Related
I have successfully made my ANYCOM stereo Bluetooth headphones ( http://tuxtops.com/node/464 ) to work wtih my HTC Wizard using the "wireless stereo" instructions that were posted the other day on this forum.
When you set it as "wireless stereo", is it supposed to also switch to handsfree functionality automatically? You see, over here this doesn't happen. The music stops when I get an incoming call, but I don't get the person's voice through my headset. The headset does not switch to handsfree mode.
Is this normal? Or something else is wrong?
I connected to my headset by clicking "set as a wireless stereo". If I also click "set as a handsfree", I don't get any music you see. So, why my headphones don't automatically change mode to handsfree on an incomming call? Anyone else with this problem?
i have the same problem but it doesn't bother me.
but if there is a fix then this would be cool and easier.
A2DP support for HTC Wizard can be obtained by using this hack/tweak: http://forum.xda-developers.com/viewtopic.php?p=275506#275506
didn't try it myself, but has been reported to work on HTC Wizard and other Windows Mobile 5 devices.
CIAO!
VOODOOS!L
Any solution so far?? I will receive my Anycom BSH-100 within the next days...
I don't think there is a solution apart from praying for a new ROM.
it might be a problem with the headset and rom
did you try repairing it?
because i know everything works fine for me using itech stereo
when a call comes in, it switches no problem
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea
mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.
Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time
Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music
Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.
Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!
No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
I have been reading many threads on getting the "stereo audio" connection to auto connect fot BT Stereo headsets. It seems that when you pair it the first time, both "Hands Free" and "Stereo Audio" are working. When you disconect your headset and reconnect it again, only "Hands Free" connects.
I have tried A2DP toggle and A2DPSwitch, but they dont seem to work on the HD2. A2DP toggle did work when I had my old Samsung Omnia i900, so I can assume that its something to do with the HTC Phone Bluetooth stack
Each time I want to use the BT Stereo headset, I need to go to settings/menu/all settings/Bluetooth/590Plantronics and expand + and select "Stereo Audio". They then connect.
What I would like to do is until there is a fix for this, to reduce the number of taps, is create a shortcut to the Bluetooth Control Panel that shows the 590Plantronics device.
Is this possible?
Thanks Chris
Just make a shortcut to Windows\BTManager.exe and add it as a quicklink.
hi,
i have a jabra 3030 and a motorola s705 and both are reconnecting (handsfree and stereo audio) properly, when i turn them of and on again. when i go out of range (eg. forgot the mobile in teh car), when i come back the handsfree connects direct, and the setereo audio after i press the play button once. maybe this works for you also.
regards mad
I installed AutoA2DP on my phone and ever since, whenever I turn on my headset, it always connects as both stereo bluetooth and headset. I haven't tried it on an HD2 but you should definitely try it out.
I found the .cab of AutoA2DP awhile ago but forgot where I found the download link. In any case, I have attached it for your convenience.
D.W
Hi kilrah, thanks for your advice! That cuts out a few blinkin clix now and will do as a work around till this fiasco is solved, lol
I also noticed something very bizzare, and it is confirming my suspicions that HTC is in cahootz with MS or Widcomm or both, lol.
I tried using auto a2dp as suggested by GurWu, leaving the a2dp.ini file as wmplayer.exe. I then deleted the Plantronics from the system, re-paired them and what should spring to life after turning on the cans? You guessed it..WMP all paired up with HF and Stereo Audio. Turned off the headsets, turned them back on again and sure enough, WMP launches and plays thru the headsets.
All good, except I wont use WMP as it STILL doesnt have an EQ (Not getting in to why one needs an EQ or not here, lol)
No problems, I thought, Ill just set the a2dp.ini to pocketplayer.exe (my preferred player) turned on the headsets and.......nothing....no pocket player came to life.
Doing a manual launch of PP revealed that the headsets were only paired as HF, so back to my original problem.
Renamed a2dp.ini back to wmplayer.exe and it all works as it should....mmmmmm...does this wreak of a MS/HTC/Widcomm ploy? LoL
PS @ mad: When you said press the play button, were you referring to the play button on the software of your chosen media player or a hardware button as I dont have a play button on my HD2
PPS: Got a reply bacl from a2dp toggle author, says that it only supports M$ BT stack :-(
Cheers Chris
Hi guys!
So, the Xperia support A2DP just fine, also in combination with my car stereo (a Pioneer Avic D3BT set). However, I find that when I start playing audio (doesn't matter if this is music or satnav guidance) before I start the car (and hence the stereo set), not only will the audio not be re-routed to the stereo, but the phone also fails to connect with the A2DP part. Phone audio (headset profile) is connected OK, though.
Is this normal behaviour/has anyone seen the same behaviour?
Oh, and if anyone has a way of transferring contact to the phonebook of the car, I'd be delighted to hear about it. For me, it will immediately disconnect if I even attempt to transfer a phonebook item.
Hey Stampot. I have a Pioneer BROWSE system(BTB200) and I have the same problem. I find if I activate the phone bt after the car is on, A2DP connects fine. But if I do it the other way around,I only get phone audio. To fix I either have to disable/enable the phone bt or (the faster way) toggle the a2dp option. I'm hoping a de/firmware upgrades fixes the prob.
-------------------------------------
Sent via the XDA Tapatalk App
Its works better when u start the car first and that should not be a problem, shouldn't????
Its the same with every Bluetooth Headset. U can do it with the other way, but u must choose the Audioconnection in the Bluetoothsettings manually.