Guys, I can't connect my O2 Bluetooth clip with my XDA Atom. I already input the right passkey (0000), but it said "unable to connect, make sure your passkey is correct". How to resolve this problem ?? I tried using another passkey, but nothing happen.
probably you can try to reset yr bluetooth headset to it factory setting, this was what happened to me too and i tried a factory reset on my bluetooth headset and it was ok already.
i thinks for bluetooth clip u should use 8888 for password.not 0000.i hope it's right.cheers...
Yudha_krenz said:
i thinks for bluetooth clip u should use 8888 for password.not 0000.i hope it's right.cheers...
Click to expand...
Click to collapse
Just got XA-06 BT stereo handfree. the password is 0000 for sure.
If you can't connect it after a factory default reset, i suggest you to exchange one.
I can confirm that the working password is 0000
My experience on my Trinity: stereo audio streaming, call handling, and remote control work seamlessly (smoothest I've ever tried).
However, I have problem with its microphone. Seems it picked environment sounds more, rather than my own voice. Worst happened in noisy environment, people whom I talked to complained they hear my surroundings better than I speak. I've tried to positioned the receiver/mic in any ways possible, but not improve much.
How can I improve the mic sensitivity for this particular O2 XA-06?
Related
I have only had my XDA 2 for a week and I can’t get my Motorola 810 head set to work. The XDA finds it and tells me that it is compatible with headset profiles but it doesn't seem to work. Can anyone advise me?
Thanks
Andy
Have you followed the procedure for pairing the device,ie: place xda in discover mode, when it finds the headset, tap then enter code for pairing, once paired switch bluetooth to on, then make sure you have bluetooth headset turned on from the main/today screen.
I seem to have problems with my bluetooth headset every once in a while also. I have a HBH65. On ocassion, the connection doesn't seem to be working even though headset is enabled and they are paired. I've found that if I soft reset the XDA2, that the bluetooth headset will work again.
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
I have downloaded the new Rom update and it seems no different. I have tried a soft reset and this did not improve the situation.
I know the headset works fine as I use it with my nokia handset with no problem.
Has anyone got a Motorola 810 that works ok on the XDA ?
cruisin-thru said:
Have you installed towas bluetooth tools patch, this fixes a lot of problems with bonding and alos makes things work where they couldnt before. I was told that the latest rom release here in UK was going to address all these problems too but I havent got around to upgrading yet, I hope it supports full headset profiles so I can originate calls from the headset as well as answering the call.
Click to expand...
Click to collapse
did the bluetooth tools patch support voice dial from bluetooth headset? if not did anyone know the new rom from O2 works with this function? thanks!
Andy, no it doesnt support originate call from headset but it did allow lots of different gps and headsets to work, the headsets work for answer call/drop call only as far as I know, in the notes for the xda2 upgrade it mentions the headset profile but I dont know if anybody has hot the headset facility to work yet, I havent upgraded yet so I am yet to test it.
I have installed the new ROM and as far as I can see it does nothing for Bluetooth beyond fixing some compatibility issues on some headsets. It still only allows one headset profile (so if you have a headset and a handsfree kit as I do you need to delete bonded pairs when you change devices - now there's intelligent functionality!!). No headset dialing so still not a complete BT headset implementation. No handsfree support.
Anyone else think that the XDAII is a great PDA but about the worst apology for a GSM phone in the last 10 years?
If anyone can point me to a decent set of BT tools to add on let me know.
Not really.
I fully agree the XDAII is a poor phone, with the best agenda and contact list available, but that is!
I wonder if Phone-pda makers are really going the so called "convergence" way.
To date, and after many different PDA/phone/PDA-Phone devices I've tried, no one is even close to the mark.
Something so "simple" such as merging an OLD Ericsson (or Sony-Ericsson) T-68 phone abilities, with just a PPC 2002 (yes, not even 2003) PDA, should produce a combo, no machine on the market is even close to.
IT'S SO DIFFICULT?
:evil: :evil:
ive searched for ck-7w in the hermes section but finds nothing? surely others must use this handsfree kit?
Well my issues, my hermes wont find it when searching for bluetooth devises? Never had any issues with my wizzard?
ive tryed a few different wm6 roms, now on the black.
Is there a cab somewhere to fix this, as i cant, use this phone until i get it sorted with my car kit
Hi fil,
I can't speak to WM6 but my 7W works well (usually) with my 8525 WM5 ATT Upgrade Rom. I remapped the ptt button to activate the built-in voice dialing. Sometimes the system announces the name throught the 7w speaker, other time via the 8525 speaker. Who knows why?
The quality of the recognition software is fair. I am planning on re-recording some of the voice tags in the car via the 7w mic. I have a feeling this will result in greater accuracy. It has to do the the acoustics where the tags are recorded.
My BT settings in the 8525 are
Mode = Turn on BT and Make device visable
Devices = add new device, if it finds it, click on Nokia CK-7w & check off Hands Free, at the bottom of the screen hit Save
BTW, the 7w data cable 5 volt lead does not have enough balls to charge the 8525.
Let me know if you get WM6 working with the 7w.
Lyle
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
alylea, my tytn wont even find it, when searching, have ticked the make seeable to othe devices, the method you discribe works perfectly as said on my wizard
davw, reset the ck-7w how?
tho the ck-7w can do up to 7 phones in its memory i belive, had no issues with a wizard and 2 different nokia all paired on it allready?
davw said:
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
Click to expand...
Click to collapse
again how'd you reset it? dont have the manual
still aint working, see unable to see the kit!???
anyone?
right its working now?, done nothing different?
was sitting in my car thismorning doing a bluetooth search for my new stereo headset i picked up from the PO on my way to work, it found it and the carkit , and paired with both!
well problem solved, but **** knows how ???
