Database Users

O2 XDA 2 BLUETOOTH HEADACHES

Hi,
I've recently purchased an xda 2 from O2 it came with a free bluetooth headset, but I've a few problems and wondered if anybody could answer a couple of questions.
1. The little blue flashed LED, is it meant to flash all the time that bluetooth is being used? It seems to start flashing and then just stop.
2. When I go into my bluetooth settings and turn it back on when it's switched itself off I don't get the LED flashing then I go back into the settings again and it says that it's off. Is this what it's meant to do?
Any good guides/tools about using bluetooth with this device?
Beginning to pull my hair out and I've not much to spare!
Cheers
Marc

Free? from O2? how?
1stly howd u manage 2 get sumit out of O2 for free? i would be worried about that allready!!
what bt Headset did u get? with mine, i get a blue light flashing intermitently when the headset is turned on, and it doesnt change when im making a call.
which bt settings are you talking about? obviously you need to have bonded with the device, which the headsets instructions should cover.
to turn bt on the phone on you click on the bt icon at the botom of the active screen and select the On radio button.
if headset profile is enabled then there should B a small blue headset symbol next to the bt symbol, if its not set, or not turned on then it will be gray. if it is gray then click on it and hopefully it will turn blue to activate the headset profile.
there are sum interesting bt tools around, but the "recomended" setup is the Pocket Bluetooth Tools for the O2 XDA II and the MDA II which is available from here:
http://bluetooth.i-networx.de/index_e.html
I hope that helps.
Smiley

sounds like you are using bluetooth tools and have got the clock symbol live (not greyed out), it times out the internet connection but doesnt seem to tell o2's software that it turned it off so when you go in, it quite often seems to think its on when its actually off !!

Hi, I didn't have the bluetooth tools loaded, but I've downloaded them from the site you suggested and everything seems to work better.
The headset did indeed come free from O2 I was quite surprised too.
I've think I've attached an image of it, not sure what make it is does BlueTrek sound good?

Yeah that sounds about right, their website doesnt actually give any details, helpfull as allways!! :roll:
neway, have u got everything working properly now?
Smiley

Hmm...somebody had the same problem with his Bluetreks G2 and the XDA2.
He did a special pairing mode and it solved the problem.
I think its in the G2s instruction manual.

Had a look at the manual can't see anything special in the way that you pair the G2 to the XDA2.
Do you use this bluetooth toolkit?
It still seems flaky, I tried answering a couple of calls with the headset yesterday and nobody could here me at the other end of the phone. Sometimes I get it where the phone says that I have "no bluetooth available" I have to remove the battery and insert it again. Is this normal?
Regards
Marc

Marc,
I get the same symptoms you describe when I'm using ActiveSync with my XDA2 over bluetooth, but never with my HBH-65 BT headset. I'm not using any additional bluetooth tools or anything like that. Just the standard built-in bluetooth on my original (November 03) ROM.
Sometimes if my bluetooth ActiveSync connection is idle for a while the connection drops and the flashing blue light on the XDA2 goes out. However, if I tap the little blue BT icon at the bottom of the Today screen, the setting shows that BT is still turned on. I have to tap it on, then off then on again to cycle the status and convince the machine that bluetooth is really back on again. :? This sounds like the problem you describe.
However, no problems like this with my BT headset, which works perfectly.
This isn't any help, but at least you know you're not alone!

Does anybody know if a registry entry exists to turn the bt headset profile on and off?
I've got headset working now but it switches off frequently.
Cheers
Marc

I have a BlueTrek G2 for my Imate and it's working with no problems at all ... I tried BT tools but didn't find it useful as I thought it will give me a "Hands free" profile but it doesn't :x
mokl: maybe it's a ROM issue ... mine is 1.72 WWE, what's yours ?

The rom version is 1.60.00WWE

Just to let everybody know, I had some major problems with my bluetooth on my XDA 2. Tried everything, eventually got a replacement from 02 and the new one works fine now, so it must have been a hardware fault.

