Related
Hi,
i can't use the BTAudioToogle Tool for my XDA trion.
Someone the same problem ?
or better:
Someone with a solution here ?
Same for me. I have enabled BTaudiotoggle, I can hear the headset (Motorola HS850) go live but the audio either from WM player or TCMP still comes from the speaker and not the headset.
Hope someone comes up with the answer soon.
Rob
Got the same problem. No sound from BT.
Had something similiar to this with my old unit, to fully enable it I would hit the headset button (which now starts up voice command, let it time out, and then play whatever music i wanted to. I would verify that now but i am at work, and don't think they would appreciate the music blaring if i am wrong on this one
When I hit the button on the headset, it starts the Voice Dialer, the audio cuts in for a second or two, then drops back to the device speaker.
It nearly works, hope someone can hack this soon, just whats needed for podcasts and the like. No good for music tho!
Rob
I would also be very interested in a solution to this problem as I used to use BTaudiotoggle to listen to Tomtom commands in the car (normally have the music too loud to hear the commands through the loudspeaker ).
Worked great with my XDA Mini S but doesn't work with my new MDA Vario II and I didn't really want to have to buy stereo headphones, just wanted to be able to use my standard mono bluetooth headset like before.
If there is no way of using this program, are there any other programs that will send all audio to a mono BT Headset?
yep would really like an updated version of BTaudio too so i can listen to some audio books via my mono headset
You should test the trial version of bluemusic from teksoftco.
www.teksoftco.com . It gives ou a full help file on how to use the software and you have 30 sec to test that it working. I know that it works on the devices having TI Omap processors so it should work for all of you guys.
Cheers,
Raul
Just tried it out. It does the same thing that the other sotware does, mainly enable the headset where you can hear a hiss out of it, but still kees playing out of the back speaker.
My experience is a rassah's. All the Bluemusic software appears to do on my Vario II is cause the bluetooth headset to hiss slightly (whilst sound is still blasted out of the phone's speaker).
Also FWIW the teksoftco site doesn't appear to work too well on the PIE browser - defaulting to a no frames version with just a login box as far as I can see.
Needless to say I have uninstalled the software again.
Rufus.
@RufusA and @rassah guys you should check if you don't have the same problem as ulischultz in this thread :
http://forum.xda-developers.com/viewtopic.php?t=61739
We already tested the software with him on his treo device and as you can see in the thread " after pressing the button on the headset, the sound was redirected". This is mentioned in the help section of the software. ( on the universal/exec for example this step is not needed)
@RufusA - thanks for visiting the ppc version of the webpage (which is still under construction) - even though the subject is irelevant in this topic. I will send you a PM when its finished and tell me your opinion then (even though you have to admit that not many companies have a ppc version of their website - not to mention the smaller ones like ours).
If the problem still persists there is an opened thread on the forum :
http://www.teksoftco.com/forum/viewtopic.php?t=162
Please submit all the malfunctionality and we will fix them.
Cheers,
rain
I downloaded the trial too and had the same problem as before unfortunately.
I did get a little further in so much as, if I pressed the call button on my BT Headset as per the instructions, I could get the music/audio transferred to the headset for approx. 5 seconds but then it would revert back to the phones loudspeaker. I couldn't get the 30 seconds that the trial software advertises
Fingers crossed someone will be able to work out a fix for this soon.
Thanks Nicky for the input. As i see the problem of bt headset being disconnected after 5-10 sec is a general one (and unfortunatelly is a problem in the RUU). We are trying to find a workarround with ulischultz but wouldn't want to get to driver level as clearly it will be fixed by HTC in the next RUU release if they don't want this devices smashed to their heads.
I will keep you updated if we find a solution for the interrupt issue.
Regards,
Raul
Solution
I have identified a solution to this which is working nearly perfectly for me. However, if you do use this then using the BT headset to trigger the voice dial/voice command/voice commander will no longer work.
Acquire a copy of of the BTAudioToggle software inc. BTAudioOn.exe
Copy this to a location on the phone.
Using a registry editor amend the following entries from
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
Path = location of BTAudioOn.Exe
e.g. Path = \Program Files\BTAudio\BTAudioOn.Exe
VoiceCmdDuration = 86400 (DEC) = 24 hours
This says for how long (in seconds) the audio will be passed to the headset for before timing out.
This however, will timeout earlier if no audio is coming through. I am not sure what will happen if something like TomTom is running but not speaking for a while. I have not performed timings as yet.
