Related
Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian
If you don't mind explaining more detail on the step that you have done on flashing your universal, maybe someone can come up with some help.
bambacik said:
If you don't mind explaining more detail on the step that you have done on flashing your universal, maybe someone can come up with some help.
Click to expand...
Click to collapse
Here is little explanation about upgrade process;
I upload firs and second file and it was 100 % success, but when I upload the third file in the middle something happen and message appears " restart your device" or somethink similar.
After that device dies, I try all combinations for HARD RESET and BOOTLOADER menu but without success.
Please any HELP
BR
Julian
Press camera+power and soft reset and check if it get into bootloader where u serial top.
hdubli said:
Press camera+power and soft reset and check if it get into bootloader where u serial top.
Click to expand...
Click to collapse
not working this combination any other ideas ?
Thanx in advance
Not camera+power+reset, but backlight+power+reset.
bambacik said:
Not camera+power+reset, but backlight+power+reset.
Click to expand...
Click to collapse
Same ... I tryed all the combinations to enter bootloader, but... no success
BatRambo said:
Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian
Click to expand...
Click to collapse
A) Plug your phone into your computer via USB.
B) Press the Power and the light button, not the camera.
You should see a faint outline that says USB.
It's now recognized in the Device Manager, run your ROM Update and fix it now.
Where is the "light" buttom? Please.
BatRambo said:
Hi all,
I have dead JASJAR dead after ROM UPDATE.
I cannot enter bootloader menu.
Please any help
Thanx in advance
BR
Julian
Click to expand...
Click to collapse
I had the same problem b4:
try this:
1) plug the usb cable in 1st
2) soft reset the imate (the screen should have a very light "USB" word)
3) run the rom update on the PC
4) after completion, hard reset (press the 2 "-" buttons on the imate) and press the soft reset bottun together.
5) when the screen is re-set, press "X" to exit instead of "0" to go to factory default.
still no solution
only jtag solution can turn on the phone
and i think its possible only in service center
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
muslim2009 said:
with big mistake i was flashing my ELF with a wrong rom( svp s650)..
it unbootable I tried everytings hard reset soft reset nothing changes: = (just the green light that stays on ..
help plz and thanks
Reply With Quote
Click to expand...
Click to collapse
Hi
Sorry to hear your problem, try to read this guide http://forum.xda-developers.com/showthread.php?t=406721 and the stickies in the Elf Upgrading
Hope you can save your device
i have read it but i dont find the sollution :=(
can you help me plz ????
muslim2009 said:
i have read it but i dont find the sollution :=(
can you help me plz ????
Click to expand...
Click to collapse
Hi
Does it go into bootloader (3 colors )?
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(
nothing again
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
muslim2009 said:
no no bootloader...
just the green light that stays on
i was tried bootloader and soft resest and hard reset nothing :=(..
if you can give a vedio explean how i can result this problem..
and big thanks from morrocco
Click to expand...
Click to collapse
Hi muslim2009
I tried a few searches but all the results say you need the bootloader screen , are you sure you didn't miss a step in hard reset or bootloader mode :
To enter the bootloader:
Hold down the camera button and reset device with the stylus. Keep holding the camera button until you see 'tricolor' bootloader screen.
An alternative way to enter bootloader:
Switch the device off by long pressing O/I (power) button. hold down the camera button while pressing the O/I button about 1 second. Keep holding the camera button until you see 'tricolor' bootloader screen.
Alternative(universal?) bootloader(3)
As almost all htc smartphones with onboard camera, when you push and hold the camera(photo) button, and plug in usb adapter. Even a "stupid" usb power adapter will work.
To hard reset:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
I sincerely hope it helps
I was also born in Morrocco at Casablanca and lived there until age 16. Anyway I'll continue searching.
Tito
thanks for help,but it won't work :=(..
[email protected]
add me if i can show you my htc ..
thanks from morocco
I'm not sure if it's possible with the HTC Touch, but I know when I was playing around with an old iMate SP3i (smartphone) I was able to do a ROM upgrade from files on the memory card.. Took me a few attempts to get it right, but it worked. I think I also upgrade my SP5 to WM6 from WM5 that way, but I'm not too sure about that.
Either way, a basic idea of what I'm talking about can be found here, but that is obviously for a different phone.. Maybe some of the more common members here would have better luck finding a similar process on a Touch....?
maybe its will be workin but what marterial i will need for this opperation??
