Related
Please, help me in the following situation
I bought Qtek s100 It turns on only in bootloader mode. What was before I don't know.
Now I try to reflash it via PC. I unpacked rom 1.12 from imate and put there file MaUpgradeUt_noID.exe and then ran it. The utility can't see the device information (it is normal) but it can't see the informatin about the rom I'd like to flash. I click @[email protected] but it says it gather information about the device and nothing happened.
I tried to run again about 20 times, but nothing helped.
I tried to flash it via card using rom-image but there is no invitation to reflash though I flashed via card more than 20 times other htc devices and then everything was ok.
I ran mtty 1.42 and gave command d2s, but it said unknown command. Then I gave d2s command then the device turned off.
I have qtek s110 with broken display. Is it possible to change rom-memory?
Is it possible to get service_manual for magician?
Thanks
First of all, did you back up your current ROM to SD before Flashing new ROM.
1. Yes. It's VERY GOOD. Disconnect your device from PC. You need to insert SD with your ROM to the device and Turn On. Press Power or Cancel button (i didn't realy remeber try all). After that device will flash ROM form SD.
2. No. It's VERY BAD. You need to know start address form what device should start after Reset. Sory here i did not know what it is.
Ñïàñèáî çà ïîìîùü!
Ñóòü â òîì, ÷òî àïïàðàò ñ êîìïà øèòüñÿ íàïðî÷ü îòêàçûâàëñÿ. Ïîïðîáîâàë øèòü îáðàçîì ÷åðåç êàðòó (îáðàç ñíÿò ñ t-mobile 1.01). Íà îáðàç íèêàêîé ðåàêöèè.
Äàëåå ïðîáîâàë ñíÿòü îáðàç ñ ïðîáëåìíîãî àïïàðàòà. Àïïàðàò âûêëþ÷àåòñÿ. Åñëè ñ mtty äàòü êîìàíäó øèòüñÿ s2d, òî mtty ãîâîðèò, ÷òî êîìàíäà íåïðàâèëüíàÿ
Hi,
Read this http://forum.xda-developers.com/viewtopic.php?t=46628 about the SD flash
M
thanks, but te problem is the device doesn't want to work with card. No reaction on the card with rom-image, turning off when typing d2s
Don't know where you bought & how much you paid for it (sure hope it's less then a new screen), but sir I guess you're scr*w*d.
Maybe you can replace your broken S110 screen with the one from the S100. There's a rar file on the board, with a detailed description & pictures on howto disassemble your magician, think it's called disassembly.rar.
EDIT You can find it here http://forum.xda-developers.com/viewtopic.php?t=44841
M
thanks, but I think the screen is alive, it shows usb or serial and etc.
As far as i know, there is some diagnostic tests to understand where is the problem. how to activate it?
Diagnostics
Sorry I don't know of a diagnostics test. But you can have a bootloader without a working rom. Since you bought the S100 in a bootloader state, that's very suspicious to me. & that's why I advised you to replace the broken screen on your S110 with the one from your S100.
Hope you can sort it out & if you happen to run across a diag. pls update the wiki with it.
Regards, M
Hi folks,
Take it easy on me, first post and all....
Looks like i made the standard mistake and bricked my XDA orbit
I can get to the bootloader menu but cannot get any ROM to load beyond 3%.
The phone is owned by my employer and I need to sort it ASAP before the IT dept find out!!!
O2 are not interested in helping out as I cannot prove its under warranty and it now boots to a T-Mobile boot screen!!
Does anyone know where I can send it to get repaired, anyone out there prepared to sort it for a reasonable fee....???
Any help appreciated!!
Thanks
mcstorey said:
Hi folks,
Take it easy on me, first post and all....
Looks like i made the standard mistake and bricked my XDA orbit
I can get to the bootloader menu but cannot get any ROM to load beyond 3%.
The phone is owned by my employer and I need to sort it ASAP before the IT dept find out!!!
