Related
Hi,
I've recently purchased an xda 2 from O2 it came with a free bluetooth headset, but I've a few problems and wondered if anybody could answer a couple of questions.
1. The little blue flashed LED, is it meant to flash all the time that bluetooth is being used? It seems to start flashing and then just stop.
2. When I go into my bluetooth settings and turn it back on when it's switched itself off I don't get the LED flashing then I go back into the settings again and it says that it's off. Is this what it's meant to do?
Any good guides/tools about using bluetooth with this device?
Beginning to pull my hair out and I've not much to spare!
Cheers
Marc
Free? from O2? how?
1stly howd u manage 2 get sumit out of O2 for free? i would be worried about that allready!!
what bt Headset did u get? with mine, i get a blue light flashing intermitently when the headset is turned on, and it doesnt change when im making a call.
which bt settings are you talking about? obviously you need to have bonded with the device, which the headsets instructions should cover.
to turn bt on the phone on you click on the bt icon at the botom of the active screen and select the On radio button.
if headset profile is enabled then there should B a small blue headset symbol next to the bt symbol, if its not set, or not turned on then it will be gray. if it is gray then click on it and hopefully it will turn blue to activate the headset profile.
there are sum interesting bt tools around, but the "recomended" setup is the Pocket Bluetooth Tools for the O2 XDA II and the MDA II which is available from here:
http://bluetooth.i-networx.de/index_e.html
I hope that helps.
Smiley
sounds like you are using bluetooth tools and have got the clock symbol live (not greyed out), it times out the internet connection but doesnt seem to tell o2's software that it turned it off so when you go in, it quite often seems to think its on when its actually off !!
Hi, I didn't have the bluetooth tools loaded, but I've downloaded them from the site you suggested and everything seems to work better.
The headset did indeed come free from O2 I was quite surprised too.
I've think I've attached an image of it, not sure what make it is does BlueTrek sound good?
Yeah that sounds about right, their website doesnt actually give any details, helpfull as allways!! :roll:
neway, have u got everything working properly now?
Smiley
Hmm...somebody had the same problem with his Bluetreks G2 and the XDA2.
He did a special pairing mode and it solved the problem.
I think its in the G2s instruction manual.
Had a look at the manual can't see anything special in the way that you pair the G2 to the XDA2.
Do you use this bluetooth toolkit?
It still seems flaky, I tried answering a couple of calls with the headset yesterday and nobody could here me at the other end of the phone. Sometimes I get it where the phone says that I have "no bluetooth available" I have to remove the battery and insert it again. Is this normal?
Regards
Marc
Marc,
I get the same symptoms you describe when I'm using ActiveSync with my XDA2 over bluetooth, but never with my HBH-65 BT headset. I'm not using any additional bluetooth tools or anything like that. Just the standard built-in bluetooth on my original (November 03) ROM.
Sometimes if my bluetooth ActiveSync connection is idle for a while the connection drops and the flashing blue light on the XDA2 goes out. However, if I tap the little blue BT icon at the bottom of the Today screen, the setting shows that BT is still turned on. I have to tap it on, then off then on again to cycle the status and convince the machine that bluetooth is really back on again. :? This sounds like the problem you describe.
However, no problems like this with my BT headset, which works perfectly.
This isn't any help, but at least you know you're not alone!
Does anybody know if a registry entry exists to turn the bt headset profile on and off?
I've got headset working now but it switches off frequently.
Cheers
Marc
I have a BlueTrek G2 for my Imate and it's working with no problems at all ... I tried BT tools but didn't find it useful as I thought it will give me a "Hands free" profile but it doesn't :x
mokl: maybe it's a ROM issue ... mine is 1.72 WWE, what's yours ?
The rom version is 1.60.00WWE
Just to let everybody know, I had some major problems with my bluetooth on my XDA 2. Tried everything, eventually got a replacement from 02 and the new one works fine now, so it must have been a hardware fault.
Guys
Since the upgrade, everything has been working great, with the one exception that the bluetooth pairing with my BT car kit (Parrot CK3300) keeps dissapearing from the XDA.
It works for a few days (using TomTom 5) then it suddenly dissapears, and I have to set it all up again.
Any ideas?
Ta
they is quite a few of us in the same boat, i have tried a few things but am stump now just waiting for parrot to release a new firmware for the ck3300
Thanks
Paul
Try to upgrade Radio to 1.11 , it's responsible for BT too.
Has anyone any experience of this while using Radio 1.11?
This all worked fine until after the ROM upgrade, so is it likely that the Parrot will need an upgrade?
It works ok for a few days then the XDA suddenly bleeps when it tries to connect with the car kit, then there is a dialog box on the XDA screen asking for the passcode to pair up..., I've put the password in (1234), but it always fails... then thats it ... pairing lost
Any clues anyone... this is really starting to frustrate me :x
Ta
1.11 fixes it, but...
When I upgraded from the stock O2 ROM to the T-Mobile one, I found that when ever I switched off my GPS unit, I needed to re-pair it for it to work again. Upgrading to the 1.11 Radio Rom did fix this. Never had a problem with headsets.