On some HTC devices (cheetah, for example) if you put the ROM file (.bin) in the root directory of the SD card, the phone will flash directly from the SD card.
I think you do require to put the phone into bootloader for that to work though ... not 100% sure, but probably worth looking up.
Ok... Been trying to search for more information for you, but with not really knowing all the correct terminology it's taken me a while longer than I thought. I've found two threads that have some of the information I was looking for:
Recover / Revive your dead / bricked HTC ELF or ELFIN
Recover HTC Touch from tricolors RUU boot-loader (Mtty)
The second link is actually found inside the 2nd post (I think) of the first thread I mentioned here, looks like they are linked in some way. Your best bet is to read through and see if it is something that may help. Let us know if this works for you...?
thanks you man,i was read the first link befor..i will see for the second
hope will work.thank you again
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Caid444 said:
You're going to have to be more specific than "it doesn't start".
Does it turn on? If so, does it hang at the htc magic screen? Can you hold vol-down and press power (while still holding vol-down) and load a screen with three androids on skateboards? If you can do the last step, it's not bricked, and you should look at the thread I have below about bricking and semi bricking, one of the users on there gave a great amount of information on what you can do if your phone's not working right (bricked).
Caid.
444
Click to expand...
Click to collapse
Hi Caid, thanks for the reply! sorry for the short message without details.
Here is the answer for your first question (sadly, the rest of questions can be skipped):
Does it turn on?
It doesn't
It was after follow the guide i mentioned before. I tried to update the SPL, but something went wrong and my phone didn't turn on again.
So... I think I have to accept the fact is not going to work again.
Is there any kind of service able to fix this?
Anibal
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
please i need some help htc touche cruise
hi everyone. I have a big problem with my htc touch cruise when I installed a hard spl htc dedicate a Diamond.donc I had a white encrant after I did a hard reset since my htc no longer I have a black encrant are neither green nor orange but when I connect with the pc I am data interface and it does not recognized my htc. In my pay is not qualified repairman three non réparé.aidé unable to please me I tried the commands mtty.exe but does not c I do not really know how it works.
thank you for your patience and for help
parrot5 said:
No display at all? no backlight on the screen? no vibration (signifying it's past a certain point in the loading stage)?
You probably tried taking out the battery for 10 seconds and then putting it back?
As Caid444 asked, tried holding Back+Power for a few seconds (after making sure power is off and not just hanging. Take off battery for 10 sec and reload)? Tried holding Home+Power after making sure power is off?
Click to expand...
Click to collapse
I'd really like to say it DOES something... but it doesn't . I tried Volume down + power, back + power and several more combination always taking out the battery and putting it back.
It's bad... Do u know if there's any hardware service for this?
Just a wild guess, but since the phone sucks more battery, then a vampyre on rampage.
Could it be an idea, to charge the battery before, or have the usb cable pluged in, when you press back+home? (the same buttons you used to enter fastboot)
I'm pretty sure what you're trying to say is, you know enough about the phone to know how to bring it into it's multiple boot options, and none of them make the phone even burp. So there's no need to tell you to press this button plus that button, or insert usb or remove usb, or battery or such, because you've already done all that.
Well, I'd have to agree with you that it's dead. Unfortunately, there's nothing to do at the moment. I'm guessing (or maybe just hoping) that in the future there will be an unbricker for our phone, much like those available for many htc branded winmo phones. In the meantime, how old is your phone? Can you still bring it back?
Caid.
444
p.s To anyone else who's trying to figure this out, let's assume that he's already tried the many variations of recovery procedures and that it's still not working.
argc79 said:
I've got a "Brick" HTC Magic - Vodafone.
Basically, when i press the power button doesn't start. It happened after follow the "Install / Update SPL" ( http://code.google.com/p/android-roms/wiki/SPL ) guide.
Is there any way to recover it? or should i put it on the bin?
Click to expand...
Click to collapse
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade?
(I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
That's how my brick arrived ! Tried Hard SPL, after installing the one you suggested. Yours okay, Hard SPL no. But even after installing the spl, no fastboot adb.
BRICKED by HARD SPL ( the recommended )
Same here, I have just bricked my new vodafone HTC Magic (Vaffanc...)
downloaded from here: http://code.google.com/p/android-roms/downloads/list?q=label:SPL
I hope something can be done. It is not reacting to power button at all.