Widcomm Phone Edition stack working - get it here!!!

Hi Guys: I have got the Widcomm Phone edition stack working on my unit.
It seems to be fine but I have not fully tested all aspects of the software - so if any little bits don't work, let me know...
You need to install the official widcomm 1-4-1-59 version
Then you can upgrade it using the cab file I have made.
The 1.4.1.59 version file I got from the following topic
http://forum.xda-developers.com/viewtopic.php?p=57550#57550
thanks go to mamaich for the file.
the upgrade file consistes of the PE edition files and the required registry entries.
Let me know how you all go on with it - but I am not really a hacker so any serious probs I will not be able to fix...
if anyone else can improve on the installation be my guest

any news about which profiles it support that ms or the old one dont support ?

I hope unintall won't mess up my volume as in case of original bluetoothgps.cab

I can't garauntee it works perfectly, so I suggest everyone make a backup of their system before use.

has anyone tested any BT headset with this new stack?

I've got it installed and it all seems to work well exept for the handsfree/headset profile, I have set up my headset ok it is discovered and bonds fine but when I try to connect from the xda2 the connection fails after "waiting for device" for some time. tried with a motorola hs 810 and a neovoice usb, same with both. Anyone got any ideas?

BT headset
I have a 6315 and an XDA 2, I haven't tried the BT Stack on the XDA 2 yet but I found when I bondeded my HBH-30 to my 6315 once it made the connection my BT Headset shut off for some reson. This caused the bonding to fail, but as soon as I turned my headset back on (while it was trying to discover services) it completed the process and worked on my 6315. I'm not sure if this will be the same, but it's worth a shot.
Brandon

Test results
Hi fellows
Here is little bit of my testing of this new BT Stack, which we all awaiting for..
Proc…
1. Installed as per instructions 1.59 without any problem. During installation was prom to override .dll files – agreed to do that. For good or for bad – will see later.
2. Installed .cab file provided by icarusbop (big thanks to him for doing this) without any problem. Screen shots will be attached below.
3. Reset it as requested upon installation and got Widcomm BT working instead of MS BT..
4. Paired it with my BlueTrek G2 within 3 seconds (which took usually 10 sec with MS BT)
5. BT recognized G2 as device with Headset/Hands-Free profiles and asked to use as default… I said yes…
Here comes Cons part ;(
1. Unfortunately even after paring – my I-Mate can not get connected with G2 (see screen shot)
2. As you can see in another screen shot – there is Hands Free menu – it can not be accessed, or can be accessed ONLY while connection is established.
3. AND the last L … So, this new BT is not working now… I decided to go back to MS BT… SURPISE!!! I am getting message that BT HARDWARE IS NOT INSTALL ON THIS UNIT…. L Assumption - .dll files were overwritten (see Proc 1)
Here is my 2 cents in this jorney… I am hoping that described problems can be fixed and we can make it working (without doing hard reset on my device )
Paul

thanks guys! for testing hands-free/headset profile. by now everything seems to work fine with this new stack except for hands-free/headset profile.

New comments to my testing
1. I tried what NeoCole recommended - didn't work for me
2. As soon as new BT is OFF - MS BT is working fine .....uf
LETS FIX THE HEADSET PART PLEASE

I posted this is another thread - but in case someone does not read that thread . . . it is relevant here as well.
If the intent of this is to get voice dialing without touching the device, that is by only pressing a button on the headset to initiate a voice-dial program to make the call, there is no evidence this works with this BT stack either.
I have been reading other forums with people who have the H6315 already (mine is in the mail to me now) and none of them have been able to make this work. Nor is there any mention of this capability in any of the literature and/or documentation for this device. It seems that if this was a feature of this phone, it would be prominently displayed!

