A2DP is not working well.. when i use ad2p headset the audio fails VERY Much. If i turn off A2DP wmp plays well the music.
Is there any patch?
Thank's!
Fix!
I found this patch! It's not 100% good (sound fails ONLY time to time and drains battery ), but is almost, i think that with some work could get there...
lets make it 100% good...
http://forum.xda-developers.com/showthread.php?t=284974
this patch is not really working for me :/ i tried tons of patches but no go as of yet...
Is WM6 and ad2p no go? does it work better under WM5? or some issues? >.>
Or am i doing something wrong? Has anybody succesfully fixed thier ad2p under WM6?
if yes, what rom, what fixes? maibe radio rom? etc..
Thanks in advance
btw; tried Xplode's rom and now using Helmi's..
radiorom 1.13.. (not sure if that has anything to do with bluetooth >.>)
Xplode's i actualy ran perfectly once.. but never managed to recreate that after repairing my bt620s
thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>
Twistit said:
thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>
Click to expand...
Click to collapse
Use a registry editor and add the following to your BA registry:
HKLM/Software/Microsoft/Bluetooth/Devices
Add a new DWord: DefaultMTU with the Hex value of 2a0
Capitalization counts in te DWord.
BTW, I posted this 2 days ago in this same forum under the "muppet" thread. Search is your friend.
Thanks ^^ ill try it when i get home.. forgot my bt620s today >.>
Geh i did search ^^ but i never figured the Muppets would have anything to do with ad2p *grins* So many random topics in this forum it feels like searching for a needle in a haystack
No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^
Twistit said:
No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^
Click to expand...
Click to collapse
check this page:
http://translate.google.com/transla...arch?q=KB831722&hl=en&rls=com.microsoft:en-us
for some reason this KB article is only in Japanese but google translates it well. This is where I got my information and I can tell you I never have the difficulties yoiu are describing. Try the following steps and let me know if it working:
1. Connect the headset
2. open the media player of choice
3. start playback
4. pause playback
5. wait a couple seconds
6. resume playback
at this point it should play without any pauses/skips (works fine for me, but my BT range blows so bad, and my S9 headset is so uncomfortable I hardly ever use it. (If anyone wants to buy a nearly new S9 heatset let me know)
BTW It seems to be a known issue with BA + WM6 that headset disables all other BT connections. I would love to be able to use my GPS and headset together, but alas it disconnects the GPS everytime the headset is connected. Drop the headset and the GPS reconnects immediately.
One final note. All my testing has been done with the MS BT Stack. I read that Widcomm has no hands free support so I didn't try it.
Helmi's Broadcom Bluetooth Stack 1.7
I could never get the MS BT Stack to work right. Helmi made this test cab. It works well with my BA using WM6 and my Motorola S9 headset. The range is about 1 meter but the sound is good.
The BT manager format is accessed through the BT icon on the bottom toolbar.
I cannot upload the .cab file. Search for this file: HELMI_BA_WM5_BT1.7_TEST for great quality BT on BA WM6.
One way to solve the BTA2DP problem & it supports stereo. You can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
thanks alot trying the teksoft one and so far it works fine ^^ maibe ill see if its possible to skin the buttons tho
@kasush That method doesnt work for my headset, the Jabra BT620 can be a real ***** even on my laptop at times.. so i really need to turn off the wireless stereo.. So gues the S9 isnt that bad apart from the fact its not so comfortable.. the BT620 is great.. when it works ^^ just turning off the bloody blue rings on the headset everytime is anoying *grins* people think ufo's landed when i ride around with those on.
(Lol, just noticed there is a firmware upgrade available for my BT620s :O.. lets see how that works out ^^)
Mogul Widcomm stack
Has anyone successfullly installed the widcomm stack on their mogul. My pioneer Avic D3 hates the Mogul's MS Bluetooth stack. Keep me posted hackers! I love this site btw. I'm it's *****.
Related
Can anybody fix the resume-music-problem?
I'm using a XDA neo (s200) and a Logitech HS200 bluetooth headset.
It's always the same problem: When I am listening to music and a phone call comes in, everything is fine. But when the call ends it's getting worse. Either the music resumes playing on my neo, or just nothing happens.