O2 are not interested in helping out as I cannot prove its under warranty and it now boots to a T-Mobile boot screen!!
Does anyone know where I can send it to get repaired, anyone out there prepared to sort it for a reasonable fee....???
Any help appreciated!!
Thanks
Click to expand...
Click to collapse
I guess you flashed it without cid unlocking it with USPL - did you not read my thread http://forum.xda-developers.com/showthread.php?t=306904
(forum rules read read read and more read)
Best option is to send it to imei check http://www.imei-check.co.uk/
they will cid unlock it for you and reflash original rom - and blag it with your boss
220v through the charging socket and ask for a new one!
Thanks Chaps!!
Have read through this forum through and through but alas a little too late!!!
Thanks for your advice though, will keep reading........
220v sounds like a last resort??
Someone else suggested a few seconds in the microwave!!!!
Did contact imei-check pasted response below:-
Hello,
Do you mean XDA neo or exec? If so we do *NOT* support this device at all. In case it is a XDAIII, XDAIIs, XDAIIi, XDAmini it only can be repaired from service centre by chip replacement.
So we are very sorry but we can not offer any solution for the device (it doesn't matter what version).
Regards,
IMEI-CHECK Team
This doesnt look to good?
Does anyone have any success with these guys and the Orbit?
Thanks again.
mcstorey said:
Thanks Chaps!!
Have read through this forum through and through but alas a little too late!!!
Thanks for your advice though, will keep reading........
220v sounds like a last resort??
Someone else suggested a few seconds in the microwave!!!!
Did contact imei-check pasted response below:-
Hello,
Do you mean XDA neo or exec? If so we do *NOT* support this device at all. In case it is a XDAIII, XDAIIs, XDAIIi, XDAmini it only can be repaired from service centre by chip replacement.
So we are very sorry but we can not offer any solution for the device (it doesn't matter what version).
Regards,
IMEI-CHECK Team
This doesnt look to good?
Does anyone have any success with these guys and the Orbit?
Thanks again.
Click to expand...
Click to collapse
I have read posts where they have sent their artemis to imei check - the reponse sounds confused - saying they do not support neo or exec but what about orbit?
I would contact again saying you have an o2 orbit = artemis they may have got confused if you just put down o2 orbit.
btw a wm6 rom for the orbit will be released soon - no dates yet - as its an official rom it will fix your orbit.
There are some posts here of people sending their artemis to imei check http://forum.xda-developers.com/showthread.php?t=294950
http://forum.xda-developers.com/showthread.php?t=315526
Originally Posted by "psanas"
"*this is a copy, it is not my work at all* just thought it would be helpful as it helped me restore my bootloader.
Your device is bricked, if and only if, your device won't start normally... even if you press soft-reset, hard-reset, or even bootloader mode buttons. Usually a brick is caused by improper ROM upgrade, and using tools that modify the ROM. Before panicking, do the following:
Brick Test:
Make sure your device has ample battery charge. If you're not sure plug it in with the wall charger for at least 10min
Remove your battery for at least 1 minute
Replace your battery while observing the LED lights
If the LED blinks once upon battery insertion, you might have hope yet
The only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
Remove battery for for at least 1 minute
Press CAMERA+RESET(stylus) simultaneously
Insert battery while still holding the buttons
Release the buttons at the same time (You should see bootloader screen)
Note: Failure to hold the buttons at the same time during battery insertion will cause it not to work
Manual to restore dead BootLoader (http://wiki.xda-developers.com/index...ame=BootLoader) Rover G5, Orsio n725, O2 Atom, O2 Atom Exec, HP6815 - Tested . (may be 68xx series)
© Copyright to Alex_Beda & 1stMASTER
PDA-HACK.NET Team http://wiki.xda-developers.com/theme...//pda-hack.net (http://pda-hack.net/)
If our article has helped you, you can donate the Web Money
WMID 378286389551
for WMZ: Z396747110007
for WME: E114645323227
for WMR: R351032339900
Thanks to all who helped.
