Database Users

connecting A2DP Bluetooth headset with one button...???

i hate the process to connect with my bluetooth headset
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
gives any app to do this with one klick or one button ???

What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected

What the button?
I have four on my Sonorix :roll:

Only three on Logitech and two of them are volume controls so it's easy

This also doesn't seem to work on my i-Phono Minis, does anyone have a small app that switches this or knows of the API call needed to get the wireless headset to kick on?
Thanks,
Jon.

It's an A2DP issue. Some headphones connect, others do not.
The HP FA303/Logitech headset is one that works. The Moto HT820 is another but has an annoying high frequency distortion. I believe the Jabra BT620 also works correctly but I haven't personally verified this.

My I-Tech S35 BT Headphone adapter
I have to go thru the same process to get a2dp wireless stereo working.
Comm Manager -> Settings ->
Bluetoth Settings -> Devices ->
klick -> set as wireless stereo
I have tried shortcuts using vijays excellent app, but end up getting the wireless headset audio instead of full blown stereo.. there must be a better solution to this..

nolodude said:
What headset are you using? I have Logitech wireless stereo headset. I connect it like this:
1. Turn headset on.
2. Press button on the headset once.
3. Headset says "beep" and bluetooth audio is connected
Click to expand...
Click to collapse
I´m using the I-Tech Blueband
and i think i had see a BT-stark to connect with one button but i don´t find it..

This issue is very likely one of the reasons why A2DP was never officially released.

i think Buzz have write a little tool to do this but it´s hard to find it on the big forum...

Sleuth255 said:
This issue is very likely one of the reasons why A2DP was never officially released.
Click to expand...
Click to collapse
That doesn't make much sense - the reason why they didn't release technology was because it took too many steps to turn on? You wouldn't remove a room from a house just because the contractor put the switch in an inconvient location...

no... the reason it wasn't ever officially released was because of inconsistent device support. Some headphones connect just fine (HP, Logitech, moto) and others don't. Some headsets sound just fine (HP, Logitech) and other's don't (Moto HT820).

Hey guys. I had a moto ht820 (or whatever) and they connected automatically when they were turned on, but crashed frequently when getting calls. Now I have BT620s (jabra) and they work nice However I do have to go and connect them (sux).
So I am posting in hopes that VJ will see this and write a quick connect for the STEREO BT headset like he wrote the other one for Hands Free.
Later; Lew

I'm experience the same problem i have a2dp on my device (mda vario) but everytime i'll have to go to bluetooth, device's, select the headset and set as wireless stereo. isn't there a way to do this automatic?
Becouse it's really bugging me. i have the jabra 620

I have been using for awhile the Moto HS850 and have been able to initiate calls (via voice command), answer calls, etc.
Not too long ago, I went and purchased a H700 (for the noise reduction). For the life of me, I couldn't get the initiate call via VC to work, and it works perfectly with the HS850!
Does anyone have any idea why I would not be able to get the H to work?

Hey guys,
is now a solution out there to connect with one button
the jabra bt620 ??
regards
zehn
My Moto works very well and connect automatic...

a2dp hack
hello guys here is a a2dp hack, just download the cab upload to your device open it fromn your device
soft reset
then discover and add your headphones(stereo)
right click and select set as wireless stereo....
uploaded to htc p4350 worked perfect for headphones plantronics stereo bluetooth

doesnt work

check this page
http://www.teksoftco.com/index.php?section=freeware
here is a2dp toggle

Hi,
Just a quick question. My Moto HT 820 also works both playing music and working as head set. Unfortunately it's mono .
For the tests I've set the wizard to connect to Moto only as wireless stereo but
it keeps playing mono
Is that my issue or general ?
I run MX6r3
cheers

Is my headset behaving properly?

I have an iTech S35 bluetooth headset for taking calls and listeneing to music but everytime I connect it to my Tytn by BT, I always have to go into the settings of the BT connection on the Tytn to 'set as wireless stereo'. I have to do this every time or I can't listen to music - is this right or have I missed a setting along the way?

