Zombie BA - MDA III, XDA III, PDA2k, 9090 ROM Development

hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks

hi
any test?what do mean?

Zero|Cool said:
hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks
Click to expand...
Click to collapse
which ROM do you have?
Do you happen to have BigMike bluetooth running?

standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.

Try going through your power management under settings.
You might have tick a few things there.

I was getting this trouble too!
As Resident evil... on nights my device wakes up and begins screaming STARS!!!!
I just call Claire redfield and Alice and they burn on its head! PUMMM!
jajajaj
Well... check out your settings if you have a program runing under... and it needs conections via BT, Wi-fi or GPRS... your device gonna wakes up trying to get conection all the ways it can... if nothing is runing behind maybe was a bad flash... reflash it...
Hope all we can help you...
We are like a squadron supporting forces... Huh im playing too much Acecombat 5....

It could either be Bluetooth running and also it could be some appointment/message turning your device on. Also, do you have your device cradled? ActiveSync (if connected to PC) will turn your device on to sync.
Hope this helps

red_hanks said:
standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.
Click to expand...
Click to collapse
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks

Zero|Cool said:
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks
Click to expand...
Click to collapse
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.

motisu said:
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.
Click to expand...
Click to collapse
I read somewhere that if you installed another BT stack that eventually it would solve the problem? Is this true?

ok there is fix but i do not advice you to use it if you use BT handsfree - because with original driver BT turns off when device get in standby and this one keeps it working

you can install S2U2 and set:
Lock when device wakes up: ON
Power Off in: 5s (this is the minimum).
this is not a solution, but more like a workaround...this works for me well...

Related

Bluetooth keeps turning itself on!

I have no idea why, but every 10 minutes or so BT turns itself on on my XDA2.
This is killing my battery folks! Any idea why it might be doing it?
TIA!
Are you running Pocket Bluetooth Tools? There is a *feature* in this program that can do this kind of thing. :x
I uninstalled it a few days after installing it because it was draining my battery, and frankly gave me little benefit for the trouble. The BT stack in the 1.72 (also 1.66?) ROM version gives a BT COM: port for use with BT GPS, and that was the major reason for this program.
Anyway, this is a possible source of your problems.
Thanks BRosenow - that did the trick!
Cheers!
0
Hello XDAlovers
I happen to have the same problem on my m1000, but ive never installed any Blootooth tools whatsoever.
Every now and then i see my blue bluetooth light blinking telling me bluetooth is on. When i check the settigs however its turned off! (??????)
Any ideas out there ?
Thanx
peace

Hitting the power button shuts Bluetooth Off

Hi
Does everyone have this issue of the BT turning off when you hit the power button?
I have the following conifguraiton
ROM 1.72 BB version
Bluetooth Tools
ya i have the same problem...
ratnamg said:
Hi
Does everyone have this issue of the BT turning off when you hit the power button?
I have the following conifguraiton
ROM 1.72 BB version
Bluetooth Tools
Click to expand...
Click to collapse
I wish I could get the Bluetooth to come ON on my PDA2K...
I have the latest Club iMate ROM AND Bluetooth Patch- and am unable to activate bluetooth at all.... every timie it warns of insuffecient driver memory and tells me to soft reset- and regardless of the number of times I soft-reset my device- It give me the same warning-
As for the 802.11 WiFi- it is slightly more stable- but quite often I have trouble getting it to power up as well..... "usually" a single soft-reset solves this issue- but sure is irritating-
I thought the new PDA2K in ALL its names/forms was going to be the answer to my not wanting to carry 3 devices with me... but I think soon I will be carrying a GOOD BLUETOOTH phone and a PPC [NON PHONE] to use with it again...
So far as I can tell, the PDA2K is 'functionaly' one of the WORST PPC's i've ever owned....
well its normal... if you push the off button the phone will go off.. even activesync disconnects because.. well... its off...

