My Jam has recently decided that I dont' have any bluetooth hardware.
I have seen people complaining about this problem after they updated Radio or ROM - but I haven't done a single thing with my JAM. What they hellis going on. This thing is total piece of garbage....
you need to soft reset it
i have the same problem plus i have no audio on my phone..you can say that again man. abviously i already made a soft reset been doin it for 2 days now! damn! :x help anyone?
This is total garbage. How can a phone just start malfunctioning like that for no reason? This is pathetic.
I have an experience as: I have installed the radio scheduler which I can set to turn BT on and off as pre-scheduled. During the time the BT is off as scheduled, I manually turn it ON then the device say: No BT Hardware. During the time BT is ON as scheduled, I turn it OFF then ON again, no any problem's arised. When I uninstall the Scheduler software, everything's OK. But because I need radio scheduler application to turn GSM/BT ON and OFF automatically as my schedule so I decide not to touch the BT Icon in the bottom tray when BT is off. Without that problem the software run perfectly.
My XDAmini's BT is perfectly paired and worked with my Jabra BT 258. For Async function with my laptop, I use BT Tool 1.0 patch.
So for your cases, I think there is some software have been installed to turn ON/OFF BT function in lower level than the Microsoft's BT stack. Then when MS's BT stack come to check the hardware has been turn OFF, it found NO BT Hardware.
Hope the explanation may help.
I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?
Normally the issue was going to be fixed
Normally the issue was going to be fixed in the 1.06 see reporting on issue
Well.... I had the same message before when I upgraded to MA_DANG_WWE_10600_115_10500_SHIP. Then after a hard reset the problem gone. But his rom is not so stable.
Now I'm using the ma_cdlsku1_10600_110_10500_ship but override with the US radio to 110. And I can say is the most stable I had try on others.
After every soft reset my BT headset will paired by it self with my XDAmini, not like the others which I need to pair on manually. But only one thing is when the BT converage is out of range it had to pair them again. Anyway this is better then nothing.
Note: the radio 110 overiding is not for BT improvement. Just that is for the radio signal upgrade.
Hope this help.
When you want to enable the bluetooth try to make it also discoverable to other devices. This will enable for sure the blue tooth and you will not get again a "No bluetooth hardware" error.
Not true. I have mine discoverable, but this problem seems to occur randomly.
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
bogs said:
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
Click to expand...
Click to collapse
Explain de REGISTRY trick on the prog you install. Give us more information please
what error are you getting? i modified the registry because i had an license expired error..if thats not the error dont bother with the registry. anyway about the bluetooth device not found error i found out the SKtools application is doing it..so the easiest way would be a restore registry on the SKtools app then soft restart.
how long does it take for you guys on a HardReset to get to the startmenu?
Same problems here:
1- No BT HW found
2- BT SW detects Flight Mode on and a message pop up saying to turn off FlightM to activate BT...but FlightMode is turned off yet! than the message is in Spanish and my ROM is Italian....
Really an annoying problem!!!
I hope that HTC has been informed about this!
Today, i've got one more this error. I'll made a screen copy when it happen.
When the problem occurs, there is no possibility to select bluetooth, all is grey
How does i take a old bt manager (before upgrading it works very well)
Tx
Related
Hi,
I've recently purchased an xda 2 from O2 it came with a free bluetooth headset, but I've a few problems and wondered if anybody could answer a couple of questions.
1. The little blue flashed LED, is it meant to flash all the time that bluetooth is being used? It seems to start flashing and then just stop.
2. When I go into my bluetooth settings and turn it back on when it's switched itself off I don't get the LED flashing then I go back into the settings again and it says that it's off. Is this what it's meant to do?
Any good guides/tools about using bluetooth with this device?
Beginning to pull my hair out and I've not much to spare!
Cheers
Marc
Free? from O2? how?
1stly howd u manage 2 get sumit out of O2 for free? i would be worried about that allready!!
what bt Headset did u get? with mine, i get a blue light flashing intermitently when the headset is turned on, and it doesnt change when im making a call.
which bt settings are you talking about? obviously you need to have bonded with the device, which the headsets instructions should cover.
to turn bt on the phone on you click on the bt icon at the botom of the active screen and select the On radio button.
if headset profile is enabled then there should B a small blue headset symbol next to the bt symbol, if its not set, or not turned on then it will be gray. if it is gray then click on it and hopefully it will turn blue to activate the headset profile.
there are sum interesting bt tools around, but the "recomended" setup is the Pocket Bluetooth Tools for the O2 XDA II and the MDA II which is available from here:
http://bluetooth.i-networx.de/index_e.html
I hope that helps.
