Hi! I bought a cheap BT headset (ERGENIC BLUETOOTH HEADSET ERG BT-001). Althought my Orange C500 connect perfectly with this BT headset, my WIZARD don't. The headset is detected and wizard asks me for the password (0000) but after some seconds it says: connection impossible and back to the password screen. Any help from you? Thank you.
Re: My MDA-VARIO doesn't connect with my new cheap BT headse
dcoelho said:
Hi! I bought a cheap BT headset (ERGENIC BLUETOOTH HEADSET ERG BT-001). Althought my Orange C500 connect perfectly with this BT headset, my WIZARD don't. The headset is detected and wizard asks me for the password (0000) but after some seconds it says: connection impossible and back to the password screen. Any help from you? Thank you.
Click to expand...
Click to collapse
Is the wizzard a bluetooth 1.1 compatible ? the headset is a 1.1 product.
Maybe is that youre problem.
same problem here, same headset...
Same here.... I was guessing that the Wizard was compatible.... but hey you never know with MS - that would be too easy to follow a standard.
I'm hoping the new ROM which seems to be serfacing will solve the prob.
Terran
PS Maplins ? lol
Any solutions yet?
Mertoglu said:
Any solutions yet?
Click to expand...
Click to collapse
I wish....
Terran
No solution? please help someone
Related
I bought a XDA2 and a Jabra freespeak 250 bluetooth a few ago. I managed to "bond" the 2 without problems but I cannot receive or make any calls with the Jabra headset! My friend has another XDA2 and hers works with my Jabra headset! What's wrong with mine?
My Jabra has a 12C marking.
Please help!
I have a colleque who had the same problem, Installing of the Bluetooth patch solved the problem nicely
http://bluetooth.i-networx.de
Install the patch and it will work everytime
did you activate your headset profile???
:lol:
yanaseena said:
did you activate your headset profile???
:lol:
Click to expand...
Click to collapse
I may not have done this!
How to do this?
i don't have this problem with the 10C
the only thing that mines not doing is being able to pick up a call if the bluetooth is off on my XDAII and jabra then turning both on during a call. the jabra doesn't pick up the call.
any one know what to do to transfer the call to the jabra?
monkeyviruses said:
yanaseena said:
did you activate your headset profile???
:lol:
Click to expand...
Click to collapse
I may not have done this!
How to do this?
Click to expand...
Click to collapse
Go to start>settings>today>items then check headset profile. Then when you're on the today screen click it on when you've turned on your phone's BT modem
Jabra 250 working with imate running 1.72 (no Bluetooth tools added)
hi guys, i know all of you want more bt stack rather than ms bt stack. now i found new bluetooth stock for dopod 818(o2 mini).
this is support your o2 mini support stereo bluetooth headset, but make should your bt headset supports. and there is also file transfer stock......and other thing, but stereo bluetooth function need to be improving.
attention: backup you system first.
i learn a lot in this forum, so i want to share this stock for all of you. this stock is i find from somewhere, so i can not fix any bug. anyway just enjoy....
First post and delivering such a revolution? Makes me nervous...
Chatty said:
First post and delivering such a revolution? Makes me nervous...
Click to expand...
Click to collapse
HAHA, I KNOW. BUT YOU CAN TRY, PLEASE FIND ATTACHED PHOTO. THIS DRIVER COME FROM ONE BLUETOOTH HANDSET.
Could this be? Can anyone verify?
Handsfree versus headset
Hi,
I tried and first thing, everything work now as fine as before so a first good point.
Second one problem : my Bluespoon AX is only recognize as a Hands-free and you can only set "Audio redirection" for Headset.
Perhaps some registry work ?
I will continue to investigate
very nice patch indeed..
installed it on my JAM... an it runs OK...
some extinsive testing is required however... I'll let you know later
Thank you kevinyang6688
If this works, you'll be the best
Works here aswell!
it even seems to support bluetooth printing???
---
just downloaded.. will give it a try.
thanks.
