I have Jabra BT320s stereo Bluetooth adapter, which I use flawlessly with Nokia E71. When trying to pair it with my HTC Magic, it fails. Basically, I put Jabra into pairing mode, then invoke pairing from Magic, and it says 'Pairing...' forever - virtually nothing happens on both Jabra and phone side after that. However, occasionally Magic pops out a PIN request after a while of waiting, but putting default 0000 PIN also doesn't help. I've even tried a hard reset (factory reset, that is) today but still no luck.
Anyone tried pairing A2DP device with Magic and could tell their story on this?
Sony DS970 pairs & works - mostly.
I have managed to easily pair a set of Sony DS970 earphones. The sound quality is very good and can control the standard music player.
The process went: turn on bluetooth -> discoverable -> search -> find -> pair -> working
It won't control TuneWiki though which is a shame.
Occasionally I have suffered from sound drop off when listening to music although it's fine when using in calls.
Thanks for that BigRD. I will try to hard-reset and/or upgrade firmware in my Jabra A2DP adapter later in the evening. Maybe that would help somehow...
I have finally managed to pair my Jabra successfully. I did firmware reset on it, but at first Magic still wasn't keen on pairing. But I tried couple of times, and finally took different approach. Once Magic stopped scanning BT devices ('Scanning...' and circling indicator have both disappeared), I've then started pairing process. Voila! Paired within seconds!
Excellent news
You're next mission:
By the end of today I would like you to figure out root access and share with the community
BigRD said:
Excellent news
You're next mission:
By the end of today I would like you to figure out root access and share with the community
Click to expand...
Click to collapse
Hahaha! I am not that Android-power-user (yet)
Related
Hello,
does anyone here drive a recent BMW that has the Bluetooth phone interface (essentially a bluetooth headset built into the car)? If yes, are you able to use it with an XDA-II?
I can't seem to bond the device with the car - the phone thinks it's done it, but the car just shows "BLUETOOTH PAIRING" and when I try to place a call the phone asks for the passkey and goes through what seems like a successful pairing process - but it does not actually work. The "BMW ULF wants to bond, enter passkey" message keeps appearing and appearing after every seemingly successful bonding attempt.
Anyone?
Marton
bmw bt
with the kind of money you paid for that car, the salesman should come over and do the pairing for you.
I remember reading somthing on this subjet on the forum.
Search the forum:
http://forum.xda-developers.com/viewtopic.php?t=4258&highlight=bmw
http://forum.xda-developers.com/viewtopic.php?t=3981&highlight=bmw
http://forum.xda-developers.com/viewtopic.php?t=5029&highlight=bmw
cheers
Thanks guys! I guess I'm out of luck then.
I tried to use a spare Nokia 6600 I had lying around and I got a bit further, but it's still unusable. The Nokia bonds perfectly, I can call with the car's interface, incoming calls ring in the car's speakers - but whenever the call is answered only the phone's speakers and mic work...
Apparently not only does the XDA-II not support the handsfree profile (if you think about it, why should it? it would be a surprise if ANYTHING BT-related worked on it) but the Nokia 6600 is screwed up too.
I guess I'll have to get a Nokia 6310. That's one of the the recommended phones by BMW:
http://www.circlebmw.com/parts/blue/phones.htm
I just thought that since I had a "universal phone kit" in the car it was supposed to work with any recent BT phone. Universal? That list above is shockingly short.
Have you installed the latest version of bluetooth tools?
Well, Bluetooth tools actually made things worse. It still wouldn't bond correctly with the car, but after that it kept connecting and re-connecting to my PC every few seconds, even when BT was off! (It seemed to turn itself on automatically after a few minutes.) The TDK systray notification was driving me crazy. Getting rid of BT Tools solved this partucular problem.
How is the new MDA-II ROM (1.72) in regards to Bluetooth? I hear that some bonding problems have been solved - is the handsfree profile supported yet? I'm tempted to upgrade but given that it's just a beta and it's hard to go back if I end up disliking it is discouraging.
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
I was having the same question, but people sais that it is not a good idea to keep your device recoverable from other devices all the time from security point of view. So, i refused from this idea
mixmasterollie said:
Hi folks
I've got my self a pair of HP Bluetooth headphones (very nice btw!) but every time I want to use them, I have to turn on bluetooth, go into bluetooth devices, press and hold the bluetooth headphones and select "set as wireless stereo".
My question is, is there anyway of getting my phone to automatically pair with my bluetooth headphones? Rather than having to go into the bluetooth settings everytime?
Or even put a shortcut on the today page would be easier enough?
Thanks
Click to expand...