Modifying the flight mode facility

I currently use a QTEK s110 mainly for sat nav purposes. i dont use it as a phone at all. i am using tom tom5 with a globalsat bt-338 bluetooth reciever. with the bluetooth running it runs the pda battery down in about 2-3 hours if i forgot to lift the car charger from the other car. also it is a pin to start up as i have switch flight mode off and then wait fo rth phone to boot up before activating the tt software. so here are my questions.
is there anyway i can just get the tom tom to switch the flight mode off when i activate the tom tom software?
or is there anyway i can switch the pda off when not in flightmode rather than put it in standby as this just wastes the battery?
Can a shortcut button be created for the flight mode facility?
is there a fix for running the bluetooth with the flight mode on?
at present i have to switch off flight mode which becomes a pain when i have to switch it back on.
i have looked in to using the Globalsat sd-502 but it has compatibility issues.
i appreciate any help on this
Teb
"is there a fix for running the bluetooth with the flight mode on? "
tebs,
I know how you feel. This seems to be a problem with certain firmwares of the Qtec S110.
My manual states that holding down the power button turns the phone part off but not on my phone.
I'm currently testing Phone Alarm. It allows you to set up profiles. I've set one up which switches the radio (i.e. phone) off and bluetooth on. With it you don't have to go anywhere near flight mode. In fact, if you do, it'll get a bit confused. It's two presses on the today page to change modes. You can configure it to automatically put your phone pin in when switching the phone on. It's one press to toggle bluetooth on or off.
It takes some configuring but may do the job and its quite cheap (30 day trial)
Hi Borg,
i have also been using phone alarm for the last 3 weeks or so and its workin quite well. look as if i`ll have to purchase the software as my 30 day trial period is about to expire.
Yes, it's a pain that we have to buy software just to do what should be standard i.e. have bluetooth on without the phone on, but there you go. I contacted Qtek about this and they were pretty useless. Eventually I convinced them that it wasn't a faulty device but a faulty firmware and the only firmware that they offered me was the one I already had which is when I turned to PhoneAlarm.
Maybe one day HTC will put two physical switches on their devices to turn off phone and bluetooth - much better than software flight mode.
On a related note: I use sat nav whilst walking. I would like my bluetooth to actually turn off when I turn the device off so as to save PDA battery power. I'm sure the manual says it does turn off when you turn off the device but again it doesn't with my firmware - does yours?
borgs said:
Maybe one day HTC will put two physical switches on their devices to turn off phone and bluetooth - much better than software flight mode.
Click to expand...
Click to collapse
I've been saying that for ages! But honestly I dont even need physical buttons. If they would at least make the communications module togging (ie flight mode plus other radio functions) accessible from an on screen area bigger than a pinhead, that would be enough for a start. Its impossible to do it one handed. I'd love to know who the bonehead is at MS product development that okayed such awful ergonomics on a critical funciton...
Borg, my one is the same i cannot switch it off with the bluetooth running. need to switch it off first before switching the pda off otherwise the screen goes blank for a second then comes back up again!
skagen i totally agree with your comments.
its a pity the globalsat sd-502 doesnt work with it either that way you`d save loads of power not using the bluetooth at all. unfortunately once again the qtek has let us done on that one too as it doesnt detect the memory card!