Smiley
sounds like you are using bluetooth tools and have got the clock symbol live (not greyed out), it times out the internet connection but doesnt seem to tell o2's software that it turned it off so when you go in, it quite often seems to think its on when its actually off !!
Hi, I didn't have the bluetooth tools loaded, but I've downloaded them from the site you suggested and everything seems to work better.
The headset did indeed come free from O2 I was quite surprised too.
I've think I've attached an image of it, not sure what make it is does BlueTrek sound good?
Yeah that sounds about right, their website doesnt actually give any details, helpfull as allways!! :roll:
neway, have u got everything working properly now?
Smiley
Hmm...somebody had the same problem with his Bluetreks G2 and the XDA2.
He did a special pairing mode and it solved the problem.
I think its in the G2s instruction manual.
Had a look at the manual can't see anything special in the way that you pair the G2 to the XDA2.
Do you use this bluetooth toolkit?
It still seems flaky, I tried answering a couple of calls with the headset yesterday and nobody could here me at the other end of the phone. Sometimes I get it where the phone says that I have "no bluetooth available" I have to remove the battery and insert it again. Is this normal?
Regards
Marc
Marc,
I get the same symptoms you describe when I'm using ActiveSync with my XDA2 over bluetooth, but never with my HBH-65 BT headset. I'm not using any additional bluetooth tools or anything like that. Just the standard built-in bluetooth on my original (November 03) ROM.
Sometimes if my bluetooth ActiveSync connection is idle for a while the connection drops and the flashing blue light on the XDA2 goes out. However, if I tap the little blue BT icon at the bottom of the Today screen, the setting shows that BT is still turned on. I have to tap it on, then off then on again to cycle the status and convince the machine that bluetooth is really back on again. :? This sounds like the problem you describe.
However, no problems like this with my BT headset, which works perfectly.
This isn't any help, but at least you know you're not alone!
Does anybody know if a registry entry exists to turn the bt headset profile on and off?
I've got headset working now but it switches off frequently.
Cheers
Marc
I have a BlueTrek G2 for my Imate and it's working with no problems at all ... I tried BT tools but didn't find it useful as I thought it will give me a "Hands free" profile but it doesn't :x
mokl: maybe it's a ROM issue ... mine is 1.72 WWE, what's yours ?
The rom version is 1.60.00WWE
Just to let everybody know, I had some major problems with my bluetooth on my XDA 2. Tried everything, eventually got a replacement from 02 and the new one works fine now, so it must have been a hardware fault.
Hi .. anyone have an idea.. ??
Or have same problem ?
I got a message saying that no BT hardware is installed on the phone.. when trying to enable it ..
A soft reset fix it.. .. but even if I dont touch the s100 it get this after some time.. any clue..
Hardware or software glitch ??
Regards Carlis
mine sometimes does this i just click the bt icon again and it works? :?
gazzaman2k said:
mine sometimes does this i just click the bt icon again and it works? :?
Click to expand...
Click to collapse
I notice that if I go in and remove klick in inbound BT port , shut down BT and restart it .. .. I can use BT again if I stop it ( well strange it was off.. ) and start it again ..
This got realy bad after the Qtek s100 update.. .. but was there before to..
Hope it not Hardware.. .. hate if I must send it away..
Carlis
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
I only have this problem when calender+ 2.2 is install. have not try the 2.3.
cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.
thx.. guys... I even reflashed it to if it got bad under the upgrade... I will also call in the problem tomorrow... not to brightpoint.. as my was imported and uses Dangaard Telecom Swedens ver of the upgrade... same bug in both BT software...
Carlis
bamse said:
cpes said:
Well, I have the same problem. After updating with the new ROM-file my Qtek says: There is no BT hardware on this device. Strange!! Something wrong in the new ROM-file?
Before updating I had no problems whatsoever woth BT.
Peter
Click to expand...
Click to collapse
I have the same problem since updating. If I leave BT off for some time (hours?) and then try to reenable it I am told there is no bluetooth hardware. After a soft reset everything is ok.
Gonna call Brightpoint tomorrow.
Click to expand...
Click to collapse
Sent a mail to Swe Qtek support about it.. let U know what they say..
Carlis
I have the same problem..