Voice Command
Okay.. on my 6315 I press the headset button, it beeps, sound and voice is now transfered to the headset. I do this before I initate voice command. Now all I do is press a button that activates Voice Command on the PPC and walla, I'm speaking and listening through my BT Headset. This is a huge step forward from using the MS Stack, and I feel that since the Phone Edition of the Widcomm is 1.0.0 I'm sure that they'll associate a hardware button with the headset button in future releases. Anyhow.. I think that the functionality of the Widcomm BT Stack is well worth the work. The XDA 2 would be a lot better device if the BT Stack worked 100% of the time and was fully compatibile.

I also have not got it working.
the Hp 6315 is well know to still require a hardware button press (not on the headset) to activate voice command. They can still not do with any nokia or SE phone can do easily.
Surur

VoiceCommand
That would be correct... One press of the HW Button does it all on a Regular phone.
The 6315 has brought it closer to allow you to interact with programs using your BT Headset, but yes you must still activate the programs on your handset before you can use them with your headset.
So.. to sum it up...
1. You can't interact with Voice Command using MS BT Stack on an XDA 2
2. You can interact with Voice Command using Widcomm Stack on 6315, but you have to activate the headset first, then start VoiceCommand on the PPC by using the HW Button.
Hopefully through this thread we'll be able to give the XDA 2 the same functionality as the 6315.
And maybe if Widcomm provides an update to allow the headset to activate a HW button, we'll be to the one step solution.

I do not want my comments to be read as stating that this is not a worthwile endeavor. I simply meant to make sure that someone does not go to the trouble of installing this new stack (particularly those who might be considered novices) with the mistaken impression that by doing so they will have that "one step" voice dialing solution.
This is by all means a worthwile endeavor, but it is merely a step down the road . . . not the final destination.
Y'all are doing good work - keep on blazing that trail!

hm.. I would think that it is more of MS Voice Dial functionality than BT - to recognize signal sent from headset as request for voice dialing.
When MS released first version of Voice Dialing they did not expect new functionality to have BT headset with hands-free profile connected to the device.

paired with my Jabra 250 = ok
connected to my Jabra 250 = failed

No luck with Moto headset
Eveything else seem to be working. No problems with detecting and working with BT access point

rehman said:
I hope unintall won't mess up my volume as in case of original bluetoothgps.cab
Click to expand...
Click to collapse
Hi Rehman,
i tried to install and uninstall, for the very first time i didn't have to get a Hard-Reset done. the volume didn't disappear. so i believe trying it wont be a harm, but yet i would recommend to get a full Backup first.

Trying to figure this out
Okay, I looked through the whole registry. I can't find anything out of the ordinary. Only thing I can think of is the sound driver. Does anyone know what DLL that is? I bet it's a different version.
If someone that knows more about which DLL does what. Let's get all the DLL's that could pertain to Sound and Phone and compair the 6315 DLL's with the ones on the XDA2.

"No Bluetooth Hardware" - and I haven't done any u

My Jam has recently decided that I dont' have any bluetooth hardware.
I have seen people complaining about this problem after they updated Radio or ROM - but I haven't done a single thing with my JAM. What they hellis going on. This thing is total piece of garbage....

you need to soft reset it

i have the same problem plus i have no audio on my phone..you can say that again man. abviously i already made a soft reset been doin it for 2 days now! damn! :x help anyone?

This is total garbage. How can a phone just start malfunctioning like that for no reason? This is pathetic.

I have an experience as: I have installed the radio scheduler which I can set to turn BT on and off as pre-scheduled. During the time the BT is off as scheduled, I manually turn it ON then the device say: No BT Hardware. During the time BT is ON as scheduled, I turn it OFF then ON again, no any problem's arised. When I uninstall the Scheduler software, everything's OK. But because I need radio scheduler application to turn GSM/BT ON and OFF automatically as my schedule so I decide not to touch the BT Icon in the bottom tray when BT is off. Without that problem the software run perfectly.
My XDAmini's BT is perfectly paired and worked with my Jabra BT 258. For Async function with my laptop, I use BT Tool 1.0 patch.
So for your cases, I think there is some software have been installed to turn ON/OFF BT function in lower level than the Microsoft's BT stack. Then when MS's BT stack come to check the hardware has been turn OFF, it found NO BT Hardware.
Hope the explanation may help.