No idea what did the trick but here is the Nokia Europe site for the manual.
http://www.nokia.co.uk/A4222096
So iGuidance voice instructions do not come out of the CK-7W speaker not do the voice dialing confirmation names, although basic HF function works. I'm testing an inexpensive application that routes all audio from the 8525 to the BT output. I'll let you know if it works.
I have Jabra BT320s stereo Bluetooth adapter, which I use flawlessly with Nokia E71. When trying to pair it with my HTC Magic, it fails. Basically, I put Jabra into pairing mode, then invoke pairing from Magic, and it says 'Pairing...' forever - virtually nothing happens on both Jabra and phone side after that. However, occasionally Magic pops out a PIN request after a while of waiting, but putting default 0000 PIN also doesn't help. I've even tried a hard reset (factory reset, that is) today but still no luck.
Anyone tried pairing A2DP device with Magic and could tell their story on this?
Sony DS970 pairs & works - mostly.
I have managed to easily pair a set of Sony DS970 earphones. The sound quality is very good and can control the standard music player.
The process went: turn on bluetooth -> discoverable -> search -> find -> pair -> working
It won't control TuneWiki though which is a shame.
Occasionally I have suffered from sound drop off when listening to music although it's fine when using in calls.
Thanks for that BigRD. I will try to hard-reset and/or upgrade firmware in my Jabra A2DP adapter later in the evening. Maybe that would help somehow...
I have finally managed to pair my Jabra successfully. I did firmware reset on it, but at first Magic still wasn't keen on pairing. But I tried couple of times, and finally took different approach. Once Magic stopped scanning BT devices ('Scanning...' and circling indicator have both disappeared), I've then started pairing process. Voila! Paired within seconds!
Excellent news
You're next mission:
By the end of today I would like you to figure out root access and share with the community
BigRD said:
Excellent news
You're next mission:
By the end of today I would like you to figure out root access and share with the community
Click to expand...
Click to collapse
Hahaha! I am not that Android-power-user (yet)
I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
According to a post from "Appelsap" we can make some progress to the A2DP connection.
I had a lot of trouble with connecting to my car radio (JVC KD-ADV49 or AVX44)
I can make a handsfree connection without any problem but when connecting also the Stereo mode (A2DP) I got serious problems.
It disconnects and never came up again. Sometimes it was able to produce some sound but then disconnects after one second.
I tried all tweaks without any result. Only the next tweak helped me out untill know;
Make a new DWORD entrance into HKLM/Drivers/BuiltIn/BtA2dpSnd with a decimal value of "149" The name is "Priority256" Now I have good sounds and it connects ok.
I will test it further and keep you posted.
The value has to do with the altering of the priority of A2DP
Also the track information is diplayed into the JVC head unit and I also can use the remote for skipping to the next or previous number.
I use windows mediaplayer, and when playing music the voice commands of Copilot or Navigon are spoken with little muted music, perfect!
Also I use Cyberon voice command which can be activated by the radio display.
What is the name of the Dword?? I have this same issue with my JVC.
"Priority256"
Oh sorry, the name is "Priority256"
Thank you, I will give this a try and report back. My system is a JVC KD-AVX77
JVC car radio's
Ok that's a newer system so in my opinion it's a HTC/Widcomm issue.
I think HTC has to bring a good solution for these problems
Don't forget to make a soft reset
I agree, I never had a problem with Microsoft stack. But I have never been able to use A2DP with my JVC on any HTC using the Widcomm stack. (HD2, TP2, or TD2)
No go on my JVC. Same problem. Disconnects as soon as I press play.
Glad to see it works for some, sorry to see it doesn't work for all.
Alan, you may want to try to alter the device code, so it connects as a regular phone rather than a PDA, I've seen some people have success with that.
I haven't yet fully tested the priority setting on my own car stereo (from parrot), preliminary results were good though, will report back as soon as I have done extensive tests.
Appelsap said:
Glad to see it works for some, sorry to see it doesn't work for all.
Alan, you may want to try to alter the device code, so it connects as a regular phone rather than a PDA, I've seen some people have success with that.
I haven't yet fully tested the priority setting on my own car stereo (from parrot), preliminary results were good though, will report back as soon as I have done extensive tests.
Click to expand...
Click to collapse
I made the following change:
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Still no go on the A2DP. Using the the Handsfree profile works very well, just no Stero Bluetooth.
It's very strange that you don't get a connection.
Today I had to make a soft reset and it's still working.
You can try to change the value of the registry key between 60 and 256.
As "Appelsap" already mentioned; with "60"you get connection problems..
In my case before this tweak I get handsfree connection and A2DP connection aswell but also disconnects when I press play onto my JVC set.
Then it will reconnect but with no sound at all (Handsfree and A2DP).
When I connected only the handsfree option everything went well.
With this tweak I have really a good connection also the sound is good only the voice from navigation software is cracking when I'm playing music.
Preferable is also to make a new connection to your headunit by deleting the old one.
I found an other issue with the music player from HTC.
When I use this player the connection will break and reconnect without sound.
When I use Windows Mediaplayer everything goes ok including skipping to next number and so on. How can you explain this.
valos said:
I found an other issue with the music player from HTC.
When I use this player the connection will break and reconnect without sound.
When I use Windows Mediaplayer everything goes ok including skipping to next number and so on. How can you explain this.
Click to expand...
Click to collapse
I have exactly the same problem ... flaky connection to my JVC KVX44 adn cannot use the HTC player - only Windows Media Player.
Since this post anyone found a solution please?
Thanks