But I've also been having some weird power problems - battery going down by 10%+ an hour. Mostly it turned out to be on days when I used wifi in the morning - I'm pretty sure using the new radio dialogue didn't actually switch off the wifi radio when you disconnected. 1.11 does fix that. But also sometimes switching off the phone didn't actually switch off that radio, and power would dissipate way too fast with nothing supposedly on. Doing a soft reset always allowed me to leave it over night and only see 1-2% power gone.
So I've just backed down to the original radio ROM from the original O2 installer. I'm hoping this will solve all my problems, at the cost of the less resilient changeovers from UMTS to GSM.
Ta,
Mark.
i think i have cracked this, my phone has now been connected to my ck3300 for 5 days solid now
here is the post on the parrot forum
http://www.parrot.biz/forums/english/viewtopic.php?id=813&p=4
its at the bottom
Paul
i think i have it pegged have another look at the parrot forum
ok here is yet another update on things.... this is a very strange one. if you enable the device lock start\settings\personal\lock
Prompt if device is unused for 16.7 hours
set simple pin
the phone and the parrot device keep there pairing with no problem at all i have been testing it for the last 48 hours
if you disable the above it loses the paring straght the way.
strange is they anyone else who can try this
Thanks
Paul
I'm using a Parrot R N B, but I have experience the same problem. I have also upgrade to the new radio version, and again the same problem. In fact I can't reproduce the error in a controlled way. It happens from time to time. But more of the time, the Universal connect again to the parrot only assigning again the Parrot as the headset in the Bluetooth manager.
My try now was to install the buzznet.dev cab attached. I'm trying also what buzz said: Do not use the power button to put the Universal off, only close the lid.
I'have 2 days without problems with the parrot. I'll post an update if this also fail.
what parrot do you have? i have a ck3300 running version 1.14d if you can try the above trick and let me know... i could reproduce the error ever time, just connect up 3-4 times and then it would fail..... have not had to worry about the power button trick.
Paul
Mine is RHYTHM N'BLUE, and with this last trick I told you, I add a new day without problems. Today I have started and stopped the Parrot 6 times and always work perfectly.
Hi,
Can't find anything in any other threads so here goes..
My M3100 (TYTN) turns bluetooth off when I turn off my Sony HBH 300 BT earpiece.
It doesn't happen everytime, maybe 50% of the time. It wouldn't be a problem but during the working day I connect and disconnect maybe 10 to 20 times and when I get back on the road and fire up the earpiece I suddenly find no BT.
I'm normally not in a place where I can safely stop to go through the connections screen to re activate it....
Not had this problem with any other phone, Nokia, SE etc...
I think it also happend once or twice after turning off my TomTom One whilst running the traffic BT connection to my phone...
It is getting to be a pain, so much so I'm considering using a OLD Nokia instead of the M3100. Only advantage is the M3100 allows more than one BT connection at the same time although you do have to connect the BT earpiece before connecting to the TT One unit...
Any ideas how I can stop it turning off without ME actually turning it off, never happens anyway, I just leave it on...
HELP !!
Phil-w
I have a similar problem and would love to find an answer before my 30 day return period is up! I haven't been able to find out WHY my BT radio always shuts off, but about half of the time I get in my car the BT is off. This - and the MS Voice Command hack not working with my particular HF - is going to make me return this thing.
BTW, I have Cingular 8500 with stock WM5.
Worked for me
Hey guys. I had a similar problem a while back.
I had installed a comm manager, and my BT was randomly shutting off. After getting some responses, I uninstalled the updated comm manager, everything has been working fine ever since.
I would recommend following the same course of action. If you don't have the original installed, maybe try installing a new one.
I recommend keeping the phone. It's great. There is SOOOO much you can do with it. If you are unlucky and got a lemon, that's a different story.
But I do not think this problem is common... good luck.
Last week I updated my ROM to the latest official AT&T release, and my BT problems *appear* to be solved.
My Xperia X1 is great. The keyboard is a refreshing change from the orbit 2/polaris.
Problem - Bluetooth does not stay switched on. This is most apparent when using my Parrot carkit because it does not automatically connect due to the bluetooth being switched off. I have looked through the settings to no avail. Any suggestions? Anyone else with similar problem?
Also the screen switches itself off at such short intervals - possibly to help battery life but it makes reading web pages frustrating at times.
The screen switching off can be changed or turned off in the phone settings.
Thanks for that. The bluetooth issue is real although it may only be on the branded uk ROMs. Anyone else with a similar problem - when I click bluetooth on it stays but as soon as you open up settings or programs the icon disappears (switches itself off). Any bright ideas?
Bluetooth just turns off...
I have the same problem.
The Bluetooth just turns off.
Its a real problem, and nothing i can find either talks about it... or in any setting.
Anyone know of a fix?
My friend at SE Sweden told me that a new FW will fix this. They know about the problem and are working on it.
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...
harvsingh said:
RTFM....
This does not fix the issue. Soft reset after enabling.
Again... I contacted SE... and was told.. "We are aware of this and it has been passed to developers to create a patch in the form of a CAB/flash that will become available on the SE website under support."