Thanks to Winterice for the technical assistance and moral support.
Thanks to ant 125 for useful information
Thanks to Allbest, deniska.75, Borozavr, Erke for moral support.
Symptoms:
The device is not switching on, not entering bootloader.
(most often after the firmware from a memory card)
React to connect charger.
if the battery insert and connect charger, it orage led must be lit .
if the battery remove and connect charger, it orange led must be flashing.
There is only one way for restore bootloader.
Reflashing flash memory in the PXA272 using JTAG.
This procedure consists of two parts.
Hardware (making cable for reflashing) and software (reflashing).
Hardware part:
This pinouts JTAG of Atom Exec, Rover G5, Orsio n725, O2 Atom, O2 Atom Exec
At O2 Atom (not Exec) is the only internal contacts. Located near the Camera button.
http://i218.photobucket.com/albums/c...roverorsio.jpg
There are contacts inside the device, near the buttons CAMERA,
for access them, you need to open device.
There are contacts from the outside, near the SIM connector.
All contacts is working
For inside contacts need this connector
http://i218.photobucket.com/albums/c...eda/raz012.jpg
You can so using connector from floppy drive 5.25”. (autor vic180)
http://i218.photobucket.com/albums/c.../PICT0267-.jpg
http://i218.photobucket.com/albums/c.../PICT0262-.jpg
LPT connector for PC
http://i218.photobucket.com/albums/c..._beda/LPT1.jpg
Cable length of a 35-40 sm
This connector for outside contacts
Result connector from connector for floppy drive 5.25"
http://i218.photobucket.com/albums/c..._beda/raz1.jpg
http://i218.photobucket.com/albums/c..._beda/raz3.jpg
http://i218.photobucket.com/albums/c..._beda/vid2.jpg
.
for fixation connector need make this
Or other
http://i218.photobucket.com/albums/c.../kreplenie.jpg
http://i218.photobucket.com/albums/c...a/vidkrepl.jpg
http://i218.photobucket.com/albums/c...da/vidobsh.jpg
Software part.
http://wiki.xda-developers.com/theme...BootLoader.zip (http://wiki.xda-developers.com/uploa...BootLoader.zip)
In attached file is the programm JFlashmm,
in the same directory BOOTLOADER from ÀÒÎÌ ÅÕÅÑ (ebo_a.nb0)
from First Firmware,
and driver the giveio needed for working cable.
If you have O2 Atom (not ÅÕÅÑ), it must be in the folder jflash_mm
Deleted file ebo_a.nb0, copyng the fileeboot.nb0 from O2 Atom firmware in the jflash_mm folder
and renaming this file in ebo_a.nb0.
Before connecting LPT connector , you want to press and hold
micro button near to the sim connector.
http://i218.photobucket.com/albums/c...eda/knopka.jpg
For example: sticker on the button.
Ground from LPT connector, connecting on ground the device
(using the crocodile connector)
http://i218.photobucket.com/albums/c...eda/ground.jpg
Connect cable to LPT port of PC.
Connect charge to the device
Orange LED is blinking.
If LED not blinking,
Check pressed the micro button.
check fixation the button.
Installing the driver giveio from attached file.
Now you can restore BootLoader (http://wiki.xda-developers.com/index...ame=BootLoader).
BootLoader (http://wiki.xda-developers.com/index...ame=BootLoader) needs to be restored in two places.
Need boot flashing to adress 0 and address 3f400.
In folder jflash_mm there is a file start.bat.
Inside this file:
jflashmm pxa27x32 ebo_a.nb0 P 0 PAR
jflashmm pxa27x32 ebo_a.nb0 P 3F40000 PAR
So file ebo_a.nb0 (boot from àòîì exec) will be flashing in two places,
To adress 0 and adress 3f40000, data send to parallel port.
Execute start.bat, if all right , you correct making cable,
it must detect processor.