Try
1. radiooff.exe
2. Turn on Blutooth
3. Tomtom -> GPS -> Configure -> Other NMEA GPS (4800,COM5 )
tebs said:
is there a fix for running the bluetooth with the flight mode on?
Click to expand...
Click to collapse
Try this:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Change "IsFMCheckEnable"=dword:00000001 to "IsFMCheckEnable"=dword:00000000
Works for me...
Bye
it doesnt exist on my registry
Re:
Krisu said:
Try
1. radiooff.exe
2. Turn on Blutooth
3. Tomtom -> GPS -> Configure -> Other NMEA GPS (4800,COM5 )
Click to expand...
Click to collapse
radiooff.exe sounds interesting but I couldn't find it on my pocketPC. I looked in the windows directory and then I did a find. Is it a third party product?
Please ignore, I wasn't logged in when I read that message and so it didn't show me the download. Thanks
moghisi101 said:
tebs said:
is there a fix for running the bluetooth with the flight mode on?
Click to expand...
Click to collapse
Try this:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Change "IsFMCheckEnable"=dword:00000001 to "IsFMCheckEnable"=dword:00000000
Works for me...
Bye
Click to expand...
Click to collapse
This also doesn't exist in my registry but the warningmsg part exists under OEM rather than HTC. But, if I add IsFMCheckEnable 0 it has no effect.
I think that this is probably a difference between the Qtek firmwares and the iMate firmwares. Qtek seem to have stuffed up in their current firmware.
Re:
Krisu said:
Try
1. radiooff.exe
2. Turn on Blutooth
3. Tomtom -> GPS -> Configure -> Other NMEA GPS (4800,COM5 )
Click to expand...
Click to collapse
Fantastic - thank you so much Krisu!
I have now uninstalled PhoneAlarm, done a soft reset and can now toggle the phone off and on using that app. If the bluetooth is currently running it leaves it running. No need to go near the flight mode button and should be able to assign it to one of the keys for fast turning off of the phone.
Thanks again!
borgs said:
moghisi101 said:
tebs said:
is there a fix for running the bluetooth with the flight mode on?
Click to expand...
Click to collapse
Try this:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\FlightMode]
"IsFMCheckEnable"=dword:00000000
"WarningMsg"="Please turn Flight Mode off first"
Change "IsFMCheckEnable"=dword:00000001 to "IsFMCheckEnable"=dword:00000000
Works for me...
Bye
Click to expand...
Click to collapse
This also doesn't exist in my registry but the warningmsg part exists under OEM rather than HTC. But, if I add IsFMCheckEnable 0 it has no effect.
I think that this is probably a difference between the Qtek firmwares and the iMate firmwares. Qtek seem to have stuffed up in their current firmware.
Click to expand...
Click to collapse
LOL, yea I forgot to mention that my Qtek is running on an Imate ROM. That may be why...
moghisii101: No probs mate, I appreciate the info - if anything its shown me that the iMate rom flight mode is better implemented than the Qtek version.
tebs: check this thread out: http://forum.xda-developers.com/viewtopic.php?t=39281
You will find a bluetooth cycle program there (CicleBT). It seems to work ok with radiooff.exe but can get a bit confused if you download (from there) and use FlightMode. So I would suggest that you use radiooff.exe and CicleBT. I've assigned them to buttons. Phone Profiler also seems to have problems with our dodgy firmware. Again this is not the program's fault but what Qtek have done with their firmare.
And cheers for your thread as you've helped me solve my problems!
Check out SKScheMa at www.s-k-tools.com as it can turn WiFi BT and GSM on and off from a scripting language or from its scheduler.
Cheers cjb
I use the bluesoleil BT stack,and I can use tomtom with the phone off!