I also have this problem (sometimes working, sometimes not working after soft reset), and also have Calendar+ 2.2.3 installed, now I removed it, let's see if it will happen again.
A way to get pass the new BT patch..
Hardreset
Softreset when Unit says its done after Screen align and timezone etc.... before the ExtRom load.
Install all cabs in the now visible External Rom folder exept the one named:
Default_Patch_bthusb.CAB .
You now have the old BT and all other is updated.
Or ..
Live with the new BT patch and do like this:
Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated.
Works 90% for me.
Carlis
Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!
5 soft-resets later and my BT-module is working again. Strange ****.
Same thing here sometimes...
Hi everyone,
my Austrian T-Mobile MDA compact (original firmware, no "cross-update" or whatever) also has this problem sometimes. There where some resets too, when switching on the device after using a BT headset (turned BT on -> connected BT headset -> made call -> endet call -> switched MDA off, while headset was still on -> switched MDA on -> imediate "auto-softreset"). By now I haven't realised, what's the reason for it, but I will take care.
My guess at this moment: Something's wrong with handling of bluetooth headset connections or/and suspend handling.
I'm really asking myself who the f*ck is responsible for the fact, this beautiful little device is stuck with this crappy MS bluetooth stack (missing profiles, buggy like hell, etc.)...
I got tired with the bug and now I leave my BT on 24/7. My old habits of keeping my phone charged makes this ok for me.
I occasionally got this bug both before and after the upgrade to 1.06.
I simply switch off the power and on again. The bluetooth is the back. It works every time for me.
In setting.. U have 2 BT settings.. one for PORTS and one for manage devices and turning bt on and off.
activate a bt inbound port or outbound port under settings... system .. bluetooth settings.. to get bt back..
I now use Bluetooth switch by buzz_lightyear to manage the bt.. ,no more bt hardware error
Love this little soft.. Thank U Buzz.. !!!
Its even a huge + to use it .. soooo easy to enable and disable bt.. both in discover and hidden mode..
It can be found in the forum.. Even using hes replacing BT icons.. realy well looking..
Thx again Buzz..
pell0 said:
Carlis:
I don't really understand what you are saying..
After upgrading (Dangaard update) I get the Error: "There is no Bluetooth hardware installed on this device." - as soon as I click the bottom icon in today-screen. Same if I try Bluetooth icon in Settings -> Connections -> Bluetooth.
How do I ;
"Start BT.. activate ... and unactivate .. shut down BT settings.
Start it and now it can be activated. "
?
All help is very appreciated!
Click to expand...
Click to collapse
Is there a fix?
hey all,
I get this intermittant problem too... probably because I leave bluetooth off 95% of the time.
My XDA 11 is running ROm 1.60.00WWE, with ExtROM version 1.60.44
Soft resets seem to make little difference.
Does anyone have a easy and comprehsible solution to restore the 'missing' Bluetooth hardware?
Thanks
tym
Guys
Since the upgrade, everything has been working great, with the one exception that the bluetooth pairing with my BT car kit (Parrot CK3300) keeps dissapearing from the XDA.
It works for a few days (using TomTom 5) then it suddenly dissapears, and I have to set it all up again.
Any ideas?
Ta
they is quite a few of us in the same boat, i have tried a few things but am stump now just waiting for parrot to release a new firmware for the ck3300
Thanks
Paul
Try to upgrade Radio to 1.11 , it's responsible for BT too.
Has anyone any experience of this while using Radio 1.11?
This all worked fine until after the ROM upgrade, so is it likely that the Parrot will need an upgrade?
It works ok for a few days then the XDA suddenly bleeps when it tries to connect with the car kit, then there is a dialog box on the XDA screen asking for the passcode to pair up..., I've put the password in (1234), but it always fails... then thats it ... pairing lost
Any clues anyone... this is really starting to frustrate me :x
Ta
1.11 fixes it, but...
When I upgraded from the stock O2 ROM to the T-Mobile one, I found that when ever I switched off my GPS unit, I needed to re-pair it for it to work again. Upgrading to the 1.11 Radio Rom did fix this. Never had a problem with headsets.
But I've also been having some weird power problems - battery going down by 10%+ an hour. Mostly it turned out to be on days when I used wifi in the morning - I'm pretty sure using the new radio dialogue didn't actually switch off the wifi radio when you disconnected. 1.11 does fix that. But also sometimes switching off the phone didn't actually switch off that radio, and power would dissipate way too fast with nothing supposedly on. Doing a soft reset always allowed me to leave it over night and only see 1-2% power gone.