If message screen on "file *.DAT not find", press Soft Reset.
the program will ask you «bla-bla-bla» Y/N? Press Y
JFLASH Version 5.01.007
COPYRIGHT (C) 2000 - 2003 Intel Corporation
PLATFORM SELECTION Processor= PXA27x
Development System= Mainstone
Data Version= 1.00.002
PXA27x revision ??
Found flash type: 28F256L18B
Unlocking block at address 0
Erasing block at address 0
Unlocking block at address 10000
Erasing block at address 10000
Unlocking block at address 20000
Erasing block at address 20000
Unlocking block at address 30000
Erasing block at address 30000
Unlocking block at address 40000
Erasing block at address 40000
Starting programming
Using BUFFER programming mode...
Writing flash at hex address 3fe80, 99.85% done
Programming done
Starting Verify
Verifying flash at hex address 3ff68, 99.94% done
Verification successful!
So too for the second time in firmware to address 3f4000
You can disconnect charger and cable.
Enter bootloader :
Press Camera button, insert battery and press Soft Reset.
If everything was done correctly, it bootloader is running!!!
Now, as usual (almost)
Connect the device to PC.
Run update firmware for you device.
Must go update firmware.
If all right, it .......
Operation system update, bootloader update,
Running update ExtROM (http://wiki.xda-developers.com/index...agename=ExtROM), but, it should freezes at 6 %!!!!
Disconnect usb cable from device, Enter Hard Reset!!!
Device must switch on, calibrating touch screen etc.
Run again update firmware for you device"
hi
i have a QTEK S200. Today i tried to update my ppc with a WM6 version, but after 40min. the upgrade program crashed down.
After this it was impossible to enter in the main menu of the ppc. the ppc remains hanging on the QTEK screen. I've tried to enter in the bootloader with the color screen, to connect the ppc with my usb cable an the notebook, but my notebook does'nt find my ppc. And now the battery is empty (even connected with the usb cable on a working pc) and i can't switch on my ppc.
Any solutions?
Charge your Batterie and make Hard Reset. Charge VIA Caddy.
done. but the screen remains on the QTEK start page. Bootloader is possible and i get the 3-color screen but my notebook does'nt find my ppc... It's strange because yesterday everything was fine and the connection to my notebook was ok but in the 3-color screen i can't build a usb connection.
ok, problem solved. i've puted a new core on the ppc and now appears the old wm5.
how did you manage to get back to the old rom ? i am stuck on the qtek screnn and the only thing i can access is the USB flash 3 colors screen but my pc doesn't seem to the device...
any help greatly appreciate )
thx in advance
ben
do you have the problem with the SPL 3.08?
no I am in SPL 2.20... and IPL 2.09...
thanks for your help
please write the full ipl/spl number!
here it is :
IPL : 2.09
SPL : 2.20.0000
thx
finaly I manage to dowgrade it by changing my driver - the problem was coming from vista
important is to know, that the 3-color screen give the possibility to communicate with your computer (connected with usb).
so, you have the possibility to copy a new core on it. after that you put a new wm or you take the old one. in my case, the old wm5 was still on the ppc.
yesterday i was testing the wm6 in german but it was not really nice... so i work again with wm5 and wait till a complete wm6 solution is available.
Hello,
This is my first post on this forum.
Im new to the Pocket Pc's. I got this T-Mobile MDA II from my friend 2 days ago and that was the first time in my life when I touched the PPC.
I have a big problem.
MDA II is not reading the SMS (''the phone is not ready, try again in 15min'').
And another problem is GPRS. MDA says ''connecting'' or something like that, and nothing happens.
The PPC is from Germany, and I live in Croatia. And the language is in English-Germany.. Something is on English, something on Germany.
Can someone explain what's the problem ?
And another question
I download the WM6.1 AKU1.0(build 19199).
I can't get to the Bootscreen mod, I click the middle navigation button, then power button and nothing happens.
And where is the reset button ?