To activate audio through headset, press the main control button of the headset as if answering call/activating voice command etc. To deactivate, just press the button again.
Voice control apps will still work, but must be triggered from the phone itself, but voice will be picked up by the BT headset.
There appear to be some small bugs with this, such as after a phone call, using headset or not, the audio will stop being passed after hangup.
Please let me know if this work for you!
Looks an interesting solution. I've installed BTAudioOn on my storage card, and changed the VoiceCommand Path entry.
However I couldn't find a VoiceCmdDuraion entry under
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
so I've added a new DWord of that name with the value 86400.
Yet this doesn't appear to have made a significant difference i.e. Pressing talk button on Jabra headset produces 10 secs of sound before "timing" out.
Have I made a mistake, or do I need to have something else installed to get this to work?
TIA - Rufus.
I was going to try and make the suggested changes to the registry but I don't know how and am not sure what program I need to do it.
Could someone please let me know what program I need to install to be able to change the registry?
Thanks
Vs1979:
IT REALLY WORKS!!!!!!!!!
I can't tell you how happy I am!!!!
I did it the way you described it. However I also did not have an entry "VoiceCmdDuration" I created the DWORD-entry and it works now!
Great!
Thanks very much for that great solution!
@RufusA
As i gave you the link to the other thread you're not the only user experiencing this. There are several others complaining about this RUU bug.
@Nicky
You need to install a ppc 2005 regeditor (for example Resco Explorer has one built in, or you can find one on buzzdev site).
RufusA said:
Looks an interesting solution. I've installed BTAudioOn on my storage card, and changed the VoiceCommand Path entry.
However I couldn't find a VoiceCmdDuraion entry under
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
so I've added a new DWord of that name with the value 86400.
Yet this doesn't appear to have made a significant difference i.e. Pressing talk button on Jabra headset produces 10 secs of sound before "timing" out.
Have I made a mistake, or do I need to have something else installed to get this to work?
TIA - Rufus.
Click to expand...
Click to collapse
Hi,
Did you Soft reset your device?
I made the registry change only, have not installed BTAudioOn and all my Voice command Audio etc... now comes through the headset and does not time out after a few seconds. I did find though that decreasing this value to lets say 60, would actually time the audio feed out even if not in use so I have stuck in a huge figure, will still need to do more testing to see if drains the battery any quicker and see if I can find another stirng which will do more for me.
Hi,
it work not for me
i have changed the path to \xx\BTAudioOn.EXE
i have add the VoiceDuration = 86400 (DWord DEC)
but it is the same problem, after 2 seconds the sound goes back to PPC.
Hi!
In the last some days i read a lot and found the following :
1. download the widcomm stack from axim site : LINK
2. install it + do a soft reset
3. get a registry edittor (Resco, CECMD etc.)
4. change these values :
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Device=COM
FlowControl=0
Parity=0
Port=1 (This is the most important thing!)
-soft reset
-at the today screen you will find a BT icon, click on it and have fun
TESTED FEATURES
-BT FTP, tested with : SE K750i, hx4700.
-ActiveSync : NOT WORKING
KNOWN ISSUES
-unable to control from comm manager
-blue led not flashing, easy to forget
-a2dp not tested
-tested on aku3.2 and aku2.3 roms, others maybe ok.
-other devices can't download bt services list, but the services works well.
-maybe unable to remove, not tested yet
-turns off, when you trun off your device, that maybe a problem with BT headset.
DO IT ON YOUR OWN RISK
Great news! Posted an announcement to the SP & Pocket PC Mag Expert Blog too!
Problems!!!
I've just installed the bluetoth stack in my phone. I've not yet tested it but i've found two showstop problems:
- activesync doesn't work anymore
- i cannot start the comm manager anymore (when i press the comm manager button in the upper left corner i can see only a small dialog with wifi and bluetooth power levels)
This is what i've done (maybe i did something wrong):
- copied the cab to storage and ran it (installed in device)
- soft-reset (required by the installer)
- edited the registry according to the first post
- soft-reset
I'm using an aku3.2 rom
-----EDIT--------------
Comm manager is working again. I had to reassociate it in Start-Settings-Buttons
Still no activesync (over USB at least)
bye
bye
Has anyone else tried this then? Has anyone tried the hermes cab install found in here...
http://forum.xda-developers.com/showthread.php?p=1072292#post1072292
There has been reports that it works on the trinity as well, so it may work on the Wizard.
Edit: No it doesn't. I have just ried it and it gives the memory error.
took the plunge and tried it
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
new2city said:
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
Click to expand...