I recognised that a lot of A2DP-user have the same problem!!
So I hope it's just a dll/reg-problem which can be solved.
I already started to find some workarounds. But nothing helps.
After the call, I can press nearly every button on the headset, but nothing helps. When I manually enter the WM-Player and push the play-button again, the music seems to resume, but there is no sound, or the music comes out of my pda. It's strange: I can use the control-buttons on my headphone, but there is no music at all.
When I want the music back on my headphone, the only way is soft-resetting my neo. This is very annoying and takes a lot of time.
This my configuration:
XDA neo (s200) /O2-Verison, but it's nearly "O2-cab-free"
Logitech HS200
Windows Media Player 10
Mort-Player
I've installed A2DP in two different ways:
- automatic (via A2DP_hack.cab) and also
- the manual way
==> No difference
Everything else is working fine. No sound quality/hissing-problem. As long as nobody calls me, all buttons are woking fine.
I would be very glad, if some of you guys could fix this problem! I mean, it's awesome, that you could bulit up this a2dp-stuff! But at the moment, this a2dp-solution is just the half way. We need a way-back to resume our music!!
So PLEASE ROCK ON!
help!
I'm getting crazy because of this resume-problem.
For your interest:
I told you, that after a call, the music resumes on my pda, or it just stop.
Now I found out something: After a call the music just starts when I'm still in the WM-Player.
When I leaved the player before a call comes in (music is still running) the music won't resume on my pda. Just nothing will happen, until I work on the pda.
Hope this could be useful for you.
I don't think, that my headphone is the problem. When there is no call, I can always switch the music from pda to headphone and the other way by pressing the backward- and forward-button button on my headphone at the same time.
When I do this button-trick after a call I can still switch music from headphone (without sound) to pda. When I want the music back from pda to headphone it seems to work, cause I can use every button to control WM-Player, but there is no music.
What can I do???
Please help me.... I'm so sad.
I have the same problem!
Now I have to use my A2DP stereo headset like a simple wireless stereo hadphones 8(
My hardware:
Qtek S200
WM5, ExtROM 2.9.7 with "Smartmobile.se Enable A2DP" path
Sony Ericsson HBH-DS970 stereo headset
yeehaaaa
it finally works! i love you guys!
How did u fix it?
the way it works!
sealtael said:
How did u fix it?
Click to expand...
Click to collapse
simple & easy: just search your wireless lan cable and connect it to your xda. after that you have to take a bucket full of energy (I think half full would be enough) and jump around your xda while it's fighting with your activesync!
no, just kidding.
just have a look into this thread:
http://forum.xda-developers.com/showthread.php?t=284344&page=3
there you will find a download. (page 3)
please keep in mind, that this seems to be quite experimental! it's working with AKU 3.3 A2DP! The author of it recommends to delete the old a2dp-stuff before installing the new cabs.
Due to the fact that I made a complete new installation of my Xda NEO, I could directly install the AKU 3.3 cabs.
And what can I say? Everything works just fine! No more stupid reset after call!
Have fun!
poiuz said:
.....
....
just have a look into this thread:
http://forum.xda-developers.com/showthread.php?t=284344&page=3
there you will find a download. (page 3)
please keep in mind, that this seems to be quite experimental! it's working with AKU 3.3 A2DP! The author of it recommends to delete the old a2dp-stuff before installing the new cabs.
Due to the fact that I made a complete new installation of my Xda NEO, I could directly install the AKU 3.3 cabs.
And what can I say? Everything works just fine! No more stupid reset after call!
Have fun!
Click to expand...
Click to collapse
Thanks for ponting out the correct direction. I got that file and installed on my G4 XDA Neo (QTEK AKU2.2 original ROM). It worked perfectly. Always automatically swtich between stereo and hand free mode.
Hi!
In the last some days i read a lot and found the following :
1. download the widcomm stack from axim site : LINK
2. install it + do a soft reset
3. get a registry edittor (Resco, CECMD etc.)
4. change these values :
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Device=COM
FlowControl=0
Parity=0
Port=1 (This is the most important thing!)
-soft reset
-at the today screen you will find a BT icon, click on it and have fun
TESTED FEATURES
-BT FTP, tested with : SE K750i, hx4700.
