Hi all,
Im trying to listen to the audio playback using my BT headset,but the music never comes to the BT headset, it starts playing at the speakers although x1 shows A2DP profile.
Bluetooth A2DP headset with X1
I am having a similar problem.
I have an I.Tech Clip Radio that is capable of A2DP. When I was adding the new device, leaving the pin blank, headset was added successfully with both headset and wireless stereo profiles. Then in the Bluetooth setting page, when I try to "Set as wiresless stereo", a message will show trying to add headset into device list, press yes it will request for passcode, and does not accept the correct default passcode "0000" while the "Next" is grey out if I leave the passcode blank. And of course the Windows Media Player is then playing thru the speaker not headset.
Anyone has any idea? Is it an incompatible issue or I was doing it wrong?
pzbell said:
I am having a similar problem.
I have an I.Tech Clip Radio that is capable of A2DP. When I was adding the new device, leaving the pin blank, headset was added successfully with both headset and wireless stereo profiles. Then in the Bluetooth setting page, when I try to "Set as wiresless stereo", a message will show trying to add headset into device list, press yes it will request for passcode, and does not accept the correct default passcode "0000" while the "Next" is grey out if I leave the passcode blank. And of course the Windows Media Player is then playing thru the speaker not headset.
Anyone has any idea? Is it an incompatible issue or I was doing it wrong?
Click to expand...
Click to collapse
I've had the same problem with my Jabra SP700, I'll toy with it tomorrow and see if I can find something.
I have a similar problem, bought a bluetooth headset at DX. It is connecting to the phone,
but as soon as I start a call it disconnectes by its own.
I have no idea whats wrong, somebody who can help me?
I think/hope I found the solution:
http://forum.xda-developers.com/showthread.php?t=471181
Related
Using the Voice Command over Bluetooth registry hack I am able to have the BT headset kick in and work with Voice Command perfectly well. I can even change the registry setting to have it run something else, like te Media Player, and hear music over my head set (It's a Jabra XJ10 btw). Problem is, the headset stays connected for only about 15 seconds, before switching off and the TyTN using it's main speaker again. Has anyone figured out how to keep the connection on by any chance?
It shows that playing music over a non BT Stereo headset is possible. But it stops automatically after 15 seconds as voicecommand restarts. I think there is some way to rework this so we can listen to music with the BT headset.
qing84 said:
It shows that playing music over a non BT Stereo headset is possible. But it stops automatically after 15 seconds as voicecommand restarts. I think there is some way to rework this so we can listen to music with the BT headset.
Click to expand...
Click to collapse
The 15 second thing applies even when te button is made to run media player, or some other software, not just voicecommand. I am hoping there is some registry fix that can be changed to fix this. Either that, or some hardware registry fix that would allow me to change the already-detected handsfree profile of my headset into a BT Stereo profile. If anyone has a BT stereo headset and access to registry settings for it, please post them here so I can try messing with it. Thanks.
I did see a program some where on here that allowed you to click a check box and it put all audio through the BT headset. Search around, I'll see if I can find it again.
I have an iTech S35 bluetooth headset for taking calls and listeneing to music but everytime I connect it to my Tytn by BT, I always have to go into the settings of the BT connection on the Tytn to 'set as wireless stereo'. I have to do this every time or I can't listen to music - is this right or have I missed a setting along the way?
I don't have the s35 but with my sony ds I just set it up once, if I want to activate it I just press the play button on the bluetooth headset and it goes into wireless stereo, try pressing the power /play button on the s35 to see if it switches, you should only set it once, there are some clips that had issues though, but I don't think the s35 was one of them.
Hey Sean,
I've got the same issue!!! The manual does say after switching the S35 on you shoulf press the MFB to initiate the connection but this doesn't happen!.
I'll try the headset with some other phone like the N70 tomorrow and see what happens there as the headset is in work - no it's not! It's here!!! Let me try and post another reply...
Gav.
Just tried with my PC and have the same issue. Need to tell my PC to connect to the headphone profile after switching on the S35.
