Database Users

"No Bluetooth Hardware" - and I haven't done any u

My Jam has recently decided that I dont' have any bluetooth hardware.
I have seen people complaining about this problem after they updated Radio or ROM - but I haven't done a single thing with my JAM. What they hellis going on. This thing is total piece of garbage....

you need to soft reset it

i have the same problem plus i have no audio on my phone..you can say that again man. abviously i already made a soft reset been doin it for 2 days now! damn! :x help anyone?

This is total garbage. How can a phone just start malfunctioning like that for no reason? This is pathetic.

I have an experience as: I have installed the radio scheduler which I can set to turn BT on and off as pre-scheduled. During the time the BT is off as scheduled, I manually turn it ON then the device say: No BT Hardware. During the time BT is ON as scheduled, I turn it OFF then ON again, no any problem's arised. When I uninstall the Scheduler software, everything's OK. But because I need radio scheduler application to turn GSM/BT ON and OFF automatically as my schedule so I decide not to touch the BT Icon in the bottom tray when BT is off. Without that problem the software run perfectly.
My XDAmini's BT is perfectly paired and worked with my Jabra BT 258. For Async function with my laptop, I use BT Tool 1.0 patch.
So for your cases, I think there is some software have been installed to turn ON/OFF BT function in lower level than the Microsoft's BT stack. Then when MS's BT stack come to check the hardware has been turn OFF, it found NO BT Hardware.
Hope the explanation may help.

I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?

Normally the issue was going to be fixed
Normally the issue was going to be fixed in the 1.06 see reporting on issue

Well.... I had the same message before when I upgraded to MA_DANG_WWE_10600_115_10500_SHIP. Then after a hard reset the problem gone. But his rom is not so stable.
Now I'm using the ma_cdlsku1_10600_110_10500_ship but override with the US radio to 110. And I can say is the most stable I had try on others.
After every soft reset my BT headset will paired by it self with my XDAmini, not like the others which I need to pair on manually. But only one thing is when the BT converage is out of range it had to pair them again. Anyway this is better then nothing.
Note: the radio 110 overiding is not for BT improvement. Just that is for the radio signal upgrade.
Hope this help.

When you want to enable the bluetooth try to make it also discoverable to other devices. This will enable for sure the blue tooth and you will not get again a "No bluetooth hardware" error.

Not true. I have mine discoverable, but this problem seems to occur randomly.

what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..

bogs said:
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
Click to expand...
Click to collapse
Explain de REGISTRY trick on the prog you install. Give us more information please

what error are you getting? i modified the registry because i had an license expired error..if thats not the error dont bother with the registry. anyway about the bluetooth device not found error i found out the SKtools application is doing it..so the easiest way would be a restore registry on the SKtools app then soft restart.
how long does it take for you guys on a HardReset to get to the startmenu?

Same problems here:
1- No BT HW found
2- BT SW detects Flight Mode on and a message pop up saying to turn off FlightM to activate BT...but FlightMode is turned off yet! than the message is in Spanish and my ROM is Italian....
Really an annoying problem!!!
I hope that HTC has been informed about this!

Today, i've got one more this error. I'll made a screen copy when it happen.
When the problem occurs, there is no possibility to select bluetooth, all is grey
How does i take a old bt manager (before upgrading it works very well)
Tx

Widcomm Bt Stack On Wizard - Howto

Hi!
In the last some days i read a lot and found the following :
1. download the widcomm stack from axim site : LINK
2. install it + do a soft reset
3. get a registry edittor (Resco, CECMD etc.)
4. change these values :
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Device=COM
FlowControl=0
Parity=0
Port=1 (This is the most important thing!)
-soft reset
-at the today screen you will find a BT icon, click on it and have fun
TESTED FEATURES
-BT FTP, tested with : SE K750i, hx4700.
-ActiveSync : NOT WORKING
KNOWN ISSUES
-unable to control from comm manager
-blue led not flashing, easy to forget
-a2dp not tested
-tested on aku3.2 and aku2.3 roms, others maybe ok.
-other devices can't download bt services list, but the services works well.
-maybe unable to remove, not tested yet
-turns off, when you trun off your device, that maybe a problem with BT headset.
DO IT ON YOUR OWN RISK

Great news! Posted an announcement to the SP & Pocket PC Mag Expert Blog too!

