display anything i.e the ipl, spl , gsm etc
my question how should i flash the device with the cooked roms available here without bricking the device
thanking all in advance
thanks and regards
faizell
Are you looking for this info when you turn the device on (looking at the splash screens) or when you put the device in bootloader (tri-color) mode? As far as I know, the splash screens won't show any info, but if you put the device in bootloader mode (hold down camera button and soft-reset with reset hole) the IPL and SPL should show up. Not sure where else on the phone to get this information other than running the RUU.
And it's definitely a good idea to check those numbers out before HardSPLing.
faizeliza said:
dear friends,
i have just bought the htc p4350 and noticed that when i boot the the device it does not display anything i.e the ipl, spl , gsm etc
my question how should i flash the device with the cooked roms available here without bricking the device
thanking all in advance
thanks and regards
faizell
Click to expand...
Click to collapse
lennyjaxn
thanks so much i have the ipl and spl which shows 4.24
now i will get back to reading how to flash it
i had the imate kjam and whenever you soft reset the phone it would dispaly the ipl,spl etc on the splash screen hence i presumed that this also should apply for the 4350
thanks once again
regards
faizell
No problem! Glad I could give something back after the tons of help I've gotten from this place!
I can understand your confusion, for sure. I had another phone that showed that info on the splash screen as well.
I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?
bird_9527 said:
I just occur the problem just like as minhanh_tran have happened.
when I flash a Orange ROM to my T01A, it entered white screen and began downloading, and when it finished it give a messege that the phone will restart automatically.
all this looks like boot right,but after restart the screen is blue screen,that mean I can see the backlight is open,but the screen have nothing,without the docomo logo or toshiba logo.....
when I try the method as minhanh_tran and stepw said, I push out the microSD,and short the pin 1 and 3,connecting the usb to my pc, then the PC find a new hardware, hinting that I enter DL mode and I should give TG01 DL driver.....so,what should I do?
Click to expand...
Click to collapse
Mmmm, did you try to flash a rom by pin recovery method?
arag0n85 said:
Mmmm, did you try to flash a rom by pin recovery method?
Click to expand...
Click to collapse
yep，I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...
bird_9527 said:
I push out the microSD,and short the pin 1 and 3
Click to expand...
Click to collapse
You should NOT remove micro SD...
You need to put your official Rom on the micro SD and then short the pins...
bird_9527 said:
yep,I have try using this method.
and I can enter the downloading screen and can finish downloading,and then the screen give the right messege"flash successful , the phone will restart automatically".......but after restart, the phone is still back screen, I can not see the toshiba or docomo logo...
Click to expand...
Click to collapse
Did you try with a diferent ROM?
right
arag0n85 said:
Did you try with a diferent ROM?
Click to expand...
Click to collapse
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....
bird_9527 said:
I have tried all kinds of ROM, including ORANGE\GERMEN\DOCOMO official ROM,all this can download to my t01a, but after restart, the screen is still black and can not enter the docomo or toshiba logo and can not open....
Click to expand...
Click to collapse
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.
arag0n85 said:
Rare thing... but if you can flash properly a DOCOMO ROM, i would recommend you to use the "toshiba service", they don't have a way to know if that happened while you were updating your rom or flashing a custom ROM. Anyways, I don't know what should be happening, you should try to use .enc extension in your DOCOMO original ROM just to try.
Click to expand...
Click to collapse
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.
yep
minhanh_tran said:
I have tried many ROM, by all the way (pin 1+3, change ROM file to *.enc, bin...) but after ROM have flashed successfully, it restarts and nothing more, only backlight.
Click to expand...
Click to collapse
my t01a just like as your condition......waiting for the solution tools......
congraturation!