Related
I'm aware of the various BT issues with the XDA II, and therefore installed BT Tools thinking it may allow me to use my handfree kit. Unfortunately I'm experiencing problems and not sure if this is me doing something wrong or there is a problem with the software. Basically the XDA II does not route either incoming or outgoing calls via the handfrees unit. I have do the following:-
1. Installed the latest BT Tools.
2. Created a bond with the Nokia Handfree kit, when prompted for the BT profile (the BT Tools icon screen) I select headset only.
3. Enable BT on the XDA II
When I make or receive a call is there any button or menu I should be selecting to enable the handsfree unit?
From the Today screen, make sure bluetooth headset mode is enabled.
And if Bluetooth Headset Mode does not appear on the today screen:
Start -> Settings -> Today -> Items and make sure Profile is checked. That will put the headset mode switch on the Today screen.
Thanks for the suggestions, I must admit I had missed the headset profile on the Today screen.
Even with the device paired, BT enabled & the Headset enable neither incoming or outgoing calls are routed through the handsfree unit.
Any other suugestions welcomed...
With the new bluetooth tools you need to transfer the call to the headset...
I find the best way when dialing is to have the phone ready to dial, then i hit the answer button on the headset causing the phone to dial & transfer sound to the headset @ the same time.
When answering the call the headset should ring and you press the answer button on the headset to recieve the call.
Ta
Christian
When you say press the headset button are you referring to the headset icon on the XDA or the Nokia handsfree button?
If its the Nokia button , I'll try this tomorrow, if not, then the icon does not ring and when receiving a call it is covered by the incoming call window.
Many thanks...
the nokia headset button
ta
Christian
Yep thats what I thought, I think I can confidently say there is a compatability issue with using the current version of BT Tools with the new Nokia CK-7W handsfree kit.
I've read the user manual for the handfree kit and that refers to switching/transferring the call between the BT devices using the button. The unit clicks as if there's something happening, but no call is heard, the unit works perfectly with a BT phone connected both Nokia & Motorola.
I would try uninstalling pocket BT tools - for using a headset it is of no additional value anyway. I do not have it installed and have never had any problems making or receiving calls with my SE HBH-30 headset.
Try using the earlier version of bluetooth tools, make sure you uninstall the version you have and also unbond/remove bluetooth pairings, rebond after successful install.
Pocket Bluetooth Tools is perfect! This is what I'm looking for, except I can't figure out how to listen to music thru my bluetooth headset.
Thanks for the great tool though, now I can make calls with my headset.
BRosenow said:
I would try uninstalling pocket BT tools - for using a headset it is of no additional value anyway. I do not have it installed and have never had any problems making or receiving calls with my SE HBH-30 headset.
Click to expand...
Click to collapse
The BIG advantage is battery life and not having to re-enable the headset profile each time you switch on the phone! With both PBT and/or Profile not displayed, I also get more Today real estate to play with.
With BT on all the time, I'm lucky to get four hours usage out of my Xda II, with PBT turning it off after five minutes the time can go up to almost seven. Sure, there is a short lag between call coming in and the headset (HBH-65) ringing but I can live with that and it even works well with Pocket Zen Phone. I also like the last number redial facility it adds to my headset. PBT rocks!
I found one problem with this program. My device won't automatically turn off after installing this tool. The backlight turns off, but not the device after certain minutes set. Who do I report the problem too.
i have got this problem to carnt get the xda i to connect to my car blue tooth hands free kit it finds the kit but nothing gome on guy get ya thinking heads on n help :idea: to revolve this problem
i have got this problem to carnt get the xda i to connect to my car blue tooth hands free kit it finds the kit but nothing gome on guy get ya thinking heads on n help :idea: to revolve this problem
Hi everyone,
well, I got the same problem :x with my XDA2, also called Qtek 2020, and Nokia carkit 112. It just does'nt work, even with BT tools. But I wonder how you get the icon screen while connecting to your Nokia carkit...cause mine is going straight back to the "Bluetooth connected devices" screen. I only got the icon screen, enabling the profile selection, while connecting to my Nokia 6310i phone.
Let's hope that HTC is gonna come up with Handsfree profile soon...
Regards to all, special ones to our OZ friends!! Mates, I really enjoyed living in Sydney, even if Italy is quite convenient as well.
Chris
Finally, i got my HD today. Everything is working fine, except for one thing.
I'm not able connect with my bluetooth carkit. I've tried severall things: Carkit searching my device, which was visible and device searching for carkit. Both without success
Anybody an idea what i'm doing wrong here?
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Acelister said:
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Click to expand...
Click to collapse
What do you mean with a power cycle?
I turned the device several times off. Performed several resets. No luck. The carkit is working fine with my old HTC 3600
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Got my HD yesterday, was able to pair Motorola S9 BT, both in headset and A2DP and listened to podcasts via RSS HUB. Today, nothing works!!!!
Tried soft-rebooting HD and restarting headset to no avail. HELP!
blackb1ade said:
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Click to expand...
Click to collapse
Same problem here. I was able to pair my HTC Touch HD with a JVC KW-NX7000 radio/Nav. On the display of the JVC I can see the batterypower of the HTC and the signal of my provider (Vodafone). My adresbook is transferred to the JVC, I can place a call from my JVC and then I get an error. When I turn on the screen of the HD Touch HD and then place a call on my JVC everything works fine. The problem seems to be, that the screen of the phone doesn't turn on when I place a call. When I dial a number on my phone, everything works fine.