-ActiveSync : NOT WORKING
KNOWN ISSUES
-unable to control from comm manager
-blue led not flashing, easy to forget
-a2dp not tested
-tested on aku3.2 and aku2.3 roms, others maybe ok.
-other devices can't download bt services list, but the services works well.
-maybe unable to remove, not tested yet
-turns off, when you trun off your device, that maybe a problem with BT headset.
DO IT ON YOUR OWN RISK
Great news! Posted an announcement to the SP & Pocket PC Mag Expert Blog too!
Problems!!!
I've just installed the bluetoth stack in my phone. I've not yet tested it but i've found two showstop problems:
- activesync doesn't work anymore
- i cannot start the comm manager anymore (when i press the comm manager button in the upper left corner i can see only a small dialog with wifi and bluetooth power levels)
This is what i've done (maybe i did something wrong):
- copied the cab to storage and ran it (installed in device)
- soft-reset (required by the installer)
- edited the registry according to the first post
- soft-reset
I'm using an aku3.2 rom
-----EDIT--------------
Comm manager is working again. I had to reassociate it in Start-Settings-Buttons
Still no activesync (over USB at least)
bye
bye
Has anyone else tried this then? Has anyone tried the hermes cab install found in here...
http://forum.xda-developers.com/showthread.php?p=1072292#post1072292
There has been reports that it works on the trinity as well, so it may work on the Wizard.
Edit: No it doesn't. I have just ried it and it gives the memory error.
took the plunge and tried it
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
new2city said:
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
Click to expand...
Click to collapse
Did you try tweaking the BT params (for example, lowering the bit speed) to see whether it would work at lower bit speeds? See my related articles.
got look out for the links to your tips and tricks again
Hi Menneisyys,
Surrendered on Widcomm stack almost 2 months ago, now have to look again for the links for your tips and tricks for the Widcomm stack again...
Any idea on how to restore audio to my speakers... still dead at the moment... sigh... don't want to restore my back up yet...
i found that you don't really need to remove the shift* keys. if you already removed it, download the BTSpeedSwitcher from the download link, and set the speed to 921600bps. that may help.
Got it working fine
Thanks, but now I am a bit unclear, but will clear things up later. I used the speedswitcher as you suggested and but I had to disable audiogateway before it could work... now I am stuck as I put my wizard into standby and now it won't come back.... on... doh!
Well, one thing I can confirm, you can put it into standby and the bluetooth is still on.......
will feed back more when I get a clearer picture of what happened.... The sound quality is great..... just skipped for a second but is not back to normal again...
My wizard has now a nice quality A2DP sound without the high pitch noise...
went to http://forum.xda-developers.com/showthread.php?p=1073003&posted=1#post1073003
and used the files from Superdave... all is well now... look at my reply at the hermes thread.. Now I will just back up this "working configuration" and retry these settings on the cab from Aximsite... All the same, thanks to the legendary Mikelspikel
Just wanted A2DP to work so bad.... and it does now. nicely..
new2city said:
Got it working
Click to expand...
Click to collapse
Okay, when you get time can you stick up how you got it all working? Many Thanks!
Ive installed the Superdave BBS_HERMES_03.CAB file and then modified the registry to use the above settings but every time i do the soft reset, the registry settings go back to the original values. Im stuck here.
Oh and i am using the last T-Mobile UK rom. (2.0 i think)
Edit 2: Now got it working. I had to kill voicecmd and cprog for it to load without giving the memory issue!
new2city said:
you can put it into standby and the bluetooth is still on.......
Click to expand...
Click to collapse
as it should - BT is on on PPC PE devices in standby mode, unlike on plain PPC's.
peetking said:
-unable to control from comm manager
Click to expand...
Click to collapse
It looks like comm manager is just an HTML document in the /windows directory. (Should be simple to redirect the button)
Leaskovski
sorry for the late reply but had a few setbacks during the night(I am in Malaysia)..
Got A2DP running all night and by mid morning... suddenly all went to hell..
1) No skipping with your suggestion of using MikelSpikel's speed switcher.
