Database Users

MachinaGod RAPI Unlocker - certificate disable on WM5 v0.1

Hi,
Just an util I got together in no time.
Rapi Enabler, certificate disabler.
Enable all the security on your Windows Mobile 5 phone.
Credits to the author of the ce remote tools.
Instructions:
1. Download the attached file (you have to be logged into xda-dev);
2. Extract it somewhere in your computer
3. Connect your phone via activesync
4. Run the EnableRapi.bat (on your computer)
5. Done.
Have fun,
Ricardo

How does it differ from this CAB file I pulled off the HTC Apache?
I use this in my Extended ROM so that I can run unsigned applications, CAB files, and CPF files during the initialization procedure after a hard reset.

Hi BTT,
This is based on that exact cab. The only difference in enabling RAPI calls also, and doing it without needing user interaction, only needing a activesync connection.
Is a little utility I use for integration into batch files.
Bye,
Ricardo

Certificate disabler..
Probably a dumb question, but is it a replacement fort certchk on 2003 devices? Still looking for such a program.
Thx

Thanks Machinegod, this worked well. I used it on an XDA exec will it work with all WM5 devices?

Hi Machinagod
Is there a way i can call your routine from code?
I have developed software for WM5 but cannot access the database with the standard MS settings. I would like to give my users the option to unlock the rapi calls and install automatically.
Thanks in advance
Steve

ronaldovic said:
Certificate disabler..
Probably a dumb question, but is it a replacement fort certchk on 2003 devices? Still looking for such a program.
Thx
Click to expand...
Click to collapse
to ronaldovic: I believe this utility is for disabling signed applications so you can install apps that have not been signed. I have used BTT cert cab in my extended rom since he posted it (Thanks BTT, It has been very usefull)
If you are looking for disable cert check so you can activesync with MS exchange without a a SSL . Certificate connection, Micro$oft still offers a download to disable the cert sync check..
see http://www.microsoft.com/downloads/...b8-8b3a-4f1d-8e94-530a67614df1&displaylang=en

Miracle Registry
i checked many registry of "Security policies" in different device, and also SDK.
http://asukal.seesaa.net/article/12583144.html
You can understand how change it for your neccesity.
this was for your refference.
and also i got made one registry file which has many "Certificate Sotre"
from different setting devicees and CABs and SDK Emu.
This registry make your device to enable working many kinds of dll and exe or any other files without digital signed(not for all)
multi user interface files also can effect without digital signatures.
(shellress still can not, but worked with Smartphone signature)
The security revel will be same or lower than SDK emu.
but not completely finish to edit it.
so possibility of some side-effect or unkown problem.
Hope understand this point and use it as test.
But once you use this registry, you got understand why i said it miracle.
just import this registry and make soft reset.
"syntac error" displayed when you import this, but works.i will cheking the reason of this error.
lets test it.

Re: MachinaGod RAPI Unlocker - certificate disable on WM5 v0
I try to use it on my new Jamin but nothing happen.... Prog still not work.
Pls I'm a newbe, Can you help me ?
Thanks a l ot

Hi MachinaGod,
Could you tell me please what exactly this RAPI unclocker is doing? Is it possible to undo it? RAPI locker or something? Is there any security threat after you execute tis program?
Thank you!

cingular
please tell me what tool can unlock (simlock) my cingular 8525, Thank you very much!

hmmmmmmmmytfghvghdgfgfdtrsdr

unlocking spv m1500
hello,
i tried the RAPI unlocker but it did not work,
could it be because my Pocket pc is running 2003 CE?

hi
someone can send me the file i can download him pls
and one qwuestion this unlock mi simlock???