Problems!!!
I've just installed the bluetoth stack in my phone. I've not yet tested it but i've found two showstop problems:
- activesync doesn't work anymore
- i cannot start the comm manager anymore (when i press the comm manager button in the upper left corner i can see only a small dialog with wifi and bluetooth power levels)
This is what i've done (maybe i did something wrong):
- copied the cab to storage and ran it (installed in device)
- soft-reset (required by the installer)
- edited the registry according to the first post
- soft-reset
I'm using an aku3.2 rom
-----EDIT--------------
Comm manager is working again. I had to reassociate it in Start-Settings-Buttons
Still no activesync (over USB at least)
bye
bye

Has anyone else tried this then? Has anyone tried the hermes cab install found in here...
http://forum.xda-developers.com/showthread.php?p=1072292#post1072292
There has been reports that it works on the trinity as well, so it may work on the Wizard.
Edit: No it doesn't. I have just ried it and it gives the memory error.

took the plunge and tried it
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...

new2city said:
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
Click to expand...
Click to collapse
Did you try tweaking the BT params (for example, lowering the bit speed) to see whether it would work at lower bit speeds? See my related articles.

got look out for the links to your tips and tricks again
Hi Menneisyys,
Surrendered on Widcomm stack almost 2 months ago, now have to look again for the links for your tips and tricks for the Widcomm stack again...
Any idea on how to restore audio to my speakers... still dead at the moment... sigh... don't want to restore my back up yet...

i found that you don't really need to remove the shift* keys. if you already removed it, download the BTSpeedSwitcher from the download link, and set the speed to 921600bps. that may help.

Got it working fine
Thanks, but now I am a bit unclear, but will clear things up later. I used the speedswitcher as you suggested and but I had to disable audiogateway before it could work... now I am stuck as I put my wizard into standby and now it won't come back.... on... doh!
Well, one thing I can confirm, you can put it into standby and the bluetooth is still on.......
will feed back more when I get a clearer picture of what happened.... The sound quality is great..... just skipped for a second but is not back to normal again...
My wizard has now a nice quality A2DP sound without the high pitch noise...
went to http://forum.xda-developers.com/showthread.php?p=1073003&posted=1#post1073003
and used the files from Superdave... all is well now... look at my reply at the hermes thread.. Now I will just back up this "working configuration" and retry these settings on the cab from Aximsite... All the same, thanks to the legendary Mikelspikel
Just wanted A2DP to work so bad.... and it does now. nicely..

new2city said:
Got it working
Click to expand...
Click to collapse
Okay, when you get time can you stick up how you got it all working? Many Thanks!
Ive installed the Superdave BBS_HERMES_03.CAB file and then modified the registry to use the above settings but every time i do the soft reset, the registry settings go back to the original values. Im stuck here.
Oh and i am using the last T-Mobile UK rom. (2.0 i think)
Edit 2: Now got it working. I had to kill voicecmd and cprog for it to load without giving the memory issue!

new2city said:
you can put it into standby and the bluetooth is still on.......
Click to expand...
Click to collapse
as it should - BT is on on PPC PE devices in standby mode, unlike on plain PPC's.

peetking said:
-unable to control from comm manager
Click to expand...
Click to collapse
It looks like comm manager is just an HTML document in the /windows directory. (Should be simple to redirect the button)

Leaskovski
sorry for the late reply but had a few setbacks during the night(I am in Malaysia)..
Got A2DP running all night and by mid morning... suddenly all went to hell..
1) No skipping with your suggestion of using MikelSpikel's speed switcher.
2) While trying to put it to standby to test if BT still works and it hung at first attempt. Something must have happened here as I recovered using the reset button and then suddenly I could get it to revert back to built in speakers and headset without issue. I thought, cool, it is like complete solution...
And then, I decided to backup this "complete solution" with SPB backup.. and after the softreset, I lost the ability to switch between headset and speakers. Then during the night while I sleep and use the headset, at around 3 am... the skipping came back...
and then... I restored the backup and now... got to tackle the skipping again.. never mind the muted speakers..
What linespeed(I use 320 dec), Blocks(16) and subband(8) do you use? I followed MikelSpikel's settings which work ok... last night...
back to the drawing board..