So... timescales... she said.. it won't be weeks as this is a new phone and any issues are taking priority.
Sit and wait... if you need it and use BT constant... Hold fire on buying one...
Click to expand...
Click to collapse
Well, that's weird since it fixed the issue for me... still, nice to hear SE's working on improvements.
Golgo said:
RTFM - switch bluetooth on + soft reset device = bluetooth stays on.
Works for me
Click to expand...
Click to collapse
Can you put what rom version yours is.?
Start /SEttings/device information/Version
and what SE asked from me...
Start /SEttings/device information/customer info
thanks
What works for me is switching off the wifi - my bluetooth has stayed on every since.
I installed the Touch HD TF3D and hey presto.. WIFI and Bluetooth work as wanted with no probs.
So... What does this package do?
any Bluetooth settings or power?
Hello,
i have a german rom ( 1.02.932.3 ) and i have the bluetooth issue too.
daniel
I think this is just a small bug in the SE BT stack. SE phones have an option to turn on BT for 10 minutes or so, maybe this setting was used in the first roms. I hope SE will fix this.
I've got a 02 SE X1 just out, I have the same issue, I can connect to my Parrot 3200and it works fine, get back in to my car sometime later and BT will not connect, 1st I tried switching off the phone, then resets, and finally which works, switching off the BT and back on again (although BT still shows as being on in Connection manager), after that I can finally get a BT connection to the car kit,
Is anyone getting the same problem ?? and is there a patch yet as its really frustrating to do this every other time,
Thanks Mark
Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.
the_flyer said:
Hi Mark I have a Parrot Bluetooth carkit (3200 the same as you). It is working and syncing beautifully with the X1i just as it did with my previous WM devices.
I dont go through the stages you mentioned anymore but bluetooth only stays on if the wifi is kept off.
Hope you get yours sorted.
Click to expand...
Click to collapse
Wifi is always off ? I've emailed SE tech support so it will be interesting to see what they say
Does anyone have a problem with the HBH-DS980 bluetooth headset?
On my X1, it only shows Wireless Headset and Hands-Free services. What about A2DP and AVRCP?
I never use wifi, but I still get this problem pretty regularly. It's the only thing keeping me from using the phone.
Also, has anyone else noticed a bug where the email signature you set will not be retained after a soft reset? It always reverts back to the stock Xperia sig.
I have a Xperia uk version and had the same experience, bt went off randomly. I installed Touch flo 3d and now works fine. Switching on and off WiFi has no influence on bt in my case. Also tried bt on + soft reset and still bt went off sometimes.
i have same problem
i have the same problem with the bluetooth, i cannot connect to my car kit (which is SE also by the way!). After contacting SE i was told to wait for the new firmware coming out on the site... this is so frustrating!! how can such an expensive phone have this silly problem??
hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks
hi
any test?what do mean?
Zero|Cool said:
hello every 1. I have a BA running windows mob 6.1 pro and everything is working fine except t e fact that when i put the device on standby, it is always turning itself on again. does this happen to anyone? thanks
Click to expand...
Click to collapse
which ROM do you have?
Do you happen to have BigMike bluetooth running?
standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.
Try going through your power management under settings.
You might have tick a few things there.
I was getting this trouble too!
As Resident evil... on nights my device wakes up and begins screaming STARS!!!!
I just call Claire redfield and Alice and they burn on its head! PUMMM!
jajajaj
Well... check out your settings if you have a program runing under... and it needs conections via BT, Wi-fi or GPRS... your device gonna wakes up trying to get conection all the ways it can... if nothing is runing behind maybe was a bad flash... reflash it...
Hope all we can help you...
We are like a squadron supporting forces... Huh im playing too much Acecombat 5....
It could either be Bluetooth running and also it could be some appointment/message turning your device on. Also, do you have your device cradled? ActiveSync (if connected to PC) will turn your device on to sync.
Hope this helps
red_hanks said:
standy..you mean you press the power button and the screen goes off, right? And then it turns on by itself? Did you check if your bluetooth is on? Because I experienced this too before, if I left the bluetooth on and I turn off (stand by) the BA after a while it will turn on itself. Hope this helps. Cheers.
Click to expand...
Click to collapse
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks
Zero|Cool said:
It's exaclty that. I read somewhere it has something to do with the bluetooth stack, I turned off BT and it stopped lol However I need BT always on as I use an external sirf star 3 gps and I pair up the mobile phone with my car. Can anyone tell me how to fix this? Tks
Click to expand...
Click to collapse
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.
motisu said:
There is no fix. Since WM5, the BT driver requires that it be turned on periodically or else it turns itself off. All ROM cookers (AFAIK) use the big mike fix driver to keep the BT alive.
Click to expand...
Click to collapse
I read somewhere that if you installed another BT stack that eventually it would solve the problem? Is this true?
ok there is fix but i do not advice you to use it if you use BT handsfree - because with original driver BT turns off when device get in standby and this one keeps it working
you can install S2U2 and set:
Lock when device wakes up: ON
Power Off in: 5s (this is the minimum).
this is not a solution, but more like a workaround...this works for me well...