htc 8125 need help please
machinagod said:
Hi,
Just an util I got together in no time.
Rapi Enabler, certificate disabler.
Enable all the security on your Windows Mobile 5 phone.
Credits to the author of the ce remote tools.
Instructions:
1. Download the attached file (you have to be logged into xda-dev);
2. Extract it somewhere in your computer
3. Connect your phone via activesync
4. Run the EnableRapi.bat (on your computer)
5. Done.
Have fun,
Ricardo
Click to expand...
Click to collapse
i have a htc 8125 and tried your method and it never gave me a code but when i put my sim card in it says sim lock and unlock? explain how to unlock this d$$m phone.It is a cingular phone but i dont have that service.it is version 2.25
[email protected]

lokiwizMSL 0.3 - Lokiwiz's Back, now working with SPL 2.x

Hello to all.
First:
I will NOT be held responsible for any problems caused by this tool.
I'm releasing the 0.1 version of the Wizard Unlocker. It's similar to the imei-check.co.uk unlocker (it patches the same bit), however it doesn't cost you £20 per bit :wink: .
Version 0.2: New CID unlocking abitity
Credits for the 0.2 version go to SPV-Developers, namely: itsme, Arc and Arisme...
Version 0.2a: CID unlocking abitity FIXED
Credits for the 0.2a version go to Chan, who took care of the errors I managed to punch in the script when I packed it the first time... Thanks!
Version 0.2b: SIMlock abitity FIXED
Credits for the 0.2b version go to kpcomp, who found the missing GOTO End instruction after a SIMlock... Thanks!
Version 0.3: SIMLock ability redone for all SPLs
Credits go to Buzz_lightyear (Go buzz) for pointing out the obvious.
Now version 0.3a: Minor update, corrected Rapi unlocking
Credits go to everyone that reported problems in the forum
I can't stress enough that this work is heavily base upon the itsme tools, so my thanks to him. Also, spv-developers and xda-developers boards were an invaluable resource.
I would also like to thank all the people that supplied their phone info in this thread: http://forum.xda-developers.com/viewtopic.php?t=33479
Ok, now the instructions...
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Guarantee that your phone is connected via ActiveSync with the computer
3 - Execute lokiwizMSL.bat (on your computer! My inbox is filled with this kind of error)
4 - It will give you the SIM unlock code after it runs, just get a different SIM from the one your phone is locked to and insert the code...
5 - Have fun...
Frequently Asked Questions:
Q - Will it hard-reset my device?
A - No. It will do a soft reset at the end of the process for applying the changes
Q - I locked my device and now it shows only the SIMlock window
A - Get your phone showing the SIMlock window. Connect it via ActiveSync. Use the tool to get your unlock code
Q - How about the CID unlock tool? (for using any type of roms)
A - Doesn't work yet... Stay tuned
Q - I'm having problems with Unlocker not connecting to the phone
A - Disable all kinds of Antivirus, Firewalls and similar applications before running Lokiwiz.
Bye to all,
Ricardo Afonso
afonso (dot) ricardo (at) gmail (dot) com
PS: If you like it... send me a mail... :wink:

It doesn't look like this has worked on my Prophet. (Orange UK M600 with latest Dopod ROM).
It looks like the auto install of "EnableRapi.cab" did not work.
I ran "LokiwizMsl.bat" 3 times, with no SIM, with the Orange SIM (it is SIM locked to Orange) and with a VirginMobile SIM. Also closing ActiveSync each time on the PC. Re-started the PC after the second try as well!
I think on the second try of running "LokiwizMsl.bat" the phone asked if I wanted to install "EnableRapi.cab" I selected "Yes" but it still went the same as the other times.
This is what was displayed on the PC -
********************************************************
C:\Lokiwiz03>lokiwizmsl
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Lokiwiz03\Utils\itsutils.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
opening: lock_backup.bin: No such file or directory
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
********************************************************
I installed the "EnableRapi.cab" manually and deleted all the first part of the "LokiwizMsl.bat" file so the file contained just -
*******************************************************
ECHO RAPI Unlocked.
ECHO Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT
ENDS
ECHO
Utils\pdocread.exe -n 1 0x000000 0x10000 -b 0x4000 lock_backup.bin
ECHO
ECHO
ECHO SIMLock Code is your code... Type it with another SIM in...
ECHO --------------------
Utils\lokiwizMsl.exe lock_backup.bin
ECHO --------------------
ECHO "Standing on the shoulder of giants"
ECHO Ricardo Afonso, 2005
SET Choice=
SET /P Choice=Press Any key to Exit.
********************************************************
Running the above cut down version of "LokiwizMsl.bat" the PC displayed -
********************************************************
C:\Lokiwiz03>lokiwizmsl
C:\Lokiwiz03>ECHO RAPI Unlocked.
RAPI Unlocked.
C:\Lokiwiz03>ECHO Starting MSL work... DO NOT DISCONNECT UNTIL
THIS SCRIPT ENDS
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>Utils\pdocread.exe -n 1 0x000000 0x10000 -b 0x4000
lock_backup.bin
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>ECHO
ECHO is on.
C:\Lokiwiz03>ECHO SIMLock Code is your code... Type it with another
SIM in...
SIMLock Code is your code... Type it with another SIM in...
C:\Lokiwiz03>ECHO ----------------------------------------
C:\Lokiwiz03>Utils\lokiwizMsl.exe lock_backup.bin
Lock Status: 0500000000000000
SIMLock Code: 4810**** (was 8 numbers)
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
C:\Lokiwiz03>ECHO ----------------------------------------
C:\Lokiwiz03>ECHO "Standing on the shoulder of giants"
"Standing on the shoulder of giants"
C:\Lokiwiz03>ECHO Ricardo Afonso, 2005
Ricardo Afonso, 2005
C:\Lokiwiz03>SET Choice=
C:\Lokiwiz03>SET /P Choice=Press Any key to Exit.
Press Any key to Exit.
C:\Lokiwiz03>
********************************************************
With the VirginMobile SIM, it was saying something like You have had 1 incorrect try wait to enter SIM unlock code.
When the screen changed to allow me to enter the code, I entered the 8 number code from the PC screen. Checked the number on the phone against the number on the PC about 10 times then pressed "Unlock" on the phone.
It now says
"Service Provider is locked
Please input unlock code."
I'm not sure if I should enter the same number again or if that would be my last of 3 chances to enter the unlock code...
I'm not sure if this is asking for the number that Lokiwiz03 has provided as it now doesn't say anything about having had 2 previous tries! (Which I have - I once entered a code that was on the screen when Lokiwiz02 failed with the ITWrite Disk Error).
What should I do?
Alan

Just want to clarify that I did wait for ActiveSync to connect each time before running the batch file on the PC!

After seeing robincop's post on another thread about Lokiwiz03 I tried runing the full origonal Lokiwiz03 version of the "LokiwizMsl.bat" on the PC after having previously manually installed "EnableRapi.cab" on the Prophet. (Orange UK M600).
It ran without any errors and gave THE SAME 8 digit SIM unlock code as before.
I had run this without re-starting the phone so it was still asking for the Service Provider Unlock Code for the second time. I had previously entered THE SAME CODE when it asked for it at power-up with the VirginMobile SIM in it.
This time it WORKED
Many thanks and MUCH RESPECT to MACHINAGOD.
I'm now using a dual SIM with Virgin(T-Mobile) and Tesco(O2) SIMs in it.
Anyone know how to get a Prophet to display on the Today screen which network it is on?

WiVit SIM Status Switcher is what you need.
But unfortunately it doesn't work "out-of-the-box" with WM5.
You should search this forum, there are some threads with solutions to get this program work on WM5 (until the developer releases a WM5 version).

I runned Lokiwiz03 the way it is described in robincop's post and it worked (thanx machinagod and robincop!). I just wat to clarify those who are confused about entering the codes. So this is the way to do it:
1 - After running Lokiwiz03 (see robincop's post) turn off the phone and turn it on again.
2 - when it asks your pin code enter your normal pin.
3 - it then asks you for the Service Provider Unlock Code: It is here that you insert the sim unlock code obtained with lokiwiz.
Hope this can be helpful!