I've the same problem with a french ROM. There is a message that told "no bluetooth hardware on this device" but at sometimes il works for a limited time.
I've this problem only under 1.06 ROM not with 1.03.
I need help to resolve this. Soft reset and hard reset change nothing as reflashing with 1.06
Help needing :?

Normally the issue was going to be fixed
Normally the issue was going to be fixed in the 1.06 see reporting on issue

Well.... I had the same message before when I upgraded to MA_DANG_WWE_10600_115_10500_SHIP. Then after a hard reset the problem gone. But his rom is not so stable.
Now I'm using the ma_cdlsku1_10600_110_10500_ship but override with the US radio to 110. And I can say is the most stable I had try on others.
After every soft reset my BT headset will paired by it self with my XDAmini, not like the others which I need to pair on manually. But only one thing is when the BT converage is out of range it had to pair them again. Anyway this is better then nothing.
Note: the radio 110 overiding is not for BT improvement. Just that is for the radio signal upgrade.
Hope this help.

When you want to enable the bluetooth try to make it also discoverable to other devices. This will enable for sure the blue tooth and you will not get again a "No bluetooth hardware" error.

Not true. I have mine discoverable, but this problem seems to occur randomly.

what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..

bogs said:
what error messege do you get? i fixed mine by installing that buzztooth or switch application im not sure of the name, but just try to remember the application that you tried/installed before that enable/disables the bluetooth with a shortcut. ow yea and a little tweak on the registry fixed mine..
Click to expand...
Click to collapse
Explain de REGISTRY trick on the prog you install. Give us more information please

what error are you getting? i modified the registry because i had an license expired error..if thats not the error dont bother with the registry. anyway about the bluetooth device not found error i found out the SKtools application is doing it..so the easiest way would be a restore registry on the SKtools app then soft restart.
how long does it take for you guys on a HardReset to get to the startmenu?

Same problems here:
1- No BT HW found
2- BT SW detects Flight Mode on and a message pop up saying to turn off FlightM to activate BT...but FlightMode is turned off yet! than the message is in Spanish and my ROM is Italian....
Really an annoying problem!!!
I hope that HTC has been informed about this!

Today, i've got one more this error. I'll made a screen copy when it happen.
When the problem occurs, there is no possibility to select bluetooth, all is grey
How does i take a old bt manager (before upgrading it works very well)
Tx

Can bluetooth headset trigger auto answer?

Apologies if this is an FAQ, but I've had a quick look and drawn a blank.
I've just got my first Windows mobile phone (Vario II) and one of the things I really miss compared to my old Nokia, is that when I connect my bluetooth headset, I'd like the phone to switch to 'auto answer' and for the volume to be set to max. When I disconnect the headset, I'd like the phone to refert to a 'normal' or 'general' profile.
I require this because I use it on a motorcycle in conjunction with an intercom system, and I need the phone to auto answer after say 2 rings.
Is this possible on a smartphone?
Regards,
Glenn

Join the club mate......
I've been using the Vario2 in combination with a Nolan N-102 with the N-comm BT kit on it.....
I've been #$^&# with it for weeks now and I've made some progression...
First you need a program that allows you to select profiles like Nokia used to have...
I use PocketzenPhone but maybe there are some other(better) programs to do that.....
So then u can swith to a bike profile I've made and enable auto answer....
I've run the cab file to redirect BT sounds to my helmet in stereo (floats somewhere on this forum)
The only thing I can't do at the moment is enable Voicedial from the helmet...
If I press the button designed to start it ........f%ck all happens....
Still working on that but I'm running out of ideas....so any help would be appreciated...
Danny.