Amon_RA said:
If it's really a brick and we all want to learn something from this then we need to know the following :
1. What was your original SPL
2. To which SPL did you "try" to upgrade? (I hope you didn't try to flash a G1 SPL on your Magic...).
Click to expand...
Click to collapse
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
byronhero said:
I think you are right, I have flashed the G1 SPL. But the page is really not clear, it start speaking as Dream/Magic and probably it is only for Dream. Since it says to apply the Hard Spl and in the download link(http://code.google.com/p/android-roms/wiki/SPL) there is no clue that it is not for the G2.
Any idea? anybody got it changed from the shop with no problems? (mine is vodafone in the netherlands)
Me idiot, I have to leave tomorrow for holidays!
Click to expand...
Click to collapse
as far as i can see no need to flash spl on vodafone magic. i have the same phone and all i did was root with Rav1.1.1G.img and flashed rom of my choice. you have flashed phone with g1 spl and it actually says g1 on the link you provided..........can't see how you missed it. with phone off press home+power button as that bring up recovery image. Rav image file is safer due to that. i am sure if hardspl was available for Magic it would be posted on here as a sticky
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
You did brick one with the hardSPL and now you bricked another with the same stuff? Didn't you learn the first time? Only way is to go back to the store and tell em you did it again.
thanant said:
hi
all
i have been recevied new htc magic phone from vodafone on line contract . after i done hardspl my device gone blank not power back on . and change amber light it working .... but i cant power on my device how can i reset device with go gui mode ? i had update hardspl from follwoing link http://code.google.com/p/android-roms/wiki/Install_Hard_SPL . i cant take it vodafone shop becoz just week before same happen so this is my second new phone . please help me if know any other idea
thank you
dana
Click to expand...
Click to collapse
It seems to me you need to go back to basics and start here
A noob question but what exactly does flashing a new SPL unlock.
I got my Vodafone UK HTC magic and simply Downloaded a 32B ROM and used nandroid backup to apply the update.zip and it installed fine and can use Root required apps.
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
I Can not understand how can this be possible. Why guys all of you, don't read before trying to change your SPL???? You even don't need any changes about it?! Why do you try to change the SPL? Do you know what that SPL does? I think most of you - don't.
My next question is why all of you are trying to flash the G1 SPL onto Magic phone? Are you crazy or what? There is NO HARDSPL for Magic (G2, Sapphire or whatever you want to call this device)!
The SPL collection is posted in this forum by Amon_Ra, and if someone want to change the SPL can do this by downloading some of the SPL collections posted here.
say2k said:
hi all
My HTC magic was bricked after update SPL. Now when press power button, it stuck at HTC magic logo, anyone have solution for fix its?
Click to expand...
Click to collapse
Power off your phone! Then press and HOLD the "back button", while holding it press once the red one(which you usually use to power on the phone). It will power on (i hope). If you get in fastboot mode then everything will be fine.
hi,
my HD mini got problems with the "sleep of death" I tried some some things and after I formatet the SD card, I thought my SOD was gone.
But tomorrow my device wath off, so I tried to put it on. it vibrates, the HTC logo appaeres (only HTC, no quietly brilliant) than the screen freezes for about 10 seconds and the deviece shut down. I made a few hard resets, but everytime the HD mini wants to restart its the same.
I hope anyone knows about that problem.
Daphoz
Daphoz said:
hi,
my HD mini got problems with the "sleep of death" I tried some some things and after I formatet the SD card, I thought my SOD was gone.
But tomorrow my device wath off, so I tried to put it on. it vibrates, the HTC logo appaeres (only HTC, no quietly brilliant) than the screen freezes for about 10 seconds and the deviece shut down. I made a few hard resets, but everytime the HD mini wants to restart its the same.
I hope anyone knows about that problem.
Daphoz
Click to expand...
Click to collapse
try to remove the SD card and restart the phone
tzacapaca said:
try to remove the SD card and restart the phone
Click to expand...
Click to collapse
I did that already, I also tried it without simcard. unfortunately without succes.
Daphoz said:
I did that already, I also tried it without simcard. unfortunately without succes.
Click to expand...