Click to collapse
Did you try tweaking the BT params (for example, lowering the bit speed) to see whether it would work at lower bit speeds? See my related articles.
got look out for the links to your tips and tricks again
Hi Menneisyys,
Surrendered on Widcomm stack almost 2 months ago, now have to look again for the links for your tips and tricks for the Widcomm stack again...
Any idea on how to restore audio to my speakers... still dead at the moment... sigh... don't want to restore my back up yet...
i found that you don't really need to remove the shift* keys. if you already removed it, download the BTSpeedSwitcher from the download link, and set the speed to 921600bps. that may help.
Got it working fine
Thanks, but now I am a bit unclear, but will clear things up later. I used the speedswitcher as you suggested and but I had to disable audiogateway before it could work... now I am stuck as I put my wizard into standby and now it won't come back.... on... doh!
Well, one thing I can confirm, you can put it into standby and the bluetooth is still on.......
will feed back more when I get a clearer picture of what happened.... The sound quality is great..... just skipped for a second but is not back to normal again...
My wizard has now a nice quality A2DP sound without the high pitch noise...
went to http://forum.xda-developers.com/showthread.php?p=1073003&posted=1#post1073003
and used the files from Superdave... all is well now... look at my reply at the hermes thread.. Now I will just back up this "working configuration" and retry these settings on the cab from Aximsite... All the same, thanks to the legendary Mikelspikel
Just wanted A2DP to work so bad.... and it does now. nicely..
new2city said:
Got it working
Click to expand...
Click to collapse
Okay, when you get time can you stick up how you got it all working? Many Thanks!
Ive installed the Superdave BBS_HERMES_03.CAB file and then modified the registry to use the above settings but every time i do the soft reset, the registry settings go back to the original values. Im stuck here.
Oh and i am using the last T-Mobile UK rom. (2.0 i think)
Edit 2: Now got it working. I had to kill voicecmd and cprog for it to load without giving the memory issue!
new2city said:
you can put it into standby and the bluetooth is still on.......
Click to expand...
Click to collapse
as it should - BT is on on PPC PE devices in standby mode, unlike on plain PPC's.
peetking said:
-unable to control from comm manager
Click to expand...
Click to collapse
It looks like comm manager is just an HTML document in the /windows directory. (Should be simple to redirect the button)
Leaskovski
sorry for the late reply but had a few setbacks during the night(I am in Malaysia)..
Got A2DP running all night and by mid morning... suddenly all went to hell..
1) No skipping with your suggestion of using MikelSpikel's speed switcher.
2) While trying to put it to standby to test if BT still works and it hung at first attempt. Something must have happened here as I recovered using the reset button and then suddenly I could get it to revert back to built in speakers and headset without issue. I thought, cool, it is like complete solution...
And then, I decided to backup this "complete solution" with SPB backup.. and after the softreset, I lost the ability to switch between headset and speakers. Then during the night while I sleep and use the headset, at around 3 am... the skipping came back...
and then... I restored the backup and now... got to tackle the skipping again.. never mind the muted speakers..
What linespeed(I use 320 dec), Blocks(16) and subband(8) do you use? I followed MikelSpikel's settings which work ok... last night...
back to the drawing board..
Right, i installed the superdave 03 version and then opened up the registry to make sure the settings matched the ones above. I had to kill cprog and voicecmd to start it without the memory error.
I have tested it now and although it is loading up ok, my headset connection is just not working properly. Its paired ok but nothing is getting routed through. However, my gps bluetooth device paired okay and is working fine with iGO 2006 after doing a detection. Damn shame about this headset! I am using a parrott ck3000.
redo..
Re-installed everything again and now I got a working version, some things to note though on my wizard..
1) I must overclock to 260mhz(battery status method) before I get skip free music.
2) Leaskovski, I had the same problem too in the beginning, where there is no audio getting through. Did you go to Bluetooth Manager and check the status of your headset? i went to mine(ItechS35) and I can see that the Wizard is sending data through successfully but there is no sound coming out of the headset. I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Now hoping to find a way to redirect audio back to speakers when bluetooth is not used..
not tonight though.. its 10.46 pm now where I am...
This doesn't look promising for how i though the BT audio might work with this stack. I was hoping for something like the following...
"A good example of this is MS Voise command running on the MS BT stack. The two devices are paired and connected, however there is currently no streaming. You then receive the text message and MS Voice command reads the message back to you. Just before the message is read, the connection between the devices is made live, and thus the message gets read over the BT headset."