EDIT:
Just stole mt friends Noaki 6680 and installed the I-Tech MSI player on it. But you need to configure which BT device the player uses so what i think is happening is that when you play music (can only be with the MSI player for stereo) the software connects to the S35 first like doing 'set as wireless stereo' on the TyTN then plays the music...
Nightmare, might have to upgrade to an R35 or somethigh with a remote as I think the remote command from the clip to the TyTN initiates the BT connection for audio also.
Gav.
Hope someone can help me with my problem (Nothing found on XDA search).
I have a BT620s headset and it works great, both for stereo music and as a handsfree set.
The problem is, if I disconnect the bluetooth or answer a call I always loose the Wireless stereo. Under the BT devices is it still shows as selected but I always have to do a refresh reselect "wireless stereo" and save it again to get it working each time.
Is there something I can do to make it stick ie: registry setting?
Thanks
confirmed
Hi to All,
i have exactly the same problem. Actually, in my case even an alarm or a reminder switches the A2DP to mono and i am not able to go back to stereo without a soft reset....
Anyone have an idea?
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea
mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.
Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time
Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music
Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.
Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!
No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!
I have been reading many threads on getting the "stereo audio" connection to auto connect fot BT Stereo headsets. It seems that when you pair it the first time, both "Hands Free" and "Stereo Audio" are working. When you disconect your headset and reconnect it again, only "Hands Free" connects.
I have tried A2DP toggle and A2DPSwitch, but they dont seem to work on the HD2. A2DP toggle did work when I had my old Samsung Omnia i900, so I can assume that its something to do with the HTC Phone Bluetooth stack
Each time I want to use the BT Stereo headset, I need to go to settings/menu/all settings/Bluetooth/590Plantronics and expand + and select "Stereo Audio". They then connect.
What I would like to do is until there is a fix for this, to reduce the number of taps, is create a shortcut to the Bluetooth Control Panel that shows the 590Plantronics device.
Is this possible?
Thanks Chris
Just make a shortcut to Windows\BTManager.exe and add it as a quicklink.
hi,
i have a jabra 3030 and a motorola s705 and both are reconnecting (handsfree and stereo audio) properly, when i turn them of and on again. when i go out of range (eg. forgot the mobile in teh car), when i come back the handsfree connects direct, and the setereo audio after i press the play button once. maybe this works for you also.
regards mad
I installed AutoA2DP on my phone and ever since, whenever I turn on my headset, it always connects as both stereo bluetooth and headset. I haven't tried it on an HD2 but you should definitely try it out.
I found the .cab of AutoA2DP awhile ago but forgot where I found the download link. In any case, I have attached it for your convenience.
D.W
Hi kilrah, thanks for your advice! That cuts out a few blinkin clix now and will do as a work around till this fiasco is solved, lol
I also noticed something very bizzare, and it is confirming my suspicions that HTC is in cahootz with MS or Widcomm or both, lol.
I tried using auto a2dp as suggested by GurWu, leaving the a2dp.ini file as wmplayer.exe. I then deleted the Plantronics from the system, re-paired them and what should spring to life after turning on the cans? You guessed it..WMP all paired up with HF and Stereo Audio. Turned off the headsets, turned them back on again and sure enough, WMP launches and plays thru the headsets.
All good, except I wont use WMP as it STILL doesnt have an EQ (Not getting in to why one needs an EQ or not here, lol)
No problems, I thought, Ill just set the a2dp.ini to pocketplayer.exe (my preferred player) turned on the headsets and.......nothing....no pocket player came to life.
Doing a manual launch of PP revealed that the headsets were only paired as HF, so back to my original problem.
Renamed a2dp.ini back to wmplayer.exe and it all works as it should....mmmmmm...does this wreak of a MS/HTC/Widcomm ploy? LoL
PS @ mad: When you said press the play button, were you referring to the play button on the software of your chosen media player or a hardware button as I dont have a play button on my HD2
PPS: Got a reply bacl from a2dp toggle author, says that it only supports M$ BT stack :-(
Cheers Chris