Pdanny said:
Join the club mate......
I've been using the Vario2 in combination with a Nolan N-102 with the N-comm BT kit on it.....
I've been #$^&# with it for weeks now and I've made some progression...
First you need a program that allows you to select profiles like Nokia used to have...
I use PocketzenPhone but maybe there are some other(better) programs to do that.....
So then u can swith to a bike profile I've made and enable auto answer....
I've run the cab file to redirect BT sounds to my helmet in stereo (floats somewhere on this forum)
The only thing I can't do at the moment is enable Voicedial from the helmet...
If I press the button designed to start it ........f%ck all happens....
Still working on that but I'm running out of ideas....so any help would be appreciated...
Danny.
Click to expand...
Click to collapse
Hi, the reason you can't activate voice dialing from your headset might be to do with the BT Audio cab you have installed to redirect sound through your headset. If the cab you have installed is the most common one floating around then this actually disables the launch of voice dialing in favour of being able to toggle between sound in the headset and sound on the phone (pressing and holding down the call button for a few seconds on your headset normally).
If you look in the registry HKLM>software>OEM>voicecommand, if launchapenable has a value of 0 then it is disabled. You can enable it again by changing the value to 1 but this will mean that your headset button will now not work as an audio toggle feature because it will launch the voicedial software every time.
Not sure if this is the answer to your problem but it sounds like it might be, hope this helps

Am trying as we speak....thanks for the reply....see wat happens...
D.

Well.....Ive got good news and bad news....
The good news is that I can trigger voicecommand now......
The bad news is that MS voice command 1.6 is not reconizing my accent...(dutch)...
So out of 10 tries it never called the number i wanted.....
So I tried the build in SDdialer.....and that one is doing a better job....
However I can't make the sounds to stick in my helmet........
I mean...
With MSVC by pressing the button on the helmet I could redirect the sound to the helmet and get a voicecommand tone at the same time....
By symply not speaking or saying '"cancel" it would cancel the voicecommand but the sound stayed in the helmet.....
With SDdialer following the same steps as above the sounds does not stay in the helmet but goes back to the speaker......
Any ideas????
BTW is there a dutch version of MS voice command?

If you go back into the registry, in the same location as before, check the value that is in VoiceCmdDuration (This is the amount of time the voice prompt stays active for in seconds) .. the audio cab file usually sets this to 86400 (24 hrs in seconds), if yours is low eg. 10, 20, 30 etc.., set it to 86400 and that may sort out the problem.

Duration is set fort 24 hrs....already..
Funny thing is that MSVC is not cutting out and the sddialer is...
Regsetting stay the same.....
By pressing the button on helmet I just change the exe file.....
Only option is to try and get MsVC to work and get use to my voice....
D.

Hmmm booking slow process.....tryed to call with MsVC and now 2 out 2....
Ordered to play media from helmet......worked..
This is only sitting in the livingroom with helmet on.....looks absolutely silly but thats besides the point
P$ssing with rain here so hoping for better weather to go for a roadtest...
So thing needed for me to get it to work...
-MsVC 1.6
-Bluetooth stereo cab
-Regedit from the MsVC topic..
-PocketzenPhone for designing profiles.....however thinking on removing that...and see how that works.....
D.

I am glad that you are at least part way there to solving the problem
I don't have Voice Command on my phone. On the rare occasion I use voice dialling I use the standard SDdialer program but my sound diversion does not revert back to the handset like yours.
I must have changed something on it to get it working but I am afraid I don't know what because, when I was trying to get it working, I tried absolutely everything and it was quite a while ago now so I have forgotten what I did
It sounds like Voice Command is going to be okay for you though so that is good.
By the way, Phonealarm is also another good profile switching program.