Click to collapse
Sounds to me like you need to reflash a stock rom.
when powering on hold vol up to enter bootloader then flash official rom.
bruce2728 said:
Sounds to me like you need to reflash a stock rom.
when powering on hold vol up to enter bootloader then flash official rom.
Click to expand...
Click to collapse
first question: where do i get the official rom, or is it left an the device?
second question: when i press vol up and power nothing happens, so I thought try the other direction (vol down and power) so I get red,green,blue and white beam.
at the red beam:
PB92100
SPL-1.31.0000
ENGID 0xF
PCBID 0x80
at the green beam:
MicroP(LED) 0x05
TP SYNAPTICS
at the blue is nothing
at the white:
serial
I can´t do anything on this screen.
yep its vol down for bootloader sorry
you can get official roms from shipped-roms.com
once you have downloaded to your pc unzip the exe with winrar and extract ruu_signd.nbh and flash usin dft_sspl_mini which can be found with a quick search of the forum
hope this helps
try to search the dev forum on the rom, flashing using sd card. it might help. been there done that...
http://forum.xda-developers.com/showthread.php?t=1041988
OK, thanks for all your help.
As I posted in another thread, I started my HD mini is ok, since wednesday evening. I can´t say how I solved the problems, I made a few hardresets and suddenly it works fine. Now I test some things step by step to look whether I can find the reason. At the moment I guess it´s something with the sd card...
If I will find something I will tell you, perhaps its helpfull.
http://forum.xda-developers.com/showthread.php?t=1092430
I have the same problem, but I don't know how to solve it!
I have the same problem, because I wanted install android to device, but after I install recovery the phone didn't boot up! :/
Pls help me!!
Erkaft95 said:
I have the same problem, because I wanted install android to device, but after I install recovery the phone didn't boot up! :/
Pls help me!!
Click to expand...
Click to collapse
I thought that I answered you in your Thread.
Hi everyone got a bit of a problem and would appreciate a bit of help , My acer s200 is unresponsive now , no blinking lights, nothing. I was in the middle of updating to ROM - English 3.003b.00.EN when it got accidentally disconnected.
I have had a look on the forum but had not luck finding anything that will help me out.
Any help would be apprerciated please.
tmmv1 said:
Hi everyone got a bit of a problem and would appreciate a bit of help , My acer s200 is unresponsive now , no blinking lights, nothing. I was in the middle of updating to ROM - English 3.003b.00.EN when it got accidentally disconnected.
I have had a look on the forum but had not luck finding anything that will help me out.
Any help would be apprerciated please.
Click to expand...
Click to collapse
hard reset the device and take it to go back to the bootloader mode, then flash rom again
try to follow the guide to flash rom http://forum.xda-developers.com/showpost.php?p=6138942&postcount=4
Hakim Rahman said:
hard reset the device and take it to go back to the bootloader mode, then flash rom again
try to follow the guide to flash rom http://forum.xda-developers.com/showpost.php?p=6138942&postcount=4
Click to expand...
Click to collapse
Thanks Hakim Rahman for the reply and link. I have 2 more questions what is the best way to hard reset the phone please? I have seen quite a few different ways to do this which i have followed with no luck as of yet. Also what is the best flash rom to use?
I have tryed to hard reset using the methods below which i think is the correct methods but still my screen is dead
Method 1. "Reset by pressing button combination Hold the Volume up and Volume down buttons while pressing reset until the screen shows “Clean Boot”.
And this way
Method 2. Hold vol up and vol down and press power.
Anyone please point me in the rite direction for the hard reset that will actually work please?
tmmv1 said:
Anyone please point me in the rite direction for the hard reset that will actually work please?
Click to expand...
Click to collapse
seems correct, but to make sure you try to look at http://www.hardreset.eu/acer_s200_hard_reset_soft_reset_en.html
Thanks once again for your reply and help Hakim
My phone has nothing happening at all it is completely dead, the battery was charged before it went off so i know that is still charged. I can't believe all i done was caught the wire and it came out of my phone while i was updating it to the latest Rom that i downloaded from Acer So will the hard reset still work even though nothing is coming on at all on my phone? The phone at the moment does not even light up Surely it can't be broken all together can it?
please help me, my acer s200 is stuck in clean boot. i need to install a new rom but i dont know how and i dont have a new rom. please help me i need an english rom. my email is [email protected]