Click to collapse
I found out that if you create a shortcut (.lnk) with notepad and put this in it:
23#ctlpnl cplmain.cpl,23,1
You can get right to the bluetooth devices screen. I haven't seen how to pair something automatically though. hopefully one of the bluetooth guru's here can figure that out.
Thanks Jizzay1
Start -> link -> Tap+hold -> connected
Alot better than comms manager -> bluetooth settings -> devices -> tap+hold -> connected
Maybe someone will find a way to press a link and connect straight away, but this way I can live with in the mean time
Obviously different to bluetooth headsets. I use a Nokia HDW-3 and it connects everytime, my bluetooth is not set to discoverable either
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
icemantwilight said:
I'm not sure why you guys have to re-pair your headsets. I never have. If bluetooth and the headset are on then I can make calls through it.
Click to expand...
Click to collapse
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
As iunderstood for the phone calls my STEREO headset is pairing automatically, but not for music
Jizzay1 said:
I'm having this problem with my STEREO BT headset, and it sounds like mixmasterollie is too, but it seems like the people that don't have this problem are using normal mono headsets. Please correct me if i'm wrong.
I'll have a mono headset to test tomorrow to see if my 8125 will pair with it automatically.
Click to expand...
Click to collapse
I just tried my friend's over the ear plantronics 510 mono headset and it pairs automatically once i turned on bluetooth on my phone and on the headset. My 8125 doesn't say anything on the screen once it's been paired, but it works.
Sounds like i just have to live with manually pairing my IOGEAR stereo headset.
Try playing with the "action" button on the headset. On mine, the volume up button has a dot on it. I turn on the BT, turn on the headset, wait a couple seconds and hit the volume up button twice. It automatically goes into wireless stereo when I do that. Boy, was I happy when I discovered that!
No such luck I'm afraid, my HP BT Headphones don't auto-pair, no matter what buttons I press on the headset
I think wireless stereo and hands free act differently, whereas the hands free ones connect automatically but the headphones only option doesn't.
Shame really!
i just got a pair of philips SHB6100 bluetooth stereo headphones/handsfree, and i'm seeing a strange issue.
The first time i pair the headphones with my Mogul they work great throught the standard WMP. If i walk away from the headphones (with my phone) so that they get seperated, i cannot get them to work again once they come back in range without removing the bluetooth device, and re-pairing the two devices. When the two devices come back in range, i can initiate voice activation from the headphones, but no audio from WMP is sent, reopening WMP and soft resets don't fix the issue.
Has anyone seen similar problems?
I'm using all stock drivers / rom.
i have the same problem .
The way i found around this is to go to Bluetooth manager .Press on the name of your head phone on the list .And sellect set as wireless stereo.
and they pair up again.
Thanks ace29ace
ace29ace said:
i have the same problem .
The way i found around this is to go to Bluetooth manager .Press on the name of your head phone on the list .And sellect set as wireless stereo.
and they pair up again.
Thanks ace29ace
Click to expand...
Click to collapse
Yep, the same thing here with my Sony HWSBTA2W Bluetooth Transciever. Oddly though, my Moto S9 headphones work without having to do this, all I have to do is do something on the headphones like change volume and they instantly pair up again.
Finally, i got my HD today. Everything is working fine, except for one thing.
I'm not able connect with my bluetooth carkit. I've tried severall things: Carkit searching my device, which was visible and device searching for carkit. Both without success
Anybody an idea what i'm doing wrong here?
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Acelister said:
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Click to expand...
Click to collapse
What do you mean with a power cycle?
I turned the device several times off. Performed several resets. No luck. The carkit is working fine with my old HTC 3600
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Got my HD yesterday, was able to pair Motorola S9 BT, both in headset and A2DP and listened to podcasts via RSS HUB. Today, nothing works!!!!
Tried soft-rebooting HD and restarting headset to no avail. HELP!
blackb1ade said:
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Click to expand...
Click to collapse
Same problem here. I was able to pair my HTC Touch HD with a JVC KW-NX7000 radio/Nav. On the display of the JVC I can see the batterypower of the HTC and the signal of my provider (Vodafone). My adresbook is transferred to the JVC, I can place a call from my JVC and then I get an error. When I turn on the screen of the HD Touch HD and then place a call on my JVC everything works fine. The problem seems to be, that the screen of the phone doesn't turn on when I place a call. When I dial a number on my phone, everything works fine.
I hope that someone has an answer to these problems.
I thought the problems had to do with the JVC but now I have my doubts.