Thanks for the replies guys, but I think I may have accidentally discovered my own solution.
On my T-mobile vario II, if I go to the Phone->Settings and select the 'more' tab (need to scroll along the last tab at the bottom of the screen) there is an option to 'Automatic pickup' which will auto answer a call after x number of rings.
I had always assumed this would kick-in even if no headset was present. However, I've just done some simple testing, and it looks like the auto answer only kicks-in if the phone is currently in comms with a headset (I used a bluetooth one but probably the same for the supplied 'hands free' kit).
So this functions exactly as I want it to.
Oh, and Pdanny, for background info I'm using a Nolan 101 (no bluetooth) with speakers and mic installed. These connect to my 'Starcom' intercom (via an old fasioned curly lead) which allows me to hear directions from my 'TomTom' and also take phone calls via the starcom/phone bluetooth partnership. Down side is that the wife can also talk at me .
As I never want to initiate a call while riding, this setup works just perfect for me. I don't need to remember to change the phone setup either before or after mounting the bike. As soon as the bike ignition is turned on, the intercom partners with the phone. Then if I receive a call, it auto answers and I can take the call. Once the ignition is switched off, the phone reverts to normal non-auto answer.
In my research for this issue I came across an app called 'phonealarm' (from pocketmax.net), it was the manual for this that made me try the above experiment. This looks like a neat app and I may still end up installing it as long as it does not hog the processor.
[edit]OOps sorry Nicky, just noticed you already mentioned phonealarm. I'd be interested in any comments you have about this app, good ot bad [/edit]
Once again, thanks for the replies, and I hope this thread helps someone in the future.
Regards,
Glenn

Phonealarm......give that a try thanks.....
Im also going to test with the buils in auto pick up.....
I knew it was there but i assumed that it would ALWAYS auto pick up...
It seems that that is not the case therefore making the Pocketzenphone and possibly phonealarm obsolete.....
I also get all the sounds over BT in my helmet....incl TT
Also... I don't have a wife .......sounds like a perfect world hey???
Keep you posted on the outcome of the xperiment....
Grtz
Danny

Hi knnelg, glad you managed to sort your problem. I always knew the option for autoanswer was in the settings but like you, I had assumed that it would autoanswer all calls regardless of whether a headset was connected so it is handy to know that it only applies when in headset mode.
You asked about opinions on Phonealarm, I think it is a great program. I have used it on my Vario II and my last phone, an XDA Mini S, and it is has always worked fine, no problems at all.
I really missed having phone profiles when I switched to PDA style phones so Phonealarm was one of the first 3rd party apps I ever bought and I wouldn't be without it now Also, Bruce, the developer of phonealarm, is very good at listening to users input and if enough people make a suggestion about an improvement or tweak to the program, he will implement it in future versions which is really nice.
One of the other programs Pocketmax does, Alarmtoday, is useful too.

A2DP

A2DP is not working well.. when i use ad2p headset the audio fails VERY Much. If i turn off A2DP wmp plays well the music.
Is there any patch?
Thank's!

Fix!
I found this patch! It's not 100% good (sound fails ONLY time to time and drains battery ), but is almost, i think that with some work could get there...
lets make it 100% good...
http://forum.xda-developers.com/showthread.php?t=284974

this patch is not really working for me :/ i tried tons of patches but no go as of yet...
Is WM6 and ad2p no go? does it work better under WM5? or some issues? >.>
Or am i doing something wrong? Has anybody succesfully fixed thier ad2p under WM6?
if yes, what rom, what fixes? maibe radio rom? etc..
Thanks in advance
btw; tried Xplode's rom and now using Helmi's..
radiorom 1.13.. (not sure if that has anything to do with bluetooth >.>)
Xplode's i actualy ran perfectly once.. but never managed to recreate that after repairing my bt620s

thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>

Twistit said:
thought I fixed it but nope.. softreset and no way to get it workin again..
Anyone mind posting thier registery settings, rom etc if they have no skipping with ad2p? >.>
Click to expand...
Click to collapse
Use a registry editor and add the following to your BA registry:
HKLM/Software/Microsoft/Bluetooth/Devices
Add a new DWord: DefaultMTU with the Hex value of 2a0
Capitalization counts in te DWord.
BTW, I posted this 2 days ago in this same forum under the "muppet" thread. Search is your friend.