So I've just backed down to the original radio ROM from the original O2 installer. I'm hoping this will solve all my problems, at the cost of the less resilient changeovers from UMTS to GSM.
Ta,
Mark.
i think i have cracked this, my phone has now been connected to my ck3300 for 5 days solid now
here is the post on the parrot forum
http://www.parrot.biz/forums/english/viewtopic.php?id=813&p=4
its at the bottom
Paul
i think i have it pegged have another look at the parrot forum
ok here is yet another update on things.... this is a very strange one. if you enable the device lock start\settings\personal\lock
Prompt if device is unused for 16.7 hours
set simple pin
the phone and the parrot device keep there pairing with no problem at all i have been testing it for the last 48 hours
if you disable the above it loses the paring straght the way.
strange is they anyone else who can try this
Thanks
Paul
I'm using a Parrot R N B, but I have experience the same problem. I have also upgrade to the new radio version, and again the same problem. In fact I can't reproduce the error in a controlled way. It happens from time to time. But more of the time, the Universal connect again to the parrot only assigning again the Parrot as the headset in the Bluetooth manager.
My try now was to install the buzznet.dev cab attached. I'm trying also what buzz said: Do not use the power button to put the Universal off, only close the lid.
I'have 2 days without problems with the parrot. I'll post an update if this also fail.
what parrot do you have? i have a ck3300 running version 1.14d if you can try the above trick and let me know... i could reproduce the error ever time, just connect up 3-4 times and then it would fail..... have not had to worry about the power button trick.
Paul
Mine is RHYTHM N'BLUE, and with this last trick I told you, I add a new day without problems. Today I have started and stopped the Parrot 6 times and always work perfectly.
Hi!
In the last some days i read a lot and found the following :
1. download the widcomm stack from axim site : LINK
2. install it + do a soft reset
3. get a registry edittor (Resco, CECMD etc.)
4. change these values :
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Device=COM
FlowControl=0
Parity=0
Port=1 (This is the most important thing!)
-soft reset
-at the today screen you will find a BT icon, click on it and have fun
TESTED FEATURES
-BT FTP, tested with : SE K750i, hx4700.
-ActiveSync : NOT WORKING
KNOWN ISSUES
-unable to control from comm manager
-blue led not flashing, easy to forget
-a2dp not tested
-tested on aku3.2 and aku2.3 roms, others maybe ok.
-other devices can't download bt services list, but the services works well.
-maybe unable to remove, not tested yet
-turns off, when you trun off your device, that maybe a problem with BT headset.
DO IT ON YOUR OWN RISK
Great news! Posted an announcement to the SP & Pocket PC Mag Expert Blog too!
Problems!!!
I've just installed the bluetoth stack in my phone. I've not yet tested it but i've found two showstop problems:
- activesync doesn't work anymore
- i cannot start the comm manager anymore (when i press the comm manager button in the upper left corner i can see only a small dialog with wifi and bluetooth power levels)
This is what i've done (maybe i did something wrong):
- copied the cab to storage and ran it (installed in device)
- soft-reset (required by the installer)
- edited the registry according to the first post
- soft-reset
I'm using an aku3.2 rom
-----EDIT--------------
Comm manager is working again. I had to reassociate it in Start-Settings-Buttons
Still no activesync (over USB at least)
bye
bye
Has anyone else tried this then? Has anyone tried the hermes cab install found in here...
http://forum.xda-developers.com/showthread.php?p=1072292#post1072292
There has been reports that it works on the trinity as well, so it may work on the Wizard.
Edit: No it doesn't. I have just ried it and it gives the memory error.
took the plunge and tried it
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
new2city said:
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
Click to expand...
Click to collapse
Did you try tweaking the BT params (for example, lowering the bit speed) to see whether it would work at lower bit speeds? See my related articles.
got look out for the links to your tips and tricks again
Hi Menneisyys,
Surrendered on Widcomm stack almost 2 months ago, now have to look again for the links for your tips and tricks for the Widcomm stack again...
Any idea on how to restore audio to my speakers... still dead at the moment... sigh... don't want to restore my back up yet...
i found that you don't really need to remove the shift* keys. if you already removed it, download the BTSpeedSwitcher from the download link, and set the speed to 921600bps. that may help.