2) While trying to put it to standby to test if BT still works and it hung at first attempt. Something must have happened here as I recovered using the reset button and then suddenly I could get it to revert back to built in speakers and headset without issue. I thought, cool, it is like complete solution...
And then, I decided to backup this "complete solution" with SPB backup.. and after the softreset, I lost the ability to switch between headset and speakers. Then during the night while I sleep and use the headset, at around 3 am... the skipping came back...
and then... I restored the backup and now... got to tackle the skipping again.. never mind the muted speakers..
What linespeed(I use 320 dec), Blocks(16) and subband(8) do you use? I followed MikelSpikel's settings which work ok... last night...
back to the drawing board..
Right, i installed the superdave 03 version and then opened up the registry to make sure the settings matched the ones above. I had to kill cprog and voicecmd to start it without the memory error.
I have tested it now and although it is loading up ok, my headset connection is just not working properly. Its paired ok but nothing is getting routed through. However, my gps bluetooth device paired okay and is working fine with iGO 2006 after doing a detection. Damn shame about this headset! I am using a parrott ck3000.
redo..
Re-installed everything again and now I got a working version, some things to note though on my wizard..
1) I must overclock to 260mhz(battery status method) before I get skip free music.
2) Leaskovski, I had the same problem too in the beginning, where there is no audio getting through. Did you go to Bluetooth Manager and check the status of your headset? i went to mine(ItechS35) and I can see that the Wizard is sending data through successfully but there is no sound coming out of the headset. I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Now hoping to find a way to redirect audio back to speakers when bluetooth is not used..
not tonight though.. its 10.46 pm now where I am...
This doesn't look promising for how i though the BT audio might work with this stack. I was hoping for something like the following...
"A good example of this is MS Voise command running on the MS BT stack. The two devices are paired and connected, however there is currently no streaming. You then receive the text message and MS Voice command reads the message back to you. Just before the message is read, the connection between the devices is made live, and thus the message gets read over the BT headset."
I was hoping that this was going to work for all applications like media player and iGO. I can reproduce what it is doing at the moment using the BTAudio programme that is available on these boards. I just wanted to get around this 'constant' streaming of silent noise.
Damn shame.
Okay for anyone wanting to play with this, here is how i installed and got it running...
1) Download from this thread post http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 the file BBS_HERMES_03.zip.
2) Install onto your wizard and soft reset when asked. Upon the reset, the device will moan at you about not having enought memory to load the drivers. Click ok to close this.
3) Load up your registry editor (i use FDCSoft Task Manager) and make the following mods as stated in the first post...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Port=1 (This is the most important thing!)
If you only want audio routed to headset when there is audio to route then make this reg edit...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugins\handsfree]
Audiohandling=21
4) Do not do a soft reset yet.
5) Now fire up your Task Manager (i use FDCSoft Task Manager) and kill any memory hungry tasks. The ones i kill which then allow me to start the stack is voicecmd.exe and cprog.exe.
6) Now click on the BT icon in the system tray and turn BT on.
Obviously there must be some memory leaks some where in the wizard because a couple of people have said that later in the day, if you try to turn BT on again it wont start due to memory requirements. Anyway, the best thing i can think of is to leave BT on after you have turned it on.
Currently, the blue led will not flash when BT is one. Try not to use the Normal Comms Manager to turn BT one as well as i think this trys to turn the MS stack on which won't work (probably due to memory requirements! )
new2city said:
I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Click to expand...
Click to collapse
I didnt get this to work in the end by the way.
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
new2city said:
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
Click to expand...
Click to collapse
Hmm, i dont have those issues. I am using it with my carkit, so when i turn the engine off and remove the keys, the kit turns off. I haven't had to reset the device apart from when i have turned BT off and then tried to turn it back on again at a later stage (then giving me the memory issue).
I'm having troubles getting my car stereo to work with my wizard. When I get an incomming call, most of the time it doesn't let the stereo know. It also seems to only send the bluetooth signal for a couple seconds, then off for a couple seconds. My rom doesn't have A2DP, do I need this or what's the deal. TIA
Try this file. I got it from this forum. I don't know what it does but it works for me. I have a Motorola BT car kit and i was having the same problem. Take off the .txt, put in \Windows\StartUp and soft reset.
On startup it just opens the text file in word. Is it supposed to do that?