Sorry for my stupid questions and bad english.
But I need some help.. Please!
Please!
I need someone to explain how to install ROM on MDA II.
the reset button is on the left of the charging block ( tiny hole )
follow these instructions
Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
Run HimaUpgradeUt.exe
Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading ROM Image, please wait....',
but as long as the PC says it is done, then its all OK.
Detach your device from the cradle.
Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
===========================================================================================
PS: Upgrade on your own risk
omg this is amazing...
ather90 thank you very much!
6.1.1a16CS (WM6.1 AKU 1.0) ROM is great.
I can now use my camera, use gprs, use internet..
Wonderfull
good that you finally succeeded. now try 6.1.1b16CS (WM6.1 AKU 1.0)
usb craddle or usb sync cable ?
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
hagisbasheruk said:
Since this seemed a newbie type post i thought i would continue with a Newbie type question.
I also just purchased an Qtek 2020 and wondered if i need the usb craddle or would a usb sync cable do for rom upgrade.
Rom Ver : 1.72.00WWE
Rom Date 03/15/04
Radio Ver : 1.17.00
Protocol version 1337.28
ExtROM Ver : 1.72.181
Thanks Hagisbasheruk
Click to expand...
Click to collapse
This is also my 1st post here. But I'd been monitoring the xda-developer forums for a long time. I spend more time reviewing posts rather than posting in forums. Anyways I think I can help. Here's the answer to your question: http://wiki.xda-developers.com/index.php?pagename=HimalayaBootloaderSdCardFlashing. You can also use the search function provided by this website to search for topics that you need.
Thanks for the link which lead me to bootloader info below
"you can connect to the bootloader, either via a serial cable, and use a terminal program like hyperterm. or via usb, and use mtty. make sure you have disabled the serial or usb connection in activesync, before trying to connect to the bootloader."
So i am guessing its both USB CABLE or USB CRADLE got i just purchase one on Amazon for 90 pence
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
g_spot said:
i tried to bootload my xda and it keeps bringing me to the windows mobile screen with no serial words on top...
i have a o2 xda mini that runs WM2003 SE and would like to upgrade with the WM6.. is it possible??
can someone please help
thanks
Click to expand...
Click to collapse
here are the XDA mini s WM6 pages http://forum.xda-developers.com/forumdisplay.php?f=356
*this is a copy, it is not my work at all* just thought it would be helpful as it helped me restore my bootloader.
Your device is bricked, if and only if, your device won't start normally... even if you press soft-reset, hard-reset, or even bootloader mode buttons. Usually a brick is caused by improper ROM upgrade, and using tools that modify the ROM. Before panicking, do the following:
Brick Test:
Make sure your device has ample battery charge. If you're not sure plug it in with the wall charger for at least 10min
Remove your battery for at least 1 minute
Replace your battery while observing the LED lights
If the LED blinks once upon battery insertion, you might have hope yet
The only way to upgrade on a semi-brick device, is to upgrade through bootloader mode. No bootloader mode, No upgrade possible - period.
Entering Bootloader Mode on Semi-Brick Atom:
Remove battery for for at least 1 minute
Press CAMERA+RESET(stylus) simultaneously
Insert battery while still holding the buttons
Release the buttons at the same time (You should see bootloader screen)
Note: Failure to hold the buttons at the same time during battery insertion will cause it not to work
Manual to restore dead BootLoader (http://wiki.xda-developers.com/index.php?pagename=BootLoader) Rover G5, Orsio n725, O2 Atom, O2 Atom Exec, HP6815 - Tested . (may be 68xx series)
© Copyright to Alex_Beda & 1stMASTER
PDA-HACK.NET Team http://wiki.xda-developers.com/themes/default/images/http.pnghttp://pda-hack.net (http://pda-hack.net/)
If our article has helped you, you can donate the Web Money
WMID 378286389551
for WMZ: Z396747110007
for WME: E114645323227
for WMR: R351032339900
Thanks to all who helped.