Right, i installed the superdave 03 version and then opened up the registry to make sure the settings matched the ones above. I had to kill cprog and voicecmd to start it without the memory error.
I have tested it now and although it is loading up ok, my headset connection is just not working properly. Its paired ok but nothing is getting routed through. However, my gps bluetooth device paired okay and is working fine with iGO 2006 after doing a detection. Damn shame about this headset! I am using a parrott ck3000.

redo..
Re-installed everything again and now I got a working version, some things to note though on my wizard..
1) I must overclock to 260mhz(battery status method) before I get skip free music.
2) Leaskovski, I had the same problem too in the beginning, where there is no audio getting through. Did you go to Bluetooth Manager and check the status of your headset? i went to mine(ItechS35) and I can see that the Wizard is sending data through successfully but there is no sound coming out of the headset. I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Now hoping to find a way to redirect audio back to speakers when bluetooth is not used..
not tonight though.. its 10.46 pm now where I am...

This doesn't look promising for how i though the BT audio might work with this stack. I was hoping for something like the following...
"A good example of this is MS Voise command running on the MS BT stack. The two devices are paired and connected, however there is currently no streaming. You then receive the text message and MS Voice command reads the message back to you. Just before the message is read, the connection between the devices is made live, and thus the message gets read over the BT headset."
I was hoping that this was going to work for all applications like media player and iGO. I can reproduce what it is doing at the moment using the BTAudio programme that is available on these boards. I just wanted to get around this 'constant' streaming of silent noise.
Damn shame.

Okay for anyone wanting to play with this, here is how i installed and got it running...
1) Download from this thread post http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 the file BBS_HERMES_03.zip.
2) Install onto your wizard and soft reset when asked. Upon the reset, the device will moan at you about not having enought memory to load the drivers. Click ok to close this.
3) Load up your registry editor (i use FDCSoft Task Manager) and make the following mods as stated in the first post...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Port=1 (This is the most important thing!)
If you only want audio routed to headset when there is audio to route then make this reg edit...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugins\handsfree]
Audiohandling=21
4) Do not do a soft reset yet.
5) Now fire up your Task Manager (i use FDCSoft Task Manager) and kill any memory hungry tasks. The ones i kill which then allow me to start the stack is voicecmd.exe and cprog.exe.
6) Now click on the BT icon in the system tray and turn BT on.
Obviously there must be some memory leaks some where in the wizard because a couple of people have said that later in the day, if you try to turn BT on again it wont start due to memory requirements. Anyway, the best thing i can think of is to leave BT on after you have turned it on.
Currently, the blue led will not flash when BT is one. Try not to use the Normal Comms Manager to turn BT one as well as i think this trys to turn the MS stack on which won't work (probably due to memory requirements! )

new2city said:
I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Click to expand...
Click to collapse
I didnt get this to work in the end by the way.

I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?

new2city said:
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
Click to expand...
Click to collapse
Hmm, i dont have those issues. I am using it with my carkit, so when i turn the engine off and remove the keys, the kit turns off. I haven't had to reset the device apart from when i have turned BT off and then tried to turn it back on again at a later stage (then giving me the memory issue).

A2DP

A2DP is not working well.. when i use ad2p headset the audio fails VERY Much. If i turn off A2DP wmp plays well the music.
Is there any patch?
Thank's!