GreggSymington said:
Try this file. I got it from this forum. I don't know what it does but it works for me. I have a Motorola BT car kit and i was having the same problem. Take off the .txt, put in \Windows\StartUp and soft reset.
Click to expand...
Click to collapse
On startup it just opens the text file in word. Is it supposed to do that?
Click to expand...
Click to collapse
that is why you take off the .txt part so it should be just exe at the end!!! Just read what was said!!! duh
Ok, so it did that but it didn't seem to fix it. I'm using molski's 2.26.10.2 rom. Anyone have any other ideas/ thanks
What stereo are you using? I just installed a Sony MEX-BT5000 in my car last weekend, and it works fine (at least in handsfree mode -- haven't tested A2DP yet) with my Wizard with the Qtek 2.17.7.2 ROM and the Tornado A2DP fix.
I have a pyle deck. The wierdest thing is that it sees the phone sometimes and not others. And the phone sees the deck as handsfree but won't use it.
Anyone know ???
So i was playing around with this supid thing today trying to get it work and i figured out that it will work...but every time i have to press "turn handsfree on". But my stereo still doesn't reconize when it's ringing. So i guess the problem is that my wizard won't remember to leave the handsfree on, is there an always on anywhere? Please help me
look around in the xizzard upgrading part of the forum..somewhere on the first 3 pages of threads theres one labeled somthing like " how to keep Bluetooth, GPRS, WiFi enabled while in standby" see what that has to say about it because it sounds to me like what i was going trough with one of my BT headsets when my 8125 would go into the standby mode
Tried that, it didn't fix anything
When I use the A2DP in wm5/6 I tray all versions BT stack~but no one could work,so I chose 2003se,IT's best for BT A2DP.
Why Helmi Do not fix that?Dose this really hard?
Yes, it's that hard to fix that. The only way we could get wm5/wm6 working flawless on BA is if we had the source code for the drivers and the testing/debug equipment.
If you know someone that works at HTC you could ask them to look for the BA devkit and sourcecodes on the storage rom... hehehe
Mine didn't skip with WM5 and did not skip when I first flashed WM6. Now it does. When I was messing around trying to connect to bluetooth devices (I couldn't connect properly), it stopped skipping for a while. I don't know if this gives any clues.
rambo6 said:
Mine didn't skip with WM5 and did not skip when I first flashed WM6. Now it does. When I was messing around trying to connect to bluetooth devices (I couldn't connect properly), it stopped skipping for a while. I don't know if this gives any clues.
Click to expand...
Click to collapse
I know a way to prevented this bug,but not prefectly.
Use regedit tool,open to find software\widcom\plugin\av
add 3 dwords
Linespeed 320 (10+)
Blocks 16 or 32
Subbands 16
You will see the music quality is prefect
but the skipping frequency is above normal~
When using the asus p535,this way will surly improve the quality~and it no skipping,so I thing it must be the bug from the System~
Use win2003 have no such foolish bug.Now I set my pc back up my pda every time connected it with PC~Store the phone book in simcard~
I have no choice
Toxi,
Thanks. I couldn't add the Dword settings which you suggested because I had no Widcom file. So I loaded Helmi's 1.7 Broadcom BT driver. (Always wanted to try it. The Broadcom BT drivers alway better. Immediately after installing, my BA played music better alone and with my BT headsets. Adding the Hemi 1.7 BT cab, added the Widcom file which allowed me to add the Dword registry changes. The music sounds almost perfect.
I tested the BA with these three BT Stereo Headsets: Motorola S9 headsets; Chinese Copy Motorola BT820; and I-Phono RX450. The Motorola S9 works (It didn't at all with the MS WM6 BT Drivers). The S9 would only work if it's 12 to 18" from the BA. That's unacceptable. The BT820 chinese knockoffs skipped as usual (the skip some with every device cause they're knockoffs). The I-Phono worked perfectly with crisp clear sound and no skipping. I can also get further away from the BA but certainly not more than 3 feet without trouble.
In conclusion: Helmis Broadcom 1.7 cab worked to fix the sound problems completely with and without using the headsets. The newer headsets such as the S9 don't work all that well with the BA.
