Database Users

XDA2 Rom Has Wrong Spec?

I recently got an O2 Xda2.
The specs say Xda2 has 64MB Rom and 128MB Ram, but when I go to <Start> - <Settings> - <System Tab> and <Device Information>, the <Hardware Tab> shows RAM size 128MB and Flash size 32MB.
Is this supposed to be correct?
Why isn't Flash size showing 64MB?
Also, when I registered with this forum, and after selecting my device as O2 XDA2, the Rom Version under the drop-down box offered an option of 1.60.00WWE. However, my Rom Version under <Device Information> was showing as 1.52.00WWE. Is mine an earlier version? How can I update it?
I'm a novice Pocket PC user, PLEASE HELP!!!!

It is correct, the rom is in 2 parts I think, primary and extended, in total 64 meg.

Qtek S200 Battery Registry Key PLEASEEEE !!!

Please enter your prophet registry and send me ALL FIELDS OF:
Hkey_Local_Machine\Drivers\BuiltIn\Battery
Dll -
Flag -
IClass -
Order -
Prefix -
For Prophet Qtek S200

[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Battery]
"IClass"="{DD176277-CD34-4980-91EE-67DBEF3D8913}"
"Order"=dword:00000002
"Flags"=dword:00000008
"Dll"="battdrvr.dll"
"Prefix"="BAT"
I have this on my S200.

Thank you , but unfortunately it does not help me
On my prophet is wizard's rom, and it is not charging, i think that if i change battdrvr.dll and replace, it will charge and give me chance to write right ROM for prophet.
If someone have any idea how to write right rom on s200 where is wizards ROM please write here.

Try this:
1. Obtain proper ROM for S200 from ftp.xda-developers.com.
2. Try press power button and hold it about 5 sec. or longe. Your device must go to PowerOFF state. At this point it must charge battery when your plugin power supply.
3. Run ROM update.

Vario died on the ipl/spl/gsm/rom screen.

I tried to flash my UK T-mobile vario to wm6, but the GUU reported error 300.
So I extracted the nb file into several nb files, and then flashed my device by the os file with aWizard. After the completion, I hard reset it, and it died on the ipl/spl/gsm/rom screen.
I tried to dump the OS to a sd card by romupdate, but it responded as follows:
r2sd all
***** user area size = 0x3BE00000 Bytes
R2SDBackup() - Download type = 5
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Cmd>
So what can I do now?

First go into bootloader mode and flash the original rom back.
You'll probably have a G4 phone, because of the error 300. Never flash IPL/SPL on the devices (WM6 doesn't contain it), because it will brick you're device.
Look at the G4 section on howto tell if you got a G4 and how to get past the error 300. For WM6 you're device has to be CID-unlocked.

Thank you for reply.
I have resolved it, just because the RUU on my harddrive was damaged, so I redownload it and then fixed my device.

How can I Super CID my SPV C500 without SPV-Service?

Hi everybody!
I want to upgrade my SPV C500(Orange) to WM6 but it not applications unlocked.
How can i do it without Orange method or SPV-Services?
Can i get a similar application to SPV-services for application unlock my smartphone?

the SDA unlock can not work?

Follow these instructions: http://spod.cx/blog/unlocking_orange_spv_c500.shtml
Basically, download the linked registry editor and change these keys to application unlock:
Code:
In: HKLM/Security/Policies/Policies
Change 00001001 from current value to 1
Change 00001005 from current value to 40
To do the sim unlock, you have to use SPV service or the other tool Karhoe linked to.

Error 226 flash write

Hello friends i'm italian and sorry for my english.
I have a problem with my hermes200.
I have flashing on my tytn a rom kitchen using "package tool by bepe" with nb IPL, SPL, Mainsplash, Subsplash, ExtROM and GSM extrated from original rom htc tytn wm6 and a OS.nb extrated from rom kaiser ITA wm6.1.
When the flashing is termined the hermes don't start: push power botton but the screen is black and only green light is ON.
I have flashed original htc hermes wm6 but i have "error 226 flash write" when the process is at 89%.
I have IPL-1.04 and SPL-2.04. CID.
SPL 2.10, SPL 2.20, SPL 2.30 are not possibile to install.
i have try command with mtty tool:
- task 32 -> FF
- task 28 -> format storage success
- task 2a -> fix bad block
- info 8 -> much bad block Os Win CE
I've try to reflash the original rom but the problem is the same
The battery don't possibile to charge and level should be of 40%.
Help me please....
Tanks!!!