Bluetooth not staying on - same problem as Tracy and Matt Blog

My Xperia X1 is great. The keyboard is a refreshing change from the orbit 2/polaris.
Problem - Bluetooth does not stay switched on. This is most apparent when using my Parrot carkit because it does not automatically connect due to the bluetooth being switched off. I have looked through the settings to no avail. Any suggestions? Anyone else with similar problem?
Also the screen switches itself off at such short intervals - possibly to help battery life but it makes reading web pages frustrating at times.
The screen switching off can be changed or turned off in the phone settings.
Thanks for that. The bluetooth issue is real although it may only be on the branded uk ROMs. Anyone else with a similar problem - when I click bluetooth on it stays but as soon as you open up settings or programs the icon disappears (switches itself off). Any bright ideas?
Bluetooth just turns off...
I have the same problem.
The Bluetooth just turns off.
Its a real problem, and nothing i can find either talks about it... or in any setting.
Anyone know of a fix?
My friend at SE Sweden told me that a new FW will fix this. They know about the problem and are working on it.
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...
harvsingh said:
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...
Click to expand...
Click to collapse
Well, that's weird since it fixed the issue for me... still, nice to hear SE's working on improvements.
Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
Can you put what rom version yours is.?
Start /SEttings/device information/Version
and what SE asked from me...
Start /SEttings/device information/customer info
thanks
What works for me is switching off the wifi - my bluetooth has stayed on every since.
I installed the Touch HD TF3D and hey presto.. WIFI and Bluetooth work as wanted with no probs.
So... What does this package do?
any Bluetooth settings or power?
Hello,
i have a german rom ( 1.02.932.3 ) and i have the bluetooth issue too.
daniel
I think this is just a small bug in the SE BT stack. SE phones have an option to turn on BT for 10 minutes or so, maybe this setting was used in the first roms. I hope SE will fix this.
I've got a 02 SE X1 just out, I have the same issue, I can connect to my Parrot 3200and it works fine, get back in to my car sometime later and BT will not connect, 1st I tried switching off the phone, then resets, and finally which works, switching off the BT and back on again (although BT still shows as being on in Connection manager), after that I can finally get a BT connection to the car kit,
Is anyone getting the same problem ?? and is there a patch yet as its really frustrating to do this every other time,
Thanks Mark
Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.
the_flyer said:
Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.
Click to expand...
Click to collapse
Wifi is always off ? I've emailed SE tech support so it will be interesting to see what they say
Does anyone have a problem with the HBH-DS980 bluetooth headset?
On my X1, it only shows Wireless Headset and Hands-Free services. What about A2DP and AVRCP?
I never use wifi, but I still get this problem pretty regularly. It's the only thing keeping me from using the phone.
Also, has anyone else noticed a bug where the email signature you set will not be retained after a soft reset? It always reverts back to the stock Xperia sig.
I have a Xperia uk version and had the same experience, bt went off randomly. I installed Touch flo 3d and now works fine. Switching on and off WiFi has no influence on bt in my case. Also tried bt on + soft reset and still bt went off sometimes.
i have same problem
i have the same problem with the bluetooth, i cannot connect to my car kit (which is SE also by the way!). After contacting SE i was told to wait for the new firmware coming out on the site... this is so frustrating!! how can such an expensive phone have this silly problem??

[Q] Cannot turn on bluetooth w/ HD2O's 1.23b ROM?

I flashed HD2O 1.23b1 ROM to my HD2. Almost everything is perfect (or at least has workaround) except bluetooth. I cannot turn it on. Actually when I turned it on, it will turn itself off automatically after few seconds.
Bluetooth is must-have feature for me coz I leverage it to use my phone in car. Can anybody with the same ROM has the similar issue? How to fix it? Any workaround?
After searching the forum I found a workaround for this.
Turn on Wi-Fi
Turn off Bluetooth
Reboot the phone
Now I can turn on Bluetooth.
However after while, I found its Bluetooth will turn off again automatically.
I don't have a chance to test the CAB mentioned in the following thread on this ROM yet. (Actually I cannot download it from office network.)
http://forum.xda-developers.com/showthread.php?t=1250869
Hopefully they could fix the issue.
Similar behaviour to me...
But I discovered that if I charge my HD2 (when I'm in the car) then the bluetooth is not turning off automatically any more...and I can use it.
abogdan said:
Similar behaviour to me...
But I discovered that if I charge my HD2 (when I'm in the car) then the bluetooth is not turning off automatically any more...and I can use it.
Click to expand...
Click to collapse
Really? How about Wi-Fi? Do you need to enable Wi-Fi to turn on Bluetooth?
If it works, at least we have a workaround before 1.23 final version released.
I just realized that I cannot send CAB to HD2O ROM. Pathetic~
larryexchange said:
Really? How about Wi-Fi? Do you need to enable Wi-Fi to turn on Bluetooth?
Click to expand...
Click to collapse
Yes, wi-fi should be ON in any case...if you want BT working.
abogdan said:
Yes, wi-fi should be ON in any case...if you want BT working.
Click to expand...
Click to collapse
I tested the solution. It works! Thanks you so much! At least we had a workaround. Hopefully HD2O could fix the bug in the next release.

Categories

Resources