I hope this is helpful for others not satisfied with the music quality of the BA running WM6.
I wish HTC would make a Blue Angle II.
I just recently acquired a stereo bluetooth headset from dell model number BH200 and so far the stereo music quality is superb, but the moment a call comes in or I pick up a call it immediately disconnects itself. My question would be if any of you guys have any experience with this issue. the Stereo bluetooth and handsfree profile are both set to active. Any suggestions or hints?
I'm going to go on a limb here and assume that you guys haven't had access to the aforementioned bluetooth and i'm short out of luck here... right?
p.s. SAY IT AINT SO!!!!
Hi, I also have the same headphones and the same problem - only on HTC Universal flashed with WM6.
I search a bit on Google and it seems that the problem is with MS Bluetooth stack - it was working correctly for WM5 (but no A2DP), now in WM6 A2DP works, but handsfree does not.
Right now I'm testing alternative BT stacks - started with UniBT (it's Broadcomm stack modified for Universal) - now A2DP works flawlessly (before that, it didn't), but handsfree/headphones mode does not. At least trying to receive the phone call doesn't turn the headphones off.
i tested my fuze with a jabra bt2010 and it works fine. I'd prefer to not carry 2 bluetooth devices so i'm trying to find a way for it to work. I've been suggested to use a widcomm bluetooth stack as well but i dont know how to change my stack. If anyone here does know how to do it, please do enlighten us.
It's been nearly a month so I'm going to bump this thread in hopes of someone might possibly have some insight into this.
Push/bump.
I got the S9 now, it works for both functions but craps out completely when i'm outside, really bad signal reception as well as "muffled sounds" according to my audiophilic and audiophobic friends.
I think it has to be something to do with the actual firmware inside the bh200 that is wreaking some unknown havoc.
Dell bluetooth headset BH200 not working with Sony Xperia X1i
I have a Dell Bluetooth headset model BH200 and in A2DP mode, works flawless but the moment it is used with handsfree mode for call, the connection is broken and the headset switches off itself. This headset works very well with other non WM6.1 devices. Any clues with anony one what should be done in this case, some people have suggested JETware Hands-free Extension , any one tried on this.
I actually gave up on the bh200 and got myself a jabra bt8010. it works like a charm and the sound is just as good as the bh200
Indeed... i used to have a WM device (Mio A501) and I had the WM6.1 Pro..
I bought this BT at that time and it didn't work on WM6.1 (it even didn't asked me the PIN to pair it) but, when I tried with WM5.0, everything worked great, great sound on call's music, etc.. now I have a Sapphire and I'm not able to make calls on it (music works), but since I'm not driving and people used to look like "what a crazy guy speaking in English alone, no cables, it must be a mp3 or something.. hmmm" when I was on a call, it doesn't make a huge difference
i have yet to try this on wm6.5 but I highly doubt there would be a change..i'll give an update when I do charge up the bh200
i charged the bh200 up completely and tested it out.. it was a failure.. looks like 6.5 did not do anything to help...
Maybe windows mobile 7 will work.......... maybe.
You can use BH200 on call by this way only(I tested)
1. Turn on BT
2. Accepted call(However just Turn on your BT after accept call is OK)
3. Turn on BH200
4. Pair ur PDA w/ BH200
5. Done
IS this thead still active? I have a solution
Guys..
Use Reg edit and make the following modifications in your WM device by creating a new DWORD value 0 with the parameter UseESCO. Check out the path
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0 (Dont use space between UseESCO)
Then restart the phone and delete any previous BT devices on your phone, start up the paining process and get it to work.
worked flawlessly on my Dell BH200
Thanks,
Raj.
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
mputtr said:
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
Click to expand...
Click to collapse
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
sweet! thanks a bunch man!
prudviraj said:
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
Click to expand...
Click to collapse
Heya, Finally got back ot he US and tested out the BH200 with the fix you mentioned. it works!!!!!
although, i'm wondering if you're having problems with the bh200 not wanting to connect to the phone automatically.
Need help for the same problem in android
I am having similar issues on my Nexus one. Dell BH200 works for music playback but stops functioning when a call is made or received. Even the connection between the phone & BH200 gets lost.
I would be really glad to get some help on this.