I paired my bleutooth headset several times now. It connects allright but everytime I have to give the headset password . I thought pairing was needed only one time.
I hope somebody has an answer for me .
Hmm, perhaps an obvious question but how do you pair your device? What steps are you taking?
I had this problem once, every time I came into range of my carkit there was the bluetooth message a device was trying to pair and I had to give the password.
However once I removed the pair and did it again it worked properly...
Hello Raptor, thats exactly what happens.
I pair the first time the headset and the s200 by holding a button and then de s200 asks for the key, i klick finish and it works fine.
But nex time I want to use the headset whe recognizes the headset but asks for the key again.
Hmm.. that's kinda weird. Dunno if you can "reset" the headset in any way?
With my carkit the problem was (I think/guess) that the carkit remembered the pair with my s200, but since I upgraded the rom the s200 didn't know the carkit anymore. But since I used the same name etc on my s200 something might have gone wrong.
It could be however that when you try to pair with your headset and you have to enter the password a popup comes up saying a device is trying to pair with your s200. You have to ignore that popup and just pair from the bluetooth settings of the s200 (from where you started, not the popup).
At least that's what happened on the carkit lol Never had a problem with my headset though :/
So I did a reset on the carkit and removed the pair from the s200, then searched again for a bluetooth device on the s200, paired with password and then it worked properly.
Hello Raptor, I tried your option several times but the situation stays the same. But thx for your input.
Hmm.. does the headset have a password at all? Maybe you can leave the password entry empty? Although I'm afraid it wont.
But otherwise I hope someone else can help you with this :/
I'm speechless, this morning te headset connected without asking for the password.
Beats me, but i'm happy!
Greetings!
Related
hi ppl
i use an austrian mda2 w/ ROM 1.6.00GER and ExtROM 1.60.07 together with a parrot ck3000 handsfree in my car.
i use the original bt stack w/o ANY changes.
making calls and taking calls is no problem at all and works most of the times.
the problem is as follows: when i enter the car, bt turned on, and also profile says "BT Headset ist eingeschaltet (means bt headset is turned ON)", and the n i want to place a call, the call is not routed over the handsfree. explanation is simple: when i change back to "today" - bt is turned OFF !!!
so my conclusion: everytime bt is used for the first time after disconnetion from the handsfree, it just turns OFF when it should connect. after i turn bt on by hand again it works w/o any problem. ('till i come back to the car of course - and everything starts again)
this is very annoying....
so has anyone any hint what to do? i wouldn't really mind updating to an english rom - if i just knew that that does work.
thanks,
servus ize|man
when i use this one
http://bluetooth.i-networx.de/index_e.html
my device turn bluetooth on when i call even though i dont have a bluetooth headset maybe it'll help you
thanks rudegar
i know that stack by TOWA. unfortunately that does not work at all here
i'd love to use it, but w/ this stack my handsfree is reconized sometimes, sometimes i have to pair the devices every time i start my car, and i can NEVER place calls with the combination mda2 with networx bt manager installed.
maybe someone has the same experiences and can report them
servus ize|man
Hi! I bought a cheap BT headset (ERGENIC BLUETOOTH HEADSET ERG BT-001). Althought my Orange C500 connect perfectly with this BT headset, my WIZARD don't. The headset is detected and wizard asks me for the password (0000) but after some seconds it says: connection impossible and back to the password screen. Any help from you? Thank you.
Re: My MDA-VARIO doesn't connect with my new cheap BT headse
dcoelho said:
Hi! I bought a cheap BT headset (ERGENIC BLUETOOTH HEADSET ERG BT-001). Althought my Orange C500 connect perfectly with this BT headset, my WIZARD don't. The headset is detected and wizard asks me for the password (0000) but after some seconds it says: connection impossible and back to the password screen. Any help from you? Thank you.
Click to expand...
Click to collapse
Is the wizzard a bluetooth 1.1 compatible ? the headset is a 1.1 product.
Maybe is that youre problem.
same problem here, same headset...
Same here.... I was guessing that the Wizard was compatible.... but hey you never know with MS - that would be too easy to follow a standard.
I'm hoping the new ROM which seems to be serfacing will solve the prob.
Terran
PS Maplins ? lol
Any solutions yet?
Mertoglu said:
Any solutions yet?
Click to expand...
Click to collapse
I wish....
Terran
No solution? please help someone
When I pair my 8125 with my bluetooth headset for the 1st tiem, it pops up a window asking if I wish to pair them.
I say yes, enter the PW and off I go.
My question after this initial interaction is:
How can I tell what devices are ACTIVELY paired after the initial use of the device.
The reason I ask this is when I pair my headset for the 1st time, it works 100%. If I turn my headset off, then on again, it never works. I have to delete the device from my 8125 and re-pair it again.
Is there a wonderful 'active devices' screen I don't know about and how do I get my headset to pair up time and again, unlike the current state of 'pair, delete, pair, etc..'
Thanks a bunch,
Lowkee
PS- As an additional bonus for looking at my question, here is a set of startup screens I made for those of you who have Wizards
I call it "The speedometer" .. for obvious reasons. Enjoy!
When the headset is paired with the phone can I somehow receive a call on the phone and not on the headset or I should turn off the headset if I want to do that ?
Sorry if the answer is in the 2020 manual - didnt get it when I bought it
Thanks
If you want to answer the call with the PDA, you'd use the green button on the himalaya. If you don't press the control in the headset and get the call using the green button the audio comes out from the PDA and not from the headset.
I hope my poor english is understandable.
omg, yes I undesranded you perfectly, thanks
You just reminded me of my big problem once, somehow I ve changed digital clock to analog in the today screen. After some time I ve forget how did I do that and no matter of what I used to try clock remained analog. Digged thru the 2020 from alpha to omega, digged thru the registry... No luck. Utils, no luck. Clock remained analog.
Asked my friend, qtek user, about the problem. Guy clicked and holded the stylus on the clock for a few seconds. Menu appeared - digital or analog
Obviusly some simple solutions are not always visible to all of us
Thank you once more
ahh one more quickie please, if the headset is paired to the phone and Im a caller how can I talk to someone using the PDA not headset ?
thanks
BT headset (not work ;P )
Gosh.. I would like to have your problems... I can't turn on headset on BT... when I turn it on the headset connects once and after the connection there is no option to turn it on... only fisconnect of bluetooth and reconnect ;/
O2 XDA 2 with WM 2003 SE
hi i have a problem when i connect with my bluetooth headset my spica shows this message "to pair with "z-w88", confirm that it is showing the passkey: 921062" which is weird because my B.Headset does not have a screen and that pass key is always random every time i try to connect it wont let me enter the 0000 required
pass key.
the "z-w88" bluetooth headset works well with my nokia E51 and my P1i
does anyone know what to do?
thanks so much!
BTW
my spica is running on android 2.1 eclair.
I have had the problem with Jabra bluetooth headset.
Whta I did I just clicked OK on screen and it is working properly.
Maybe you should try this.
(If I want o pair another device, the password is always randomly, but th pairing is succesfull in every case)