I ran this on my MDA..seemed fine on the computer screen, everything came back & it gave me a code..however I've soft-rebooted my MDA about 5x now and don't see a screen to enter the code. It goes from the password/PIN screen right to the today screen. I searched around on the phone for a utility to enter the code into but so far no luck. Do I have to put in another provider's SIM card before I can get the 'unlock prompt'?

benenglish said:
I ran this on my MDA..seemed fine on the computer screen, everything came back & it gave me a code..however I've soft-rebooted my MDA about 5x now and don't see a screen to enter the code. It goes from the password/PIN screen right to the today screen. I searched around on the phone for a utility to enter the code into but so far no luck. Do I have to put in another provider's SIM card before I can get the 'unlock prompt'?
Click to expand...
Click to collapse
Ya the phone does not know that anything needs to be done till you put a 2nd sim card in. Then it sees that it is locked and will give you the screen to enter the code.

machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ∩X à`e\!±Φ"‼-ÄC
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
HELP!!?! What did I do wrong? I tried installing the CAB Files manually, but it did not help

That means your mobile phone is sim unlocked and doesn't need to be unlocked...
Bye

LOL. You are right. But I never unlocked it. It's brand new....
I thought o2 locked their XDA Mini S?
Anyway, should we expect to see CID Unlocking for SPL 2.xxx?
Thanks

I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo

but ROMUpdateUtility_noid(Ver:2.5.2) don't support the Prophet ROM that cooked by typho5.exe(Ver:1.0.0.0) and nb2nbf_tornado(Ver:2.2.0.0)

machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Thanks for your work, but CID unlocking is important for the prophet users because we are only able to upgrade, not downgrade. So if someone installs the latest version of Dopod ROM and wants to go back to an iMate ROM, it is not possible.
Thanks for your efforts

Two things:
I've said it 2 times already, this is the last.
The only part of the ROM upgrade that is protected against downgrade is the SPL and the IPL. The rest is unprotected. A specially cooked rom should do it...
2nd:
The ROM updater I attach to this message should work with the cooked roms.
Bye,
Ricardo

andrew_sh said:
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Thanks for your work, but CID unlocking is important for the prophet users because we are only able to upgrade, not downgrade. So if someone installs the latest version of Dopod ROM and wants to go back to an iMate ROM, it is not possible.
Thanks for your efforts
Click to expand...
Click to collapse
Hmm, with the modified ROMUpdateUtility.exe to ignor the vendor, can't you downgrade too??
machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Hmm, but are you going to try to finish the CID unlocking ?? Your tool is great cause one can return to a previous CID state.

You are the man!
It's work perfectly sim unlocked on a Cingular 8125, I can now use T-mobile or oversea sim card with it. Thank you so much!!!!!!!!!!

machinagod said:
I have a solution for the CID unlocking... But I've toasted 2 devices with it already... So I'm not releasing it.
Another thing is that CID unlocking isn't really necessary. The only case it really is important is the SPL changing, and most of the cooked ROM's don't need a new SPL.
Bye,
Ricardo
Click to expand...
Click to collapse
Howdy machinagod - I've got access to a AKU2.2 device and need to dump the IPL and SPL. (already grabbed the OS, radio, and ext ROM with awizard). Any advice you can give me on getting the IPL/SPL dumped? It's CID locked and r2sd gives a perm error.
Gracias amigo!

machinagod said:
A specially cooked rom should do it...
Click to expand...
Click to collapse
Look here http://forum.xda-developers.com/viewtopic.php?t=48965
Noone knows how to cook a rom for this puprose.
I have had experience cooking roms with your tools but I need some pointers.
Do I have to change only the headers? Do I have to delete the bootloader from the nk.nbf?
Thanks
Andrew

I have big problem with MDA vario Tmobile Slovak. I can not unlock it. I used lokiwiz 2a, lokiviz 3b but still no succes. I downgraded the room to CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE, and other rooms too, but after starting lokwiz, program is waiting (i do not know for what)
www.foony.mscnet.sk/vario.jpg
www.foony.mscnet.sk/vario1.jpg
how long does it take the unlock process?
any advice please to unlock it?
I have active sync 42.
thanks

Erroneous SIMLock Code with Lokiwiz

Hello there,
First, thx for the work done on Lokiwiz. I just unsimlocked my Qtek 9100 with ease and very fast. I used Lokiwiz 3.0a and Microsoft ActiveSync 4.2 it gave me the SimLock Code and everything worked perfectly.
I tryed to do the same on my Qtek S200, same tools, same method. But, the DOS windows of Lokiwiz gave me that as SIMLock Code :
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
Commande ECHO désactivée.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
Commande ECHO désactivée.
CopyTFFSToFile(0x0, 0x10000, lock_backup.bin)
Commande ECHO désactivée.
Commande ECHO désactivée.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: wûå?Òç█»7è¶G#═C
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.
Click to expand...
Click to collapse
Why its not a regular SIMLock Code with numbers like for my Qtek 9100 ? What I did wrong or how can I transforme that Code into something I can actually enter on my Prophet Qtek ?
thx
Cheers
Roy-B