Thanks ^^ ill try it when i get home.. forgot my bt620s today >.>
Geh i did search ^^ but i never figured the Muppets would have anything to do with ad2p *grins* So many random topics in this forum it feels like searching for a needle in a haystack

No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^

Twistit said:
No devices under bluetooth, only device.. and under bluetooth/ad2p there is a map devices.. under device and ad2p/devices it didnt do the trick
wait wait.. hard reset.. and it worked.. now to see where it helped.. i stuck the key in 3 places.. lol
Jup just another soft reset killed it again (without removing one of the keys).. seems my ad2p only works right after a hard reset.. and then dies again.. no matter what fix..
Nother funny thing, before adding my bt headset it sees my laptop bluetooth.. after connecting the headset it sees no devices..
HmHm.. going to flash pdaviet on it in a sec radiorom 1.15.. try that.. maibe try the helmi's broadcom bluetooth stack..
My solution with pdaviet and radio 1.15 ^^ connect the wireless stereo.. startup mediaplayer and listen how sucky it sounds..
hit pauze.. turn off bluetooth.. turn on bluetooth.. go back to the mediaplayer and make sure it listens to your bluetooth headset.. (play and pause if it the mediaplayer responds its OK ^^) And then turn on wireless stereo again.. its a hassle after every softreset.. but hey.. it works ^^
Click to expand...
Click to collapse
check this page:
http://translate.google.com/transla...arch?q=KB831722&hl=en&rls=com.microsoft:en-us
for some reason this KB article is only in Japanese but google translates it well. This is where I got my information and I can tell you I never have the difficulties yoiu are describing. Try the following steps and let me know if it working:
1. Connect the headset
2. open the media player of choice
3. start playback
4. pause playback
5. wait a couple seconds
6. resume playback
at this point it should play without any pauses/skips (works fine for me, but my BT range blows so bad, and my S9 headset is so uncomfortable I hardly ever use it. (If anyone wants to buy a nearly new S9 heatset let me know)
BTW It seems to be a known issue with BA + WM6 that headset disables all other BT connections. I would love to be able to use my GPS and headset together, but alas it disconnects the GPS everytime the headset is connected. Drop the headset and the GPS reconnects immediately.
One final note. All my testing has been done with the MS BT Stack. I read that Widcomm has no hands free support so I didn't try it.

Helmi's Broadcom Bluetooth Stack 1.7
I could never get the MS BT Stack to work right. Helmi made this test cab. It works well with my BA using WM6 and my Motorola S9 headset. The range is about 1 meter but the sound is good.
The BT manager format is accessed through the BT icon on the bottom toolbar.

I cannot upload the .cab file. Search for this file: HELMI_BA_WM5_BT1.7_TEST for great quality BT on BA WM6.

One way to solve the BTA2DP problem & it supports stereo. You can find these by the following link http://www.teksoftco.com/index.php?section=freeware & this software works too http://www.trianglepowers.com/PPC/ViewApp.aspx?ID=52 (have to register to download). I prefer Teksoft freeware as I am using it. Sometimes it takes a while after a few toggle u get it right

thanks alot trying the teksoft one and so far it works fine ^^ maibe ill see if its possible to skin the buttons tho
@kasush That method doesnt work for my headset, the Jabra BT620 can be a real ***** even on my laptop at times.. so i really need to turn off the wireless stereo.. So gues the S9 isnt that bad apart from the fact its not so comfortable.. the BT620 is great.. when it works ^^ just turning off the bloody blue rings on the headset everytime is anoying *grins* people think ufo's landed when i ride around with those on.
(Lol, just noticed there is a firmware upgrade available for my BT620s :O.. lets see how that works out ^^)

Mogul Widcomm stack
Has anyone successfullly installed the widcomm stack on their mogul. My pioneer Avic D3 hates the Mogul's MS Bluetooth stack. Keep me posted hackers! I love this site btw. I'm it's *****.