I was hoping that this was going to work for all applications like media player and iGO. I can reproduce what it is doing at the moment using the BTAudio programme that is available on these boards. I just wanted to get around this 'constant' streaming of silent noise.
Damn shame.
Okay for anyone wanting to play with this, here is how i installed and got it running...
1) Download from this thread post http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 the file BBS_HERMES_03.zip.
2) Install onto your wizard and soft reset when asked. Upon the reset, the device will moan at you about not having enought memory to load the drivers. Click ok to close this.
3) Load up your registry editor (i use FDCSoft Task Manager) and make the following mods as stated in the first post...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Port=1 (This is the most important thing!)
If you only want audio routed to headset when there is audio to route then make this reg edit...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugins\handsfree]
Audiohandling=21
4) Do not do a soft reset yet.
5) Now fire up your Task Manager (i use FDCSoft Task Manager) and kill any memory hungry tasks. The ones i kill which then allow me to start the stack is voicecmd.exe and cprog.exe.
6) Now click on the BT icon in the system tray and turn BT on.
Obviously there must be some memory leaks some where in the wizard because a couple of people have said that later in the day, if you try to turn BT on again it wont start due to memory requirements. Anyway, the best thing i can think of is to leave BT on after you have turned it on.
Currently, the blue led will not flash when BT is one. Try not to use the Normal Comms Manager to turn BT one as well as i think this trys to turn the MS stack on which won't work (probably due to memory requirements! )
new2city said:
I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Click to expand...
Click to collapse
I didnt get this to work in the end by the way.
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
new2city said:
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
Click to expand...
Click to collapse
Hmm, i dont have those issues. I am using it with my carkit, so when i turn the engine off and remove the keys, the kit turns off. I haven't had to reset the device apart from when i have turned BT off and then tried to turn it back on again at a later stage (then giving me the memory issue).
I'm having troubles getting my car stereo to work with my wizard. When I get an incomming call, most of the time it doesn't let the stereo know. It also seems to only send the bluetooth signal for a couple seconds, then off for a couple seconds. My rom doesn't have A2DP, do I need this or what's the deal. TIA
Try this file. I got it from this forum. I don't know what it does but it works for me. I have a Motorola BT car kit and i was having the same problem. Take off the .txt, put in \Windows\StartUp and soft reset.
On startup it just opens the text file in word. Is it supposed to do that?
GreggSymington said:
Try this file. I got it from this forum. I don't know what it does but it works for me. I have a Motorola BT car kit and i was having the same problem. Take off the .txt, put in \Windows\StartUp and soft reset.
Click to expand...
Click to collapse
On startup it just opens the text file in word. Is it supposed to do that?
Click to expand...
Click to collapse
that is why you take off the .txt part so it should be just exe at the end!!! Just read what was said!!! duh
Ok, so it did that but it didn't seem to fix it. I'm using molski's 2.26.10.2 rom. Anyone have any other ideas/ thanks
What stereo are you using? I just installed a Sony MEX-BT5000 in my car last weekend, and it works fine (at least in handsfree mode -- haven't tested A2DP yet) with my Wizard with the Qtek 2.17.7.2 ROM and the Tornado A2DP fix.
I have a pyle deck. The wierdest thing is that it sees the phone sometimes and not others. And the phone sees the deck as handsfree but won't use it.
Anyone know ???
So i was playing around with this supid thing today trying to get it work and i figured out that it will work...but every time i have to press "turn handsfree on". But my stereo still doesn't reconize when it's ringing. So i guess the problem is that my wizard won't remember to leave the handsfree on, is there an always on anywhere? Please help me
look around in the xizzard upgrading part of the forum..somewhere on the first 3 pages of threads theres one labeled somthing like " how to keep Bluetooth, GPRS, WiFi enabled while in standby" see what that has to say about it because it sounds to me like what i was going trough with one of my BT headsets when my 8125 would go into the standby mode
Tried that, it didn't fix anything
A2DP is not working well.. when i use ad2p headset the audio fails VERY Much. If i turn off A2DP wmp plays well the music.
Is there any patch?
Thank's!
Fix!
I found this patch! It's not 100% good (sound fails ONLY time to time and drains battery ), but is almost, i think that with some work could get there...
lets make it 100% good...
http://forum.xda-developers.com/showthread.php?t=284974
this patch is not really working for me :/ i tried tons of patches but no go as of yet...