Fix!
I found this patch! It's not 100% good (sound fails ONLY time to time and drains battery ), but is almost, i think that with some work could get there...
lets make it 100% good...
http://forum.xda-developers.com/showthread.php?t=284974

this patch is not really working for me :/ i tried tons of patches but no go as of yet...
Is WM6 and ad2p no go? does it work better under WM5? or some issues? >.>
Or am i doing something wrong? Has anybody succesfully fixed thier ad2p under WM6?
if yes, what rom, what fixes? maibe radio rom? etc..
Thanks in advance
btw; tried Xplode's rom and now using Helmi's..
radiorom 1.13.. (not sure if that has anything to do with bluetooth >.>)
Xplode's i actualy ran perfectly once.. but never managed to recreate that after repairing my bt620s

thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>

Twistit said:
thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>
Click to expand...
Click to collapse
Use a registry editor and add the following to your BA registry:
HKLM/Software/Microsoft/Bluetooth/Devices
Add a new DWord: DefaultMTU with the Hex value of 2a0
Capitalization counts in te DWord.
BTW, I posted this 2 days ago in this same forum under the "muppet" thread. Search is your friend.

Thanks ^^ ill try it when i get home.. forgot my bt620s today >.>
Geh i did search ^^ but i never figured the Muppets would have anything to do with ad2p *grins* So many random topics in this forum it feels like searching for a needle in a haystack

No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^

Twistit said:
No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^
Click to expand...
Click to collapse
check this page:
http://translate.google.com/transla...arch?q=KB831722&hl=en&rls=com.microsoft:en-us
for some reason this KB article is only in Japanese but google translates it well. This is where I got my information and I can tell you I never have the difficulties yoiu are describing. Try the following steps and let me know if it working:
1. Connect the headset
2. open the media player of choice
3. start playback
4. pause playback
5. wait a couple seconds
6. resume playback
at this point it should play without any pauses/skips (works fine for me, but my BT range blows so bad, and my S9 headset is so uncomfortable I hardly ever use it. (If anyone wants to buy a nearly new S9 heatset let me know)
BTW It seems to be a known issue with BA + WM6 that headset disables all other BT connections. I would love to be able to use my GPS and headset together, but alas it disconnects the GPS everytime the headset is connected. Drop the headset and the GPS reconnects immediately.
One final note. All my testing has been done with the MS BT Stack. I read that Widcomm has no hands free support so I didn't try it.

Helmi's Broadcom Bluetooth Stack 1.7
I could never get the MS BT Stack to work right. Helmi made this test cab. It works well with my BA using WM6 and my Motorola S9 headset. The range is about 1 meter but the sound is good.
The BT manager format is accessed through the BT icon on the bottom toolbar.

I cannot upload the .cab file. Search for this file: HELMI_BA_WM5_BT1.7_TEST for great quality BT on BA WM6.

One way to solve the BTA2DP problem & it supports stereo. You can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right

thanks alot trying the teksoft one and so far it works fine ^^ maibe ill see if its possible to skin the buttons tho
@kasush That method doesnt work for my headset, the Jabra BT620 can be a real ***** even on my laptop at times.. so i really need to turn off the wireless stereo.. So gues the S9 isnt that bad apart from the fact its not so comfortable.. the BT620 is great.. when it works ^^ just turning off the bloody blue rings on the headset everytime is anoying *grins* people think ufo's landed when i ride around with those on.
(Lol, just noticed there is a firmware upgrade available for my BT620s :O.. lets see how that works out ^^)

Mogul Widcomm stack
Has anyone successfullly installed the widcomm stack on their mogul. My pioneer Avic D3 hates the Mogul's MS Bluetooth stack. Keep me posted hackers! I love this site btw. I'm it's *****.

Bluetooth not staying on - same problem as Tracy and Matt Blog

My Xperia X1 is great. The keyboard is a refreshing change from the orbit 2/polaris.
Problem - Bluetooth does not stay switched on. This is most apparent when using my Parrot carkit because it does not automatically connect due to the bluetooth being switched off. I have looked through the settings to no avail. Any suggestions? Anyone else with similar problem?
Also the screen switches itself off at such short intervals - possibly to help battery life but it makes reading web pages frustrating at times.

The screen switching off can be changed or turned off in the phone settings.

Thanks for that. The bluetooth issue is real although it may only be on the branded uk ROMs. Anyone else with a similar problem - when I click bluetooth on it stays but as soon as you open up settings or programs the icon disappears (switches itself off). Any bright ideas?