Got it working fine
Thanks, but now I am a bit unclear, but will clear things up later. I used the speedswitcher as you suggested and but I had to disable audiogateway before it could work... now I am stuck as I put my wizard into standby and now it won't come back.... on... doh!
Well, one thing I can confirm, you can put it into standby and the bluetooth is still on.......
will feed back more when I get a clearer picture of what happened.... The sound quality is great..... just skipped for a second but is not back to normal again...
My wizard has now a nice quality A2DP sound without the high pitch noise...
went to http://forum.xda-developers.com/showthread.php?p=1073003&posted=1#post1073003
and used the files from Superdave... all is well now... look at my reply at the hermes thread.. Now I will just back up this "working configuration" and retry these settings on the cab from Aximsite... All the same, thanks to the legendary Mikelspikel
Just wanted A2DP to work so bad.... and it does now. nicely..
new2city said:
Got it working
Click to expand...
Click to collapse
Okay, when you get time can you stick up how you got it all working? Many Thanks!
Ive installed the Superdave BBS_HERMES_03.CAB file and then modified the registry to use the above settings but every time i do the soft reset, the registry settings go back to the original values. Im stuck here.
Oh and i am using the last T-Mobile UK rom. (2.0 i think)
Edit 2: Now got it working. I had to kill voicecmd and cprog for it to load without giving the memory issue!
new2city said:
you can put it into standby and the bluetooth is still on.......
Click to expand...
Click to collapse
as it should - BT is on on PPC PE devices in standby mode, unlike on plain PPC's.
peetking said:
-unable to control from comm manager
Click to expand...
Click to collapse
It looks like comm manager is just an HTML document in the /windows directory. (Should be simple to redirect the button)
Leaskovski
sorry for the late reply but had a few setbacks during the night(I am in Malaysia)..
Got A2DP running all night and by mid morning... suddenly all went to hell..
1) No skipping with your suggestion of using MikelSpikel's speed switcher.
2) While trying to put it to standby to test if BT still works and it hung at first attempt. Something must have happened here as I recovered using the reset button and then suddenly I could get it to revert back to built in speakers and headset without issue. I thought, cool, it is like complete solution...
And then, I decided to backup this "complete solution" with SPB backup.. and after the softreset, I lost the ability to switch between headset and speakers. Then during the night while I sleep and use the headset, at around 3 am... the skipping came back...
and then... I restored the backup and now... got to tackle the skipping again.. never mind the muted speakers..
What linespeed(I use 320 dec), Blocks(16) and subband(8) do you use? I followed MikelSpikel's settings which work ok... last night...
back to the drawing board..
Right, i installed the superdave 03 version and then opened up the registry to make sure the settings matched the ones above. I had to kill cprog and voicecmd to start it without the memory error.
I have tested it now and although it is loading up ok, my headset connection is just not working properly. Its paired ok but nothing is getting routed through. However, my gps bluetooth device paired okay and is working fine with iGO 2006 after doing a detection. Damn shame about this headset! I am using a parrott ck3000.
redo..
Re-installed everything again and now I got a working version, some things to note though on my wizard..
1) I must overclock to 260mhz(battery status method) before I get skip free music.
2) Leaskovski, I had the same problem too in the beginning, where there is no audio getting through. Did you go to Bluetooth Manager and check the status of your headset? i went to mine(ItechS35) and I can see that the Wizard is sending data through successfully but there is no sound coming out of the headset. I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Now hoping to find a way to redirect audio back to speakers when bluetooth is not used..
not tonight though.. its 10.46 pm now where I am...
This doesn't look promising for how i though the BT audio might work with this stack. I was hoping for something like the following...
"A good example of this is MS Voise command running on the MS BT stack. The two devices are paired and connected, however there is currently no streaming. You then receive the text message and MS Voice command reads the message back to you. Just before the message is read, the connection between the devices is made live, and thus the message gets read over the BT headset."
I was hoping that this was going to work for all applications like media player and iGO. I can reproduce what it is doing at the moment using the BTAudio programme that is available on these boards. I just wanted to get around this 'constant' streaming of silent noise.
Damn shame.
Okay for anyone wanting to play with this, here is how i installed and got it running...
1) Download from this thread post http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 the file BBS_HERMES_03.zip.
2) Install onto your wizard and soft reset when asked. Upon the reset, the device will moan at you about not having enought memory to load the drivers. Click ok to close this.
3) Load up your registry editor (i use FDCSoft Task Manager) and make the following mods as stated in the first post...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Port=1 (This is the most important thing!)