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Re: O2 MINI NEW BLUETOOTH STOCK.
vicqoo said:
kevinyang6688, could u pls send me the program for testing only, i am using o2 mini w/ jabra bt330 headset, [email protected]
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
When you're logged on, you can download the file in the first post.
INstalled it but I have no clue how to make it work. Been to the BT settings and everything is there but I have no clue to as it does not detect my my Jabra BT250V.
Will this work in actually turning my Jabra into an audio headset or is it only as phone headset?
Does this help at all with the Nokia car kit echo issue?
Cheers
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
To Leewenam
Same thing for me but my Bluespon ax is only detected as a handsfree
Re: To Leewenam
eurorpeen said:
Same thing for me but my Bluespon ax is only detected as a handsfree
Click to expand...
Click to collapse
I guess this audio streaming thing only work for stereo BT? can anyone confirm this?
leeweenam said:
i'm using O2 mini. After installed... Nothing shown in the "Default headset" drop-down-list-box of the Audio tab
Anyone having similar issue?
Click to expand...
Click to collapse
maybe delete the device and bond it again???
Re: O2 MINI NEW BLUETOOTH STOCK.
kevinyang6688 said:
NOW I FOUND NEW BLUETOOTH STOCK FOR DOPOD 818(O2 MINI). ENJOY.
THIS IS SUPPORT YOUR O2 MINI SUPPORT STEREO BLUETOOTH HEADSET
ATTENTION: BACKUP YOU SYSTEM FIRST.
Click to expand...
Click to collapse
Man, you seriously kick a$$! This cab adds A2DP, FTP (successfully sent a series of 3 files to my Magician :shock: :wink: ), Audio Gateway (was able to use my laptop as a BT handsfree ), BT Printing Profile... AWESOME!!! Takes MS BT stack to a whole new level :shock:
But you could already send files with activesync over bluetooth without this stack (do i suppose ftp service is the same thing). Btw can you acces the files located on your computer from your mini now??? (if yes plz tell me how)
As far as I am concerned, it works but doesn t change anything with my bluetooth headset and voice command, i always don t hear any voice command sound in my bt headset, but then I hear the phone conversation directly in the headset...so nothing has changed.
Would have loved so much to hear and launch voice commands directly from the headset's mic.
But thx anyway! that s a really good thing for us anyway =)
It does work with I-tech S35 Stereo BT Headset
As per subject really...
Just tested this on my 1.12.00 T-Mobile Rom and indeed all audio is indeed being re-directed to my headset. Only 'drawback' is that I can't get it to work with PocketMind Pocket Music- the sound it just muted.
But it works perfectly well with Windows Media Player. Slight hitch with WMP is that I am unable to change the volume on the software or indeed the JAM system volume directly- a minor fault for me since I have a volume control my headset Also the music seems to cut out for a second or so every 7-8 seconds.
Music pauses and restarts when an incoming phone call is received.
A massive thanks goes out kevinyang6688. Cheers mate, I have been wanting this for ages! Thanks again!
I paired my bleutooth headset several times now. It connects allright but everytime I have to give the headset password . I thought pairing was needed only one time.
I hope somebody has an answer for me .
Hmm, perhaps an obvious question but how do you pair your device? What steps are you taking?
I had this problem once, every time I came into range of my carkit there was the bluetooth message a device was trying to pair and I had to give the password.
However once I removed the pair and did it again it worked properly...
Hello Raptor, thats exactly what happens.
I pair the first time the headset and the s200 by holding a button and then de s200 asks for the key, i klick finish and it works fine.
But nex time I want to use the headset whe recognizes the headset but asks for the key again.
Hmm.. that's kinda weird. Dunno if you can "reset" the headset in any way?
With my carkit the problem was (I think/guess) that the carkit remembered the pair with my s200, but since I upgraded the rom the s200 didn't know the carkit anymore. But since I used the same name etc on my s200 something might have gone wrong.
It could be however that when you try to pair with your headset and you have to enter the password a popup comes up saying a device is trying to pair with your s200. You have to ignore that popup and just pair from the bluetooth settings of the s200 (from where you started, not the popup).