I don't have the s35 but with my sony ds I just set it up once, if I want to activate it I just press the play button on the bluetooth headset and it goes into wireless stereo, try pressing the power /play button on the s35 to see if it switches, you should only set it once, there are some clips that had issues though, but I don't think the s35 was one of them.

Hey Sean,
I've got the same issue!!! The manual does say after switching the S35 on you shoulf press the MFB to initiate the connection but this doesn't happen!.
I'll try the headset with some other phone like the N70 tomorrow and see what happens there as the headset is in work - no it's not! It's here!!! Let me try and post another reply...
Gav.

Just tried with my PC and have the same issue. Need to tell my PC to connect to the headphone profile after switching on the S35.
EDIT:
Just stole mt friends Noaki 6680 and installed the I-Tech MSI player on it. But you need to configure which BT device the player uses so what i think is happening is that when you play music (can only be with the MSI player for stereo) the software connects to the S35 first like doing 'set as wireless stereo' on the TyTN then plays the music...
Nightmare, might have to upgrade to an R35 or somethigh with a remote as I think the remote command from the clip to the TyTN initiates the BT connection for audio also.
Gav.

Bluetooth headphones auto-pair?

Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks

I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea

mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.

Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time

Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either

I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.

icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.

As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music

Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.

Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!

No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!

Bluetooth connection starts Mediaplayer

I want to use my TD2 with my bluetooth handsfree set, but it starts the mediaplayer, everytime a connection was established. Is there a way to prevent windows mobile to start the mediaplayer in this szenario?
Tube

I have the same issue, but its when pairing with my car stereo (Bluetooth handfree), but it also start streaming music through the line1 connection to my car stereo !!!
Funny I always wanted to do this, but could not, so went the integrated Ipod route, now I can I don't bloody want it.
Anyway, so far no solution

Same story to me. Also issue's bluetooth. when i want to controll my phone with bluetooth, it starts mediaplayer automaticly.

Hello, does anyone have a solution for this problem? my girlfriend has the same problem.

Have you tried disabling the "wireless stereo" (A2DP) service? Go to Comms manager-Bluetooth-Advanced, then tap and hold on the offending item till the menu comes up, choose "edit", then uncheck "Wireless stereo", leaving just the handsfree profile checked.
I'm assuming you're not interested in the stereo music function, of course!

Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo

obsydian said:
Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo
Click to expand...
Click to collapse
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.

Pete_S said:
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.
Click to expand...
Click to collapse
Thanks, i've tried every which way so far, but the problem remains, I found the only workaround is to remove any today or touchflo music tabs, at least that stops my TD2 steaming and drawing battery. Instead it opens windows media player, but i've purposely left that empty so at least nothing is being played (i.e. drawing power)
Bluetooth has come a long way, thats so funny you say that, I always wanted to be able to do this, but now my ipod is integrated into my car i don't.

Has anyone figured this out yet? Windows Media Player starts when connecting to the bluetooth factory fitted car kit when I don't want it to !
Is there a reg hack to stop Windows Media Player starting when the pairing takes place on the car's ignition?
Thanks!

T-back's 6.5 BT driver.cab
I had the same problem and I solved it installing T-back's 6.5 BT driver.cab
http://forum.xda-developers.com/showthread.php?t=545737&highlight=t-back+bt+driver
I am not sure whether T-back's 6.5 BT driver.cab has some drawbacks as claimed in the above thread, I am using pocketmusic on my Topaz wm6.5.1 italian paired with a parrot mk6000, still have some minor issues I can live with

Possible to send all audio over bluetooth?

I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,

i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do

xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.

My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....

Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,

yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!

I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(

it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation

Works fine with Jabra 3030, all audio over it, music, system sounds and calls.

Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?

I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,

its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)

I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.

Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.

I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?

I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....

the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.

Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.

Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.

Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?