hi folks, thanks in advance ,
i bought a mda compact , an sucessfully unlocked it with software from your ftp...ty.... So i upgraded this morning to a MDA Compact II, model no. pm200 and tried to unlock with the same tool , and it says device not recognised pm200.
i know its running windows mobile 5, any help to free the simlock would be greatfully recieved , all the best , oblivious. :lol: :twisted:
UNLOCK MDA COMPACT II / HTC CHARMER / PM200
Hello,
go to http://forum.xda-developers.com/viewtopic.php?t=33796&highlight=lokiwiz
Download lokiwiz.zip - HTC Wizard Unlocker v0.1
VERSION 0.1 !!!!!
follow these instructions:
1 - Unzip lokiwiz.zip to somewhere in your computer
2 - Copy EnableRapi.cab to your Charmer / PM200
3 - Execute the EnableRapi.cab in your phone. Wait for it to finish
4 - Guarantee that your phone is connected via ActiveSync with the computer
5 - Execute lokiwiz.bat and follow the instructions on your screen...
I've just unlocked my MDA Compact II with it, and it works.
Regards.
UNLOCK MDA COMPACT II / HTC CHARMER / PM200
Just wanted to confirm that i've had sucess unlocking my mda compact II (htc charmer). Followed shoptillyadrop instuctions and they worked a treat. Thanks for help.
Only, one comment to your instuctions - line 2 you wrote wizard rather than charmer.
Thanks again.
Will the SIM Lock be restored after I have performed a hard reset?
Thanks
Nase
No,
the Phone will remain unlocked. If you want to re-lock your phone, the same tool will do the job.
Regards.
Thanks for your quick reply.
The procedure sounds very easy so I will give it a try this evening.
Thanks
Nase
You are talking about NETlock, not SIMlock for a specific number (Prepaid), right?
I want to buy a MDAc2 from T-Mobile but have to use it with o2.
melino said:
You are talking about NETlock, not SIMlock for a specific number (Prepaid), right?
I want to buy a MDAc2 from T-Mobile but have to use it with o2.
Click to expand...
Click to collapse
Yes that is what I would like to do.
I guess that the Unlocker will remove any lock. Am I right?
Thanks
Nase
unlock mda2
work fine for me thank you :lol: :lol: :lol: :lol: :lol:
Has someone successfully unlocked (sim & Net) the t-Mobile German Compact 2 with a Tool?
PM200 UNLOCK PROBLEMS
HAVE USED LOKIWIZ VERSION 1 ,WELL HAVE USED THEM ALL WITHOUT SUCCESS ITS DRIVING ME MAD PLEASE SOMEONE HELP
GET''AN ERROR OCCURRED MESSAGE
THANKS
I've done it without problem. You list out your procedure done to see if we can help.
Hello. I had problem with my Mda Compact II T-Mobile UK. After I input Pin ti told that: Data Crashed conntact Your Service. I went to imei-check.co.uk and payed 20 GBP and in 5 minutes my Mda Works as a new one. Its the best way to solve this problem and problem with simlock too. Best regards !!!
A lot of people have unlocked their Charmer with out any problem. And there are at least two (including myself) who has flashed the Charmer ROM as well. Good if you can list out your specification and procedure that you have used that messed up your Charmer.
Usually, when you have the error message "Data Crashed conntact Your Service Provider", it means that the IMEI area has been messed up. And, the only solution to this problem seem to be to go to the imei-check.co.uk
Hey guys.
I have just got a Tmobile MDA Compact 2.
I cannot unlock it though.
I have tried V0.1 and V0.2b.
When my simcard (O2) is in the phone, it just asks you to enter the unlock code, and won't let you access any menus.
So I remove the SIM, install the EnableRapi.cab and then insert the Sim card. And click lokiwiz.bat on the PC whilst Activesync is running, I select U (have tried C aswell on V0.2b) and it doesn't show any errors, the phone resets, but the lock is still present.
Does anyone have any ideas ???
Unlock not working on my Charmer
Hi Guys!
I have followed the instructions carefully und copied the file EnableRapi.cab to my charmer, executed it there, made sure that Charmer is connected via ActiveSync, opened the file lokiwiz.bat on my PC, and waited until Charmer rebooted!