Today I removed my bluetooth-connection and tried to make a new connection between my HTC Touch HD and the JVC KW-NX7000 radio/navigation in my car. On top of the screen of the HTC I saw two icons appear. (Left from the 3G icon)
I was surprised to see everything work, even though it was just for a short period. I could place a call from my JVC, the screen on my HTC turned on, the number was dialed and I got connected. At some point 1 of the 2 icons disappeared and again I wasn't able to make any calls from my JVC. The problem has something to do with those 2 icons which (should) appear when you make a bluetooth connection. I hope that somebody can help me with my problem.
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
james00000007 said:
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
Click to expand...
Click to collapse
Got excactly the same problem. Tried A2DPToggle but that thoes not work on my T-HD. Hope someby knows a tool or an answer for this.
absolutely agree , bluetooth is buggy !!!
sometimes I am loosing the connection to my car , sometimes it worked fine for hours , sometimes only for minutes
if I am listening to music (ds980) and receive a call, the connection to hear music is lost after closing the call
if I have some longer calls, sometimes the connection drops
so at the moment bluetooth @ HD is absolutely not stable !
buggy BT still happening?
Had issues with Nokia E71 randomly dropping/reconecting BT ... sometimes dropping during a call ... sold it on eBay
Brought Omnia i900 - Voice over BT headset does not work ... (but now a fix has been found over at modaco.com so happy)
was seriously looking at touch HD but will not if this thread is correct as sick of paying out good $$$ and finding a must have feature is not working
Q. has a fix been found or is BT still buggy
thanks
Bluetooth Problem
I think the problem may have something to do with multi-function devices (make and receive calls + stream music) I'm having problems with my Jabra
SP700 ,pairs no problem , 2 icons in top bar , can make calls and play music. Switch off phone or Jabra and then reconnect I can only make calls, no music, even though the 2 icons are displayed in top bar. I also have a Sony Erricson external speaker and a pair of Sony headphones both of which work fine no problem. Is this something that can be fixed with updated bluetooth drivers for HD?
I have some bluetooth headphones, that used to work a treat on my old Touch HD and Iphone, but when I turn on bluetooth on the galaxy s and search for devices, it simply doesn't find them...
Am I doing something wrong, sorry if this has been asked before, new to all this android stuff
Are you putting the headset into pairing mode before scanning for it?
Nope the headset simply has an on off button, it has a 0000 code and that's it ?
Usually a bluetooth headset has to be activated in pairing mode to be detectable for the first time. For example, holding the power button for several seconds etc. You may want to confirm with the instruction manual.
if you paired it the first time, it will automatically detect both features.
just for the record, my good old Motorola HT820 works fine with my SGS, loud and clear
I'm using the Sony Ericsson HBH DS-980 with my Galaxy S with no issues.
Aylarth said:
just for the record, my good old Motorola HT820 works fine with my SGS, loud and clear
Click to expand...
Click to collapse
i have the same one, it is the best Stereo Bluetooth headset IMO, with the best sound
Intratech said:
I'm using the Sony Ericsson HBH DS-980 with my Galaxy S with no issues.
Click to expand...
Click to collapse
i have an slighly older model of this one
i stopped using it due the wires, it gets annoying, it reminds me too much of using regular wired headsets
sound is good only when you stuck the entire plug into your ears, but it hurts after a while
I had the HBH 970, it sucked when it comes to sound quality.
here is my brief review
http://forum.xda-developers.com/showpost.php?p=7215233&postcount=5
of all the BT stereo headsets i've ever used
Sorry people, thanks for your help and your right, I wasn't holding the button long enough to initially pair the device, DOH!!!
Works a treat now, I thought it couldn't be the device had to me, and it was...
Not quite the same problem as OP, but related to bluetooth headset:
Having problems with a Plantronics Backbeat 903 bluetooth headset connection to my Galaxy S.
(Long story, so stick with me here...)
When I intiate a pairing and connect, everything's fine, but if I shutdown/disconnect the headset and then turn on/connect the headset again later, it seems to have lost the 'media' connection ( but 'phone' connection still appears active).
So, I look in Settings/Wireless And Network/Bluetooth Settings/Backbeat9XX, then long press to bring up 'Options' I see a greyed out 'Media' option. I press this to 'activate' it, and all seems hunky dory, but the headset still doesn't work for 'media'. I go back in thru all the steps & find the 'Media' option greyed out again.
Rinse and repeat; same result. Again & again.
Bottom line: can't seem to get 'Media' active & stay that way.
This headset worked fine with my Motorola Milestone, BTW.
Maybe the A2DP 'stack' is screwy on my phone? How would I check this/change this?
Any ideas?
I have sony DR-BT50 which the quality is very good and so comfortable using it with my laptop or nokia n97 , but I can not discover it by my samsung galaxy s,