Bluetooth just turns off...
I have the same problem.
The Bluetooth just turns off.
Its a real problem, and nothing i can find either talks about it... or in any setting.
Anyone know of a fix?

My friend at SE Sweden told me that a new FW will fix this. They know about the problem and are working on it.

RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me

Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...

harvsingh said:
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...
Click to expand...
Click to collapse
Well, that's weird since it fixed the issue for me... still, nice to hear SE's working on improvements.

Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
Can you put what rom version yours is.?
Start /SEttings/device information/Version
and what SE asked from me...
Start /SEttings/device information/customer info
thanks

What works for me is switching off the wifi - my bluetooth has stayed on every since.

I installed the Touch HD TF3D and hey presto.. WIFI and Bluetooth work as wanted with no probs.
So... What does this package do?
any Bluetooth settings or power?

Hello,
i have a german rom ( 1.02.932.3 ) and i have the bluetooth issue too.
daniel

I think this is just a small bug in the SE BT stack. SE phones have an option to turn on BT for 10 minutes or so, maybe this setting was used in the first roms. I hope SE will fix this.

I've got a 02 SE X1 just out, I have the same issue, I can connect to my Parrot 3200and it works fine, get back in to my car sometime later and BT will not connect, 1st I tried switching off the phone, then resets, and finally which works, switching off the BT and back on again (although BT still shows as being on in Connection manager), after that I can finally get a BT connection to the car kit,
Is anyone getting the same problem ?? and is there a patch yet as its really frustrating to do this every other time,
Thanks Mark

Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.

the_flyer said:
Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.
Click to expand...
Click to collapse
Wifi is always off ? I've emailed SE tech support so it will be interesting to see what they say

Does anyone have a problem with the HBH-DS980 bluetooth headset?
On my X1, it only shows Wireless Headset and Hands-Free services. What about A2DP and AVRCP?

I never use wifi, but I still get this problem pretty regularly. It's the only thing keeping me from using the phone.
Also, has anyone else noticed a bug where the email signature you set will not be retained after a soft reset? It always reverts back to the stock Xperia sig.

I have a Xperia uk version and had the same experience, bt went off randomly. I installed Touch flo 3d and now works fine. Switching on and off WiFi has no influence on bt in my case. Also tried bt on + soft reset and still bt went off sometimes.

i have same problem
i have the same problem with the bluetooth, i cannot connect to my car kit (which is SE also by the way!). After contacting SE i was told to wait for the new firmware coming out on the site... this is so frustrating!! how can such an expensive phone have this silly problem??

Zombie BA

hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks

hi
any test?what do mean?

Zero|Cool said:
hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks
Click to expand...
Click to collapse
which ROM do you have?
Do you happen to have BigMike bluetooth running?

standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.

Try going through your power management under settings.
You might have tick a few things there.

I was getting this trouble too!
As Resident evil... on nights my device wakes up and begins screaming STARS!!!!
I just call Claire redfield and Alice and they burn on its head! PUMMM!
jajajaj
Well... check out your settings if you have a program runing under... and it needs conections via BT, Wi-fi or GPRS... your device gonna wakes up trying to get conection all the ways it can... if nothing is runing behind maybe was a bad flash... reflash it...
Hope all we can help you...
We are like a squadron supporting forces... Huh im playing too much Acecombat 5....

It could either be Bluetooth running and also it could be some appointment/message turning your device on. Also, do you have your device cradled? ActiveSync (if connected to PC) will turn your device on to sync.
Hope this helps

red_hanks said:
standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.
Click to expand...
Click to collapse
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks

Zero|Cool said:
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks
Click to expand...
Click to collapse
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.

motisu said:
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.
Click to expand...
Click to collapse
I read somewhere that if you installed another BT stack that eventually it would solve the problem? Is this true?

ok there is fix but i do not advice you to use it if you use BT handsfree - because with original driver BT turns off when device get in standby and this one keeps it working

you can install S2U2 and set:
Lock when device wakes up: ON
Power Off in: 5s (this is the minimum).
this is not a solution, but more like a workaround...this works for me well...