Is WM6 and ad2p no go? does it work better under WM5? or some issues? >.>
Or am i doing something wrong? Has anybody succesfully fixed thier ad2p under WM6?
if yes, what rom, what fixes? maibe radio rom? etc..
Thanks in advance
btw; tried Xplode's rom and now using Helmi's..
radiorom 1.13.. (not sure if that has anything to do with bluetooth >.>)
Xplode's i actualy ran perfectly once.. but never managed to recreate that after repairing my bt620s
thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>
Twistit said:
thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>
Click to expand...
Click to collapse
Use a registry editor and add the following to your BA registry:
HKLM/Software/Microsoft/Bluetooth/Devices
Add a new DWord: DefaultMTU with the Hex value of 2a0
Capitalization counts in te DWord.
BTW, I posted this 2 days ago in this same forum under the "muppet" thread. Search is your friend.
Thanks ^^ ill try it when i get home.. forgot my bt620s today >.>
Geh i did search ^^ but i never figured the Muppets would have anything to do with ad2p *grins* So many random topics in this forum it feels like searching for a needle in a haystack
No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^
Twistit said:
No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^
Click to expand...
Click to collapse
check this page:
http://translate.google.com/transla...arch?q=KB831722&hl=en&rls=com.microsoft:en-us
for some reason this KB article is only in Japanese but google translates it well. This is where I got my information and I can tell you I never have the difficulties yoiu are describing. Try the following steps and let me know if it working:
1. Connect the headset
2. open the media player of choice
3. start playback
4. pause playback
5. wait a couple seconds
6. resume playback
at this point it should play without any pauses/skips (works fine for me, but my BT range blows so bad, and my S9 headset is so uncomfortable I hardly ever use it. (If anyone wants to buy a nearly new S9 heatset let me know)
BTW It seems to be a known issue with BA + WM6 that headset disables all other BT connections. I would love to be able to use my GPS and headset together, but alas it disconnects the GPS everytime the headset is connected. Drop the headset and the GPS reconnects immediately.
One final note. All my testing has been done with the MS BT Stack. I read that Widcomm has no hands free support so I didn't try it.
Helmi's Broadcom Bluetooth Stack 1.7
I could never get the MS BT Stack to work right. Helmi made this test cab. It works well with my BA using WM6 and my Motorola S9 headset. The range is about 1 meter but the sound is good.
The BT manager format is accessed through the BT icon on the bottom toolbar.
I cannot upload the .cab file. Search for this file: HELMI_BA_WM5_BT1.7_TEST for great quality BT on BA WM6.
One way to solve the BTA2DP problem & it supports stereo. You can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right
thanks alot trying the teksoft one and so far it works fine ^^ maibe ill see if its possible to skin the buttons tho
@kasush That method doesnt work for my headset, the Jabra BT620 can be a real ***** even on my laptop at times.. so i really need to turn off the wireless stereo.. So gues the S9 isnt that bad apart from the fact its not so comfortable.. the BT620 is great.. when it works ^^ just turning off the bloody blue rings on the headset everytime is anoying *grins* people think ufo's landed when i ride around with those on.
(Lol, just noticed there is a firmware upgrade available for my BT620s :O.. lets see how that works out ^^)
Mogul Widcomm stack
Has anyone successfullly installed the widcomm stack on their mogul. My pioneer Avic D3 hates the Mogul's MS Bluetooth stack. Keep me posted hackers! I love this site btw. I'm it's *****.
If you have a bluetooth headset, then BtMusic will redirect all your audio to the wireless headset.
It will even resume the redirection after a phone call. So if you get a call while listening to an audio book, your phone won't start talking (with that scary computer voice) and won't not frighten people around, when you finish the call
all files that you need
i haven't tested this with a phone call cuz i'm nowhere near a phone to see if this app does what it supposed to with phone calls per say. the music does transfer.
Hi,
there is a new version of this software available at: http://www.maxmobilesoft.com/index.php/software/btmusic
It didn't work after install
Thank you for your BT.Music. But It didn't work after install.
maximb said:
Hi,
there is a new version of this software available at: http://www.maxmobilesoft.com/index.php/software/btmusic
Click to expand...
Click to collapse
Unfortunately can not register - or better say registering has no effect - you can not download the latest version...
would love to test this though
just uploaded btmusic 1.0 beta
henftling said:
Unfortunately can not register - or better say registering has no effect - you can not download the latest version...
would love to test this though
Click to expand...
Click to collapse
which user name did you use when regististering?
not working on the Diamond with bepe's ROM 0.54.