If you only want audio routed to headset when there is audio to route then make this reg edit...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugins\handsfree]
Audiohandling=21
4) Do not do a soft reset yet.
5) Now fire up your Task Manager (i use FDCSoft Task Manager) and kill any memory hungry tasks. The ones i kill which then allow me to start the stack is voicecmd.exe and cprog.exe.
6) Now click on the BT icon in the system tray and turn BT on.
Obviously there must be some memory leaks some where in the wizard because a couple of people have said that later in the day, if you try to turn BT on again it wont start due to memory requirements. Anyway, the best thing i can think of is to leave BT on after you have turned it on.
Currently, the blue led will not flash when BT is one. Try not to use the Normal Comms Manager to turn BT one as well as i think this trys to turn the MS stack on which won't work (probably due to memory requirements! )
new2city said:
I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Click to expand...
Click to collapse
I didnt get this to work in the end by the way.
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
new2city said:
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
Click to expand...
Click to collapse
Hmm, i dont have those issues. I am using it with my carkit, so when i turn the engine off and remove the keys, the kit turns off. I haven't had to reset the device apart from when i have turned BT off and then tried to turn it back on again at a later stage (then giving me the memory issue).
My Xperia X1 is great. The keyboard is a refreshing change from the orbit 2/polaris.
Problem - Bluetooth does not stay switched on. This is most apparent when using my Parrot carkit because it does not automatically connect due to the bluetooth being switched off. I have looked through the settings to no avail. Any suggestions? Anyone else with similar problem?
Also the screen switches itself off at such short intervals - possibly to help battery life but it makes reading web pages frustrating at times.
The screen switching off can be changed or turned off in the phone settings.
Thanks for that. The bluetooth issue is real although it may only be on the branded uk ROMs. Anyone else with a similar problem - when I click bluetooth on it stays but as soon as you open up settings or programs the icon disappears (switches itself off). Any bright ideas?
Bluetooth just turns off...
I have the same problem.
The Bluetooth just turns off.
Its a real problem, and nothing i can find either talks about it... or in any setting.
Anyone know of a fix?
My friend at SE Sweden told me that a new FW will fix this. They know about the problem and are working on it.
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...
harvsingh said:
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...
Click to expand...
Click to collapse
Well, that's weird since it fixed the issue for me... still, nice to hear SE's working on improvements.
Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
Can you put what rom version yours is.?
Start /SEttings/device information/Version
and what SE asked from me...
Start /SEttings/device information/customer info
thanks
What works for me is switching off the wifi - my bluetooth has stayed on every since.
I installed the Touch HD TF3D and hey presto.. WIFI and Bluetooth work as wanted with no probs.
So... What does this package do?
any Bluetooth settings or power?
Hello,
i have a german rom ( 1.02.932.3 ) and i have the bluetooth issue too.
daniel
I think this is just a small bug in the SE BT stack. SE phones have an option to turn on BT for 10 minutes or so, maybe this setting was used in the first roms. I hope SE will fix this.
I've got a 02 SE X1 just out, I have the same issue, I can connect to my Parrot 3200and it works fine, get back in to my car sometime later and BT will not connect, 1st I tried switching off the phone, then resets, and finally which works, switching off the BT and back on again (although BT still shows as being on in Connection manager), after that I can finally get a BT connection to the car kit,
Is anyone getting the same problem ?? and is there a patch yet as its really frustrating to do this every other time,
Thanks Mark
Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.
the_flyer said:
Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.
Click to expand...
Click to collapse
Wifi is always off ? I've emailed SE tech support so it will be interesting to see what they say
Does anyone have a problem with the HBH-DS980 bluetooth headset?
On my X1, it only shows Wireless Headset and Hands-Free services. What about A2DP and AVRCP?
I never use wifi, but I still get this problem pretty regularly. It's the only thing keeping me from using the phone.
Also, has anyone else noticed a bug where the email signature you set will not be retained after a soft reset? It always reverts back to the stock Xperia sig.
I have a Xperia uk version and had the same experience, bt went off randomly. I installed Touch flo 3d and now works fine. Switching on and off WiFi has no influence on bt in my case. Also tried bt on + soft reset and still bt went off sometimes.
i have same problem
i have the same problem with the bluetooth, i cannot connect to my car kit (which is SE also by the way!). After contacting SE i was told to wait for the new firmware coming out on the site... this is so frustrating!! how can such an expensive phone have this silly problem??