Thanks to Winterice for the technical assistance and moral support.
Thanks to ant 125 for useful information
Thanks to Allbest, deniska.75, Borozavr, Erke for moral support.
Symptoms:
The device is not switching on, not entering bootloader.
(most often after the firmware from a memory card)
React to connect charger.
if the battery insert and connect charger, it orage led must be lit .
if the battery remove and connect charger, it orange led must be flashing.
There is only one way for restore bootloader.
Reflashing flash memory in the PXA272 using JTAG.
This procedure consists of two parts.
Hardware (making cable for reflashing) and software (reflashing).
Hardware part:
This pinouts JTAG of Atom Exec, Rover G5, Orsio n725, O2 Atom, O2 Atom Exec
At O2 Atom (not Exec) is the only internal contacts. Located near the Camera button.
http://i218.photobucket.com/albums/cc23/alex_beda/JTAGroverorsio.jpg
There are contacts inside the device, near the buttons CAMERA,
for access them, you need to open device.
There are contacts from the outside, near the SIM connector.
All contacts is working
For inside contacts need this connector
http://i218.photobucket.com/albums/cc23/alex_beda/raz012.jpg
You can so using connector from floppy drive 5.25”. (autor vic180)
http://i218.photobucket.com/albums/cc23/alex_beda/PICT0267-.jpg
http://i218.photobucket.com/albums/cc23/alex_beda/PICT0262-.jpg
LPT connector for PC
http://i218.photobucket.com/albums/cc23/alex_beda/LPT1.jpg
Cable length of a 35-40 sm
This connector for outside contacts
Result connector from connector for floppy drive 5.25"
http://i218.photobucket.com/albums/cc23/alex_beda/raz1.jpg
http://i218.photobucket.com/albums/cc23/alex_beda/raz3.jpg
http://i218.photobucket.com/albums/cc23/alex_beda/vid2.jpg
.
for fixation connector need make this
Or other
http://i218.photobucket.com/albums/cc23/alex_beda/kreplenie.jpg
http://i218.photobucket.com/albums/cc23/alex_beda/vidkrepl.jpg
http://i218.photobucket.com/albums/cc23/alex_beda/vidobsh.jpg
Software part.
http://wiki.xda-developers.com/them...a-developers.com/uploads/RepairBootLoader.zip (http://wiki.xda-developers.com/uploads/RepairBootLoader.zip)
In attached file is the programm JFlashmm,
in the same directory BOOTLOADER from ÀÒÎÌ ÅÕÅÑ (ebo_a.nb0)
from First Firmware,
and driver the giveio needed for working cable.
If you have O2 Atom (not ÅÕÅÑ), it must be in the folder jflash_mm
Deleted file ebo_a.nb0, copyng the fileeboot.nb0 from O2 Atom firmware in the jflash_mm folder
and renaming this file in ebo_a.nb0.
Before connecting LPT connector , you want to press and hold
micro button near to the sim connector.
http://i218.photobucket.com/albums/cc23/alex_beda/knopka.jpg
For example: sticker on the button.
Ground from LPT connector, connecting on ground the device
(using the crocodile connector)
http://i218.photobucket.com/albums/cc23/alex_beda/ground.jpg
Connect cable to LPT port of PC.
Connect charge to the device
Orange LED is blinking.
If LED not blinking,
Check pressed the micro button.
check fixation the button.
Installing the driver giveio from attached file.
Now you can restore BootLoader (http://wiki.xda-developers.com/index.php?pagename=BootLoader).
BootLoader (http://wiki.xda-developers.com/index.php?pagename=BootLoader) needs to be restored in two places.
Need boot flashing to adress 0 and address 3f400.
In folder jflash_mm there is a file start.bat.
Inside this file:
jflashmm pxa27x32 ebo_a.nb0 P 0 PAR
jflashmm pxa27x32 ebo_a.nb0 P 3F40000 PAR
So file ebo_a.nb0 (boot from àòîì exec) will be flashing in two places,
To adress 0 and adress 3f40000, data send to parallel port.
