How do I change the password for my Bletooth Headset, there is nothing in the Headset manual about this. Is their an app for the imate that once you have bonded the imate and the headset you can change the headset password??
The passcode of the headset is hardcoded into its firmware; you cannot change it.
By default, it should be 0000
I've run across 1234 as a passcode as well.
db
yeah it is 0000, I just wanted to know if it was possible to change it so my headset can only ever be used by me!
bt passcode
some of the ericsson models allow passcode change.
Related
I paired my bleutooth headset several times now. It connects allright but everytime I have to give the headset password . I thought pairing was needed only one time.
I hope somebody has an answer for me .
Hmm, perhaps an obvious question but how do you pair your device? What steps are you taking?
I had this problem once, every time I came into range of my carkit there was the bluetooth message a device was trying to pair and I had to give the password.
However once I removed the pair and did it again it worked properly...
Hello Raptor, thats exactly what happens.
I pair the first time the headset and the s200 by holding a button and then de s200 asks for the key, i klick finish and it works fine.
But nex time I want to use the headset whe recognizes the headset but asks for the key again.
Hmm.. that's kinda weird. Dunno if you can "reset" the headset in any way?
With my carkit the problem was (I think/guess) that the carkit remembered the pair with my s200, but since I upgraded the rom the s200 didn't know the carkit anymore. But since I used the same name etc on my s200 something might have gone wrong.
It could be however that when you try to pair with your headset and you have to enter the password a popup comes up saying a device is trying to pair with your s200. You have to ignore that popup and just pair from the bluetooth settings of the s200 (from where you started, not the popup).
At least that's what happened on the carkit lol Never had a problem with my headset though :/
So I did a reset on the carkit and removed the pair from the s200, then searched again for a bluetooth device on the s200, paired with password and then it worked properly.
Hello Raptor, I tried your option several times but the situation stays the same. But thx for your input.
Hmm.. does the headset have a password at all? Maybe you can leave the password entry empty? Although I'm afraid it wont.
But otherwise I hope someone else can help you with this :/
I'm speechless, this morning te headset connected without asking for the password.
Beats me, but i'm happy!
Greetings!
Guys, I can't connect my O2 Bluetooth clip with my XDA Atom. I already input the right passkey (0000), but it said "unable to connect, make sure your passkey is correct". How to resolve this problem ?? I tried using another passkey, but nothing happen.
probably you can try to reset yr bluetooth headset to it factory setting, this was what happened to me too and i tried a factory reset on my bluetooth headset and it was ok already.
i thinks for bluetooth clip u should use 8888 for password.not 0000.i hope it's right.cheers...
Yudha_krenz said:
i thinks for bluetooth clip u should use 8888 for password.not 0000.i hope it's right.cheers...
Click to expand...
Click to collapse
Just got XA-06 BT stereo handfree. the password is 0000 for sure.
If you can't connect it after a factory default reset, i suggest you to exchange one.
I can confirm that the working password is 0000
My experience on my Trinity: stereo audio streaming, call handling, and remote control work seamlessly (smoothest I've ever tried).
However, I have problem with its microphone. Seems it picked environment sounds more, rather than my own voice. Worst happened in noisy environment, people whom I talked to complained they hear my surroundings better than I speak. I've tried to positioned the receiver/mic in any ways possible, but not improve much.
How can I improve the mic sensitivity for this particular O2 XA-06?
Hi, i just bought a universal bluetooth headset but i cannot set up my phone to work with it. I turned my bluetooth function on and set my phone visible but i still cannot find the bluetooth headset. Does anyone know why?
You don't want the bluetooth headset to see the phone... you want the phone to see the headset... Setting the phone to visible is for other phones/computers to be able to see it...
By default, all you should need to do is...
1. Have your bluetooth set to "on" on your phone
2. Turn on the BT headset
3. Add new device
4. See headset and tap on it and then next
5. Pair it with 0000 or 1234
6. It should set it to heaset automatically
Sometimes just having the bluetooth headset on is not enough, you have to put it in discovery mode. (The headset manual should say how to do this)
Hi all,
Im trying to listen to the audio playback using my BT headset,but the music never comes to the BT headset, it starts playing at the speakers although x1 shows A2DP profile.
Bluetooth A2DP headset with X1
I am having a similar problem.
I have an I.Tech Clip Radio that is capable of A2DP. When I was adding the new device, leaving the pin blank, headset was added successfully with both headset and wireless stereo profiles. Then in the Bluetooth setting page, when I try to "Set as wiresless stereo", a message will show trying to add headset into device list, press yes it will request for passcode, and does not accept the correct default passcode "0000" while the "Next" is grey out if I leave the passcode blank. And of course the Windows Media Player is then playing thru the speaker not headset.
Anyone has any idea? Is it an incompatible issue or I was doing it wrong?
pzbell said:
I am having a similar problem.
I have an I.Tech Clip Radio that is capable of A2DP. When I was adding the new device, leaving the pin blank, headset was added successfully with both headset and wireless stereo profiles. Then in the Bluetooth setting page, when I try to "Set as wiresless stereo", a message will show trying to add headset into device list, press yes it will request for passcode, and does not accept the correct default passcode "0000" while the "Next" is grey out if I leave the passcode blank. And of course the Windows Media Player is then playing thru the speaker not headset.
Anyone has any idea? Is it an incompatible issue or I was doing it wrong?
Click to expand...
Click to collapse
I've had the same problem with my Jabra SP700, I'll toy with it tomorrow and see if I can find something.
I have a similar problem, bought a bluetooth headset at DX. It is connecting to the phone,
but as soon as I start a call it disconnectes by its own.
I have no idea whats wrong, somebody who can help me?
I think/hope I found the solution:
http://forum.xda-developers.com/showthread.php?t=471181
I have Bluetooth stereo headset not branded one. when i try to pair with other phones it prompts for passcode and able to key in "0000". Whereas when i try with my HD2, it doesnt prompt to key in passcode instead the phone generates passcode automatically.
Is there any tweak to make the phone to prompt to key in passcode manually. I tried to edit the registry and hardcode the passcode of headset to auto pair. It doesnt works.
HKEY_LOCAL_MACHINE\Software\WIDCOMM\BTConfig\AutoP air\IncludedExactNames\
Anyone can help?.....
the phone will pair with it successfully if your device supports easy pair (most motorola's do for example) I have an anchient motorola hs850 that the HD2 pairs with no issues at all and it never asks me for a passcode unless I am pairing to my laptop or desktop.
It doesnt prompt for passcode anymore.. It generate passcode automatically to verify with headset...