There is an error message about the .net CF (install these versions....) - but I guess bepe included a .net CF
The feature i'd incredibly love to have, is a 'auto on' feature :
I try to explain.
To use a gps software in a car with bluetooth equipment, today, I have to
- activate bluetooth sound permanently using btmusic, includinc when the gps soft ware as nothing to say.
or
- putting the music of my radio very low to try to hear guidance instructions.
What would be fantastic is :
When my phone is paired with a bt handfree device :
When there 's no sound from the phone then music is playing on my radio.
When there's a guidance instruction (like when there's a phone call), by bluetooth car kit cut the music and play the instruction over the sound system...
do you think it would be hard to develop?
Thanks in advance!
maximb said:
which user name did you use when regististering?
Click to expand...
Click to collapse
I registered with "henftling".
My xda is broken now. As soon as I got it back I will give vfeedback. - Thanks for uploading 1.0
pehun said:
The feature i'd incredibly love to have, is a 'auto on' feature :
I try to explain.
To use a gps software in a car with bluetooth equipment, today, I have to
- activate bluetooth sound permanently using btmusic, includinc when the gps soft ware as nothing to say.
or
- putting the music of my radio very low to try to hear guidance instructions.
What would be fantastic is :
When my phone is paired with a bt handfree device :
When there 's no sound from the phone then music is playing on my radio.
When there's a guidance instruction (like when there's a phone call), by bluetooth car kit cut the music and play the instruction over the sound system...
do you think it would be hard to develop?
Thanks in advance!
Click to expand...
Click to collapse
Did you find what you were hoping for?
nope, i'm looking for that since 3 years...
the badest think is that's fonctionnality is integrated in symbian, and in some bluetooth stacks in windows mobile...
Hi, in which bluetooth stacks is it possible?
I have a touch diamond and I'm trying to find out an app that does what you've described...
I don't know it's name, but in the stack included in the wm6's roms for the fujitsu siemens T830 on this forum...
I never seen this stack elsewere...
In this stack there's an option "put audio throught bluetooth" wich do exactly what I want.
pehun said:
I don't know it's name, but in the stack included in the wm6's roms for the fujitsu siemens T830 on this forum...
I never seen this stack elsewere...
In this stack there's an option "put audio throught bluetooth" wich do exactly what I want.
Click to expand...
Click to collapse
Asus and LG can do it because they are using Broadcomm/Widcomm stack
BT with Igo8 on Diamond
Im using the BtMusic to redirect the instructions from IGO to my BT headset , eventhough its written here and in the developer site that the BtMusic resume the redirection after a phone call, every time i hang up a a call during navigating, the sound return to be heard from my diamond speaker...
any ideas???
Unfortunatly BtMusic 1.0 beta is not redirecting the sound to the bluetooth headset on my Samsung Omnia!
Can anyone help here?
Ehi man...
I've just tried the 1.0 BETA version and it says to me that it is expired on 1st september!
Any solution?
EDIT:
Just downloaded the 1.0 Beta verion from the official website....
It works like a charm on my TOUCH!!
Works great ...1 request?
hello
thanks for the great application
works well on my Eten Glofish M700 with WM 6.1 rom by TB_TB
the best feature in my openion is that it resumes BT redirection after hanging a call
i used acb ToggleBT that do the same job ... but after installing MS voice command 1.6 it makes the sound come off the phone after a call
my only request is that i had acb ToggleBT mapped to a hard button, when i press once i get voice out of BT & if i press again it goes back to phone
maybe something like the following when mapped to hardware button can happen with next version:
if i click the mapped button, BTMusic screen shows up, BT gets enabled automatically (as if i had clicked left softkey), then the BTMusic screen closes by itself....if i click hardware button again, BTMusic opens then it gets disables automatically then screen closes by itself...
but what happens now is that when i mapped BTMusic, i click & i get the application screen ...then i have to click on "enable"...or "disble" to divert the sound
it would be super nice if you can add toggle function, maybe a link inside the program folder to toggle BT on/off?
Thanks again...GREAT job
expiry date
the latest btmusic cab works fine...
still can not link it to hardware button for toggle action (hardware brings up software screen to furthur choices but does not activate/deactivate BT by 1 touch yet)
also has a popup that says expired 10/15/2008, although the application keeps working fine its just annoying popup...i contacted developers & he wants $10 to release a code that makes it go away...i think its little pricy for a small cab...i wish it gets released as freeware
Thanks for a great application