Execute start.bat, if all right , you correct making cable,
it must detect processor.
If message screen on "file *.DAT not find", press Soft Reset.
the program will ask you «bla-bla-bla» Y/N? Press Y
JFLASH Version 5.01.007
COPYRIGHT (C) 2000 - 2003 Intel Corporation
PLATFORM SELECTION Processor= PXA27x
Development System= Mainstone
Data Version= 1.00.002
PXA27x revision ??
Found flash type: 28F256L18B
Unlocking block at address 0
Erasing block at address 0
Unlocking block at address 10000
Erasing block at address 10000
Unlocking block at address 20000
Erasing block at address 20000
Unlocking block at address 30000
Erasing block at address 30000
Unlocking block at address 40000
Erasing block at address 40000
Starting programming
Using BUFFER programming mode...
Writing flash at hex address 3fe80, 99.85% done
Programming done
Starting Verify
Verifying flash at hex address 3ff68, 99.94% done
Verification successful!
So too for the second time in firmware to address 3f4000
You can disconnect charger and cable.
Enter bootloader :
Press Camera button, insert battery and press Soft Reset.
If everything was done correctly, it bootloader is running!!!
Now, as usual (almost)
Connect the device to PC.
Run update firmware for you device.
Must go update firmware.
If all right, it .......
Operation system update, bootloader update,
Running update ExtROM (http://wiki.xda-developers.com/index.php?pagename=ExtROM), but, it should freezes at 6 %!!!!
Disconnect usb cable from device, Enter Hard Reset!!!
Device must switch on, calibrating touch screen etc.
Run again update firmware for you device
I bricked my Xda Atom Pure which i bought second-hand yesterday by trying to hard reset it to clear the memory.
It got stuck at bootloader screen while folowing the above procedure and my pc would not recognise it. I choose option 1; Module debugging mode, pls where do i go from here? its too late to loose this phone. pls help!!!
plz help!!!
Plz help me i My o2 atom dead cannot enter in Bootloader too...plz help!!!
video
can u send a video how to do all thiss or tell step by step plz
i have the same problem can not enter to boatloder mode(tried everything)
i m frm india here we didnt have o2 atom exec. customer care.
plz need help???????/
this methode can be applied on htc magician???
this methode, can be applied on htc magician??? the bootloader is the same?
There is a procedure for Trinity device ?
There is a similar procedure for recover crash bootloader on trinity device ?
When i enter on Bootloader mode (Power+Camera+Reset-stylus) only led blue blink on my test trinity device.
Thanks in advance for your help.
need help
pls,,,my atom is dead, coz when i upgrade is fail,,,show pls the vidio,,,so i can try at my atom
me too
cant bootloader,i try any way but cant..............
Hi All, I am trying restore dead bootloader on my 02 Atom.
have followed all the hardware set up instructions but I can only get to the point of the blinking LED with no response from the software.
Maybe I have misunderstood the English in the instructions. Would really appreciate if some good soul could give me a better translation.
Look forward to a response, many thanks in advance.
psophan said:
cant bootloader,i try any way but cant..............
Click to expand...
Click to collapse
What no lettering on the screen like -->>> V1.0, USB, or SERIAL ..? if you still look like that , it means your device is saved !!!! I also never experienced anything like that and my O2 can live up to this moment ...!!
thank friend
Hakim Rahman said:
What no lettering on the screen like -->>> V1.0, USB, or SERIAL ..? if you still look like that , it means your device is saved !!!! I also never experienced anything like that and my O2 can live up to this moment ...!!
Click to expand...
Click to collapse
But im sucess already
you're welcome
psophan said:
But im sucess already
Click to expand...
Click to collapse
justify still be saved !
this tutor only for PC Desktop user ha?
Possible make JTAG VIA USB? can u tell me how to?