Hi everybody!
I want to upgrade my SPV C500(Orange) to WM6 but it not applications unlocked.
How can i do it without Orange method or SPV-Services?
Can i get a similar application to SPV-services for application unlock my smartphone?
the SDA unlock can not work?
Follow these instructions: http://spod.cx/blog/unlocking_orange_spv_c500.shtml
Basically, download the linked registry editor and change these keys to application unlock:
Code:
In: HKLM/Security/Policies/Policies
Change 00001001 from current value to 1
Change 00001005 from current value to 40
To do the sim unlock, you have to use SPV service or the other tool Karhoe linked to.
Related
Hello all,
I'm new here and hoping someone has some idea of what I'm doing wrong!I've Been looking for a solution for ages and now I am stumped! I've been reading abot all the success with lokiwiz- but I don't seem to getting any!
I have the T mobile MDA Vario UK version. I want to unlock the sim. Using lokiwiz 3a I get this error -
--------------------------------------------------------------------------
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
InitializingThe system cannot find the path specified.
.The system cannot find the path specified.
.The system cannot find the path specified.
...........The system cannot find the path specified.
..........Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
The system cannot find the path specified.
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
The system cannot find the path specified.
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
--------------------------------------------------------------------------
"The system cannot find the path specified." .....Why not? Active Sync is synced as I copied and pasted stuff back and forth. Also with lokiwiz 2b the MS dos window just closes after I type in 'U' for unlock.
One error that keeps popping up when I connect the Vario to the pc is -
"Pocket PC Networking-
Unable to obtain a server asigned IP address. Try again later or enter an IP address in Network Setting"
I click 'OK' and the error goes, but I can still sync my calendat, contacts etc etc and install programmes from PC to Vario.
Could this have anything to do with why lokiwiz is refusing!
ANy ideas anyone?
Cheers people!
use version 3
Hi there and cheers for the reply!
Version 3 worked - the only thing is the code that came out doesn't seem to want to unlock the phone. I put my friends O2 chip in and put the code in as quoted below- refused to unlock. Instead of 'SIMLock Code' should it say 'SIM UNLock Code'?
--------------------------------------------------------------------------
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\Administrator\My Documents\Paras\lokiwiz\Lokiw
iz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0100000000000000
SIMLock Code: 45711237
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Ok call me stooooopid!!!
It works - I left the phone connected to PC after inserting an O2 chip and the screen that asks for the network code was different! I entered the code and it all works!
hmmm
will it work with my spv m3000 AKU2 ROM2.22 ????
please help, I'm trying to unlock my PDA like for 3 days now...
I've just looked at -
http://forum.xda-developers.com/archive/index.php/t-249474.html
Theres a guy called 'guestman' and it worked for him on the spv m3000 .
What error do you get- I'm no Expert though !
The two things I was doing wrong- Didn't have the phone connected to the computer after putting in another operators chip. ALSO when using winzip for unzipping the files, I was dragging and dropping them into a folder I created called 'lokiwiz'....DO NOT do this- use extract on Winzip.
Good luck!
success
Dudson said:
will it work with my spv m3000 AKU2 ROM2.22 ????
please help, I'm trying to unlock my PDA like for 3 days now...
Click to expand...
Click to collapse
unlocked mda from t-mobile worked like a wizard!!!!!!!!!!
Hi
I recently bought a C500. It turned out to have been bought over Ebay from a previous owner.
The problem is that the phone is sim-locked. Is it possible to unlock the phone without having an Orange sim?
The main problem is that i live in Denmark and I have no idea of where to get hold of an Orange sim.
So is it possible to remove the simlock without actually having an Orange sim in the phone?
Thanks!
Unlocking of Typhoon, Hurricane and Tornado is for free: use the tools linked from here: http://www.mediafire.com/?tzx4f489w8qlmwf
1.) application unlock the operating system (first folder tools)
2.) start lokiwiz in the second folder and select "S" for SIM Unlock
3.) the device will prompt for a confirmation to load itsutils.dll, confirm that
Action continues, device restarts and is SIM Unlocked.
Hi folks, i'm trying to upgrade my C500 to WM6 but am failing at using the SPV-Services superCID as the website seems to be down. Is there an alternative way to superCID my C500?
Ahh, found some instructions here:
http://www.geocities.com/gggbitonti/typhoon.htm
that doesn't need the SPV-Services program
TyphoonNBFTools in crash
TyphoonNBFTools crash! Give me an error (debug of windows). no solution ?
trying to unlock c550
Im trying to unlock a spv c550 but having trouble with the last part, I can get the cert cab installed but cannot unlock.
The bootloader is hurricane not typhoon can someone help please.
Cheers
Fermec
the C550 isn't a typhoon it's a huricane, you are better off asking the question in the huricane forum
GordonCopestake said:
Hi folks, i'm trying to upgrade my C500 to WM6 but am failing at using the SPV-Services superCID as the website seems to be down. Is there an alternative way to superCID my C500?
Click to expand...
Click to collapse
The service should be back up now.
Hi ,
Mates , it's still Down !!
any Ideas ?alternative ones :S . .
Please help . .
On Kar-Hoe pages in tutorial is second alternative how to unlock your Typhoon, look link:
http://karhoe.net/content/view/35/1/
* If you cannot use SPV-Developers SuperCID tools, download this tool and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
erik.aragorn said:
On Kar-Hoe pages in tutorial is second alternative how to unlock your Typhoon, look link:
http://karhoe.net/content/view/35/1/
* If you cannot use SPV-Developers SuperCID tools, download this tool and use the alternative method. Then do the following.
- Keep your Tornado connected to ActiveSync.
- Extract it with WinRAR etc.
- Open the Lokiwiz.exe
- When you opend the Lokiwiz.exe you will get a black DOS screen with 4 options:
U. Unlock
L. Lock
C. Cid Unlock (SuperCID)
Q. Quit
Click to expand...
Click to collapse
Sim lock remove ?
My spv C 500 is very very bad
the cidlock can t unlock
i use le SPV Services by http://www.user.cityline.ru/~ronswens/tutwm2003.html
and my explorer of pc bug
i use the lokowiz system
and my spv c500 tell me : this program is not installed because it s not signed
My SPV C500 configuration :
ROM original ORANGE france
Noelch said:
My spv C 500 is very very bad
the cidlock can t unlock
i use le SPV Services by http://www.user.cityline.ru/~ronswens/tutwm2003.html
and my explorer of pc bug
i use the lokowiz system
and my spv c500 tell me : this program is not installed because it s not signed
My SPV C500 configuration :
ROM original ORANGE france
Click to expand...
Click to collapse
Try SDA Application Unlock
Are you stucked by SIMLock.exe program?
Have you modified the registry keys (using regedit STG)
in HKLM/Security/Policies/Policies
Modify value 00001001 to 1
Modify value 00001005 to 40
Install cert.cab on the device and run it
Now you should be able to remove locks using SPVServices.exe
If SIMLock blocks you, I had the same problem. I remotely killed SIMLock.exe and after I had access to the phone and was able to use regeditSTG and then install cert.cab. Everything was fine after I killed the SIMLock.exe process (using visual studio remote tools and pushing the soft button to allow the program to run (do it many many times to be sure that the SIMLock screen does not recover the program allow message)) and gained access to the phone.
Good luck
how to unlock spv c500 for free????
Download this zip: http://www.mediafire.com/?4y1fo5yixknb6n6 then run steps 1 + 2 - also search my kitchen threads on the handling of lokiwiz tooling (this does the unlock job).
What kind of "unlock" do you need - btw?