At least that's what happened on the carkit lol Never had a problem with my headset though :/
So I did a reset on the carkit and removed the pair from the s200, then searched again for a bluetooth device on the s200, paired with password and then it worked properly.
Hello Raptor, I tried your option several times but the situation stays the same. But thx for your input.
Hmm.. does the headset have a password at all? Maybe you can leave the password entry empty? Although I'm afraid it wont.
But otherwise I hope someone else can help you with this :/
I'm speechless, this morning te headset connected without asking for the password.
Beats me, but i'm happy!
Greetings!
Hi.
Recently I ve bought a UMPC Samsung Q1U. When my headset (Nokia BH-700) is connected to my Athena (always) is very difficult to connect my umpc to internet using the Pda Bluetooth PAN. When I turn off the headset then I can connect without problems. Someone saw this problem? Someone hasnt this problem?.
Dani
ok not sure if this will help but try to connect the headset after you connect the q1u. Just FYI the bluetooth for the x7500 does not have EDR
No such problems here. I use Jabra 500v.
irus said:
ok not sure if this will help but try to connect the headset after you connect the q1u. Just FYI the bluetooth for the x7500 does not have EDR
Click to expand...
Click to collapse
Yes but Its very boring to disconnect the headset before connect the umpc....
Tadeusz said:
No such problems here. I use Jabra 500v.
Click to expand...
Click to collapse
Thanks. Later I will test with a motorola I ve at home
'No luck. Ive tried with HTC Athena and TYNT with two headsets: BT-2OO and BT-700 Nokia and all the possible combinations and always the same problem.so It seems a problem between HTC devices an nokia headsets. And If I disconnect the headset and connect to BT PAN the I cant connect the headset until I disconnect the DT PAN connection
Dani
Just tried with MotorolaDR-BT30Q and all works ok so it seems a problem of nokia headsets.
Dani
Sorry, DR-BT30Q is a sony product. No problems with sony. I ve tried with Motorola 500 and again same problem. I suppose these headsets uses some "well known" port used by PAN. Doesn somebody know how to avoid it?, or could you tell me a good headset that hasnt this problem ??. (I use Sony headset in the gym and is too big).
Dani
Hey all, I'm new to the site. I've been reading a lot on everything about the Kaiser and I absolutely love it. The information on this site at times can get a little bit confusing but I still manage to get everything done.
My problem is that I can't seem to pair my bluetooth headset (Plantronics 520) with my At&t Tilt. My tilt is not able to discover my headset :-( I was wondering if there is any problem with my phone or just that my bluetooth headset is not compatible with my device
btw I have L26 V10 installed
Thanks in advanced to all those viewing and offering their help (and sorry in advanced for my English as it isn't my 1st language >.<)
Shimei said:
Hey all, I'm new to the site. I've been reading a lot on everything about the Kaiser and I absolutely love it. The information on this site at times can get a little bit confusing but I still manage to get everything done.
My problem is that I can't seem to pair my bluetooth headset (Plantronics 520) with my At&t Tilt. My tilt is not able to discover my headset :-( I was wondering if there is any problem with my phone or just that my bluetooth headset is not compatible with my device
btw I have L26 V10 installed
Thanks in advanced to all those viewing and offering their help (and sorry in advanced for my English as it isn't my 1st language >.<)
Click to expand...
Click to collapse
I think it is the settings off your BT Headset i think. It is a common problem for me with other BT Headsets.
Use the powerbutton from the BT headset till you get blue light without interuptions.
Then phone must "pair"
I had the same problem.
>.< even when my bluetooth headset is in pairing mode i can't find my headset on my phone :-(
Does anyone on this site use a plantronics 520 with their Kaiser?
Shimei said:
>.< even when my bluetooth headset is in pairing mode i can't find my headset on my phone :-(
Does anyone on this site use a plantronics 520 with their Kaiser?
Click to expand...
Click to collapse
Samme problem with 320 Plantronics & TyTN 2
If I push pickup call on headset the voice commandor start