After reboot I inserted my SIM Card and the Result was a window that asked me after typing in my PIN for a Network Code!
I have tried all the Versions on the Unlock page, none worked! I have deactivated my AntiVirus Programms and Firewalls!
My Charmer is (still) locked from T-Mobile Austria! All I receive on my PC in the same Folder is an Output File called "Unlocked" which I cannot open with a program on my PC!
Thank you very much in advance for your help as otherwise I have to unlock it via Internet and this would cost me 30 BP!
;-)
Vibe
lokiwiz probably wont work on AKU2 roms because the OS is more protected. check your versions, Windows Build 14847.2.0.0 is AKU2.
dave106 said:
lokiwiz probably wont work on AKU2 roms because the OS is more protected. check your versions, Windows Build 14847.2.0.0 is AKU2.
Click to expand...
Click to collapse
that's exactly my version too...
can you keep me updated if there is a version that can unlock this type ?
thx !
Look what abzee wrote on: http://forum.xda-developers.com/sho...ght=could+not+update+itsutils.dll#post1039958
it took me 5 minutes to remove the lock using his instructions.
Thanks to abzee and of course to machinagod.
I used Lokiwiz03 yesterday with my Charmer. The Charmer is the german MDA Compact II with T-Mobile Netlock. It takes only some minutes. It was very easy to use-no problems.
Great Work and a very great thank you!
hallo all together
i am using a mda compact ii for six weeks now
i unlocked the device by using lokiwiz 0.3a so i can use my vodafone card from work
now the card reader is gone to hell and i need to bring the mda compact ii to the t-mobile service
so how can i reactivate the netlock before getting the device serviced ???
i allready used the forum help but didn't find a good hint
thanks first
yergling
Well, it depends if you are a tidy person
If you haven't remove your lokiwiz directory, you should have the file 'lock_backup.bin' in the directory, that is approx 65K in size. You can use this file (with lokiwiz) to lock your phone back.
BTW, on the bright side, I don't think they will check your SIM lock. Ironically they asked you to send it back to Tmobile. For my case, they just asked to contact HTC directly.[/quote]
ok i am a tidy one
i have found the lock_backup.bin on hdd
in the utils folder of lokiwiz is only pdocread util - so how can i use the lock_backup to flash back to the phone ???
BTW i do not think either that they will check the simlock, but sure is sure ?!?
you should have the Lokiwiz.bat in your lokiwiz directory. You need to run the EnableRapi.cab in your phone, and then run lokiwiz. You will have a 'Lock' option when you run the lokiwiz.bat file. It will use the lock_backup.bin in the directory to lock your phone back. I've done that before.
the version i used only unlocks
i found one with lock function
worked great
problem solved
thanks
yergling
Hi,
I am using an unlocked T-Mobile MDA compact II in India.The phone is running fine except for a small problem.It sends out a message almost daily(may be when i replace my SIM card) which appears of type 'application' in my phone bill.I have also used the antivirus software on my phone but didnt detect any viruses.
In other phones , you have an option for ''Confirm SIM service actions'' , where it confirms with the message "Allow SIM card to send message'' when you insert your SIM card.However, this choice is not available here.
Is there any registry entry to be modified to change this setting ? or are there any other options available ?
Pls. help .thx in advance.
Hi,
I'v tried to run Lokwiz with "L" option but no result:
http://img95.imageshack.us/img95/3912/lockbx5.gif
In some part of lockig process I see comunicate (in Polish - from Windows I think): Internal error.
But the wizard is beeing rebooted.
Please, can You tell me what to do, to lock Wizard to Orange (as it was when I bought it).
Thanks,
Mikolaj
I have SPV M600, but when I insert other network simcard it appear SimLock
I explore this site but I didn't find any ulocker...
I already try HTC universal unlock and HTC hermes unlock 2 but it doesn't work.
Does anybody have an idea for this device can be unlock??
Thanks . . .
look on the wiki m8, just unlocked one today. copy the two cabs to the device and then run the batch file. Do all this without sim card in, and up pops the code - brill! Insert sim and it will ask for code twice - job done!
Thanks a lot Bro.....