Up !
Is my question already treated in one another post ?
Or its a noob question ? Or no answers yet for that kind of problem ?
Plz help
thx
Roy-B

its called search and read...
Of course it has been answered a hundred times. If you would have followed the original thread where you got the idea to use lokiwiz from, you would have found out, that when you get only zeros for lock status, it means that your phone is not locked. Also there are few more reasons for that. That, you would have to research and read it for your self just like everybody else.

Thx anyway
Thx for that answer, even if obviously you were too smart and too bored to post that.
Again, sorry to waste some precious seconds of your time to help me.
Roy-B

I have the same problem BUT the Lock Statut begins by : 01000 ....
Can you give me the like where you solve this error ?
Thanks !!!!!!!!!!!!!!!!!!!!!!!

Doesn't work for me....

I've been trying to unlock my K-jam with not much of a success, do you think it might be due to the reason i'm using an Hebrew OS on my Jam???
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\User3\Desktop\Lokiwiz03\Lokiwiz03\Utils\itsuti
ls.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ²⌂┼h~¶█Lןσ╔¶עó│`
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.

Doesn't work for me....

I've been trying to unlock my K-jam with not much of a success, do you think it might be due to the reason i'm using an Hebrew OS on my Jam???
machinagod's HTC Wizard/Prophet/Charmer MSL Revealer v0.3
NOW WITHOUT CID Unlocking POWER!
ECHO is off.
Supports SPL 2.x!!
--------------------
WARNING: This tool is highly experimental!
I will NOT be held responsible for any problems caused by this tool.
--------------------
Thanks to xda-developers, spv-developers, and especially itsme by the work they
released. This solution would not be possible without them.
--------------------
Unlocking RAPI Please wait...
MachinaGod RapiUnlocker v1.0
Initializing.......................Done!
RAPI Unlocked.
Starting MSL work... DO NOT DISCONNECT UNTIL THIS SCRIPT ENDS
ECHO is off.
Copying C:\Documents and Settings\User3\Desktop\Lokiwiz03\Lokiwiz03\Utils\itsuti
ls.dll to WCE:\windows\itsutils.dll
Could not update itsutils.dll to the current version, maybe it is inuse?
try restarting your device, or restart activesync
ECHO is off.
ECHO is off.
SIMLock Code is your code... Type it with another SIM in...
--------------------
Lock Status: 0000000000000000
SIMLock Code: ²⌂┼h~¶█Lןσ╔¶עó│`
This exe file was created with the evaluation version of Perl2Exe.
For more information visit http://www.indigostar.com
(The full version does not display this message with a 2 second delay.)
...
--------------------
"Standing on the shoulder of giants"
Ricardo Afonso, 2005
Press Any key to Exit.

You will need to run EnableRapi.cab on your device first, before run LokiwizMsl.bat on your computer. Also the sim unlock tool that you will need is Lokiwiz 0.3b

You will need to run EnableRapi.cab on your device first, before run LokiwizMsl.bat on your computer. Also the sim unlock tool that you will need is Lokiwiz 0.3b
Click to expand...
Click to collapse
Whats Lokiwiz 0.3b???
Where do I find it?
I've tried to follow your instructions using the 0.3a version > NADA!!!
I received same: SIMLock Code: ²⌂┼h~¶█Lןσ╔¶עó│`

Don't I-Mate K-Jams come SIM unlocked from the factory?

Don't I-Mate K-Jams come SIM unlocked from the factory?
Click to expand...
Click to collapse
Not when you buy it from your mobile carrier, It only comes unlocked when you buy it without a cellular contract but then you need to pay it's full price.

Sorry for the incorrect information. It is actually Lokiwiz 0.3a