I hope that someone has an answer to these problems.
I thought the problems had to do with the JVC but now I have my doubts.
Today I removed my bluetooth-connection and tried to make a new connection between my HTC Touch HD and the JVC KW-NX7000 radio/navigation in my car. On top of the screen of the HTC I saw two icons appear. (Left from the 3G icon)
I was surprised to see everything work, even though it was just for a short period. I could place a call from my JVC, the screen on my HTC turned on, the number was dialed and I got connected. At some point 1 of the 2 icons disappeared and again I wasn't able to make any calls from my JVC. The problem has something to do with those 2 icons which (should) appear when you make a bluetooth connection. I hope that somebody can help me with my problem.
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
james00000007 said:
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
Click to expand...
Click to collapse
Got excactly the same problem. Tried A2DPToggle but that thoes not work on my T-HD. Hope someby knows a tool or an answer for this.
absolutely agree , bluetooth is buggy !!!
sometimes I am loosing the connection to my car , sometimes it worked fine for hours , sometimes only for minutes
if I am listening to music (ds980) and receive a call, the connection to hear music is lost after closing the call
if I have some longer calls, sometimes the connection drops
so at the moment bluetooth @ HD is absolutely not stable !
buggy BT still happening?
Had issues with Nokia E71 randomly dropping/reconecting BT ... sometimes dropping during a call ... sold it on eBay
Brought Omnia i900 - Voice over BT headset does not work ... (but now a fix has been found over at modaco.com so happy)
was seriously looking at touch HD but will not if this thread is correct as sick of paying out good $$$ and finding a must have feature is not working
Q. has a fix been found or is BT still buggy
thanks
Bluetooth Problem
I think the problem may have something to do with multi-function devices (make and receive calls + stream music) I'm having problems with my Jabra
SP700 ,pairs no problem , 2 icons in top bar , can make calls and play music. Switch off phone or Jabra and then reconnect I can only make calls, no music, even though the 2 icons are displayed in top bar. I also have a Sony Erricson external speaker and a pair of Sony headphones both of which work fine no problem. Is this something that can be fixed with updated bluetooth drivers for HD?
Hi all,
I have the Pioneer CD-BTB200 connected to my car stereo (Pioneer DEH-P6900IB) and cannot connect my X1 to it..
I have searched and found this thread: http://forum.xda-developers.com/showthread.php?t=344216 but the posted solution does not work for me.. I installed total commander on the X1 and looked in the registry for the BT channel of my paired K800i (that can communicate with the BTB200) and tried it with that channel as well without success..
The BT module seems to recognise the phone but gives error message (just displays: ERROR ) when trying to pair the 2 (the 4 digit code I'm using is correct).
Can anybody help me? Would love to be able to make hands free calls again over the car stereo..
*BUMB*
Nobody has a solution? Plz help me out here guys!
I have a Pioneer bluetooth car stereo and when going through the pairing process, I enter the pin number on the x1 and the phone accepts the pairing, the stereo then says "Error". However, i gave it a few seconds and it will eventually paired. I then register the phone on the stereo so it will automatically pair. Now everything works perfectly, better than my Nokia e71 and N95 as these refuse to Auto connect at all.
Nope, doesn't do the trick for me.. I have waited for like 5 minutes withthe ERROR messages in the screen, but it doesn't get past that..
Anyone have any ideas on how to solve this problem?
I have the same Pioneer BT module and also get an error with my Samsung i750. However, after I register the phone with the car unit and then make a few calls from the handset, the phone eventually connects and stays connected until I shut down the car. I was hoping that with X1 I won't have to deal with it anymore, but I guess no such luck Anyway, I think the Pioneer BT unit is very particular and only works with a few approved handsets, I would change the BT unit if I could to something better..
I have the same Pioneer BT module and also get an error with my Samsung i750. However, after I register the phone with the car unit and then make a few calls from the handset, the phone eventually connects and stays connected until I shut down the car. I was hoping that with X1 I won't have to deal with it anymore, but I guess no such luck Anyway, I think the Pioneer BT unit is very particular and only works with a few approved handsets, I would change the BT unit if I could to something better..
Hello
I am trying to get my Hero to connect with my Lexus RX400h's bluetooth car-kit. I can pair the Hero with the car but it will not reconnect. Is there a way to authorize the Hero to alway reconnect without having to re-pair?
Any help would be great.
Thanks
Jon
It should remember it. I've never had a problem with my own bluetooth kit.
I get paired but not connected with my thb bury kit there are lots of posts on here about bluetoth issues 5 series bmws also have problems, htc support say they are waiting for an update from google
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Toyota TNS 510 carkit wont work either. It pairs ok, it even pairs the A2DP system. When pairing is finished a little message appears on the phone saying there was a problem with the bluetooth handfree thingy.
andy2111 said:
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Click to expand...
Click to collapse
What model year is your RRS ? My MY08 D3 works fine with the Hero... contact list navigation is far better than my 'old' Nokia N85. If your RRS is pre MY2008 there is an ECU update for the Bluetooth PTI I believe.
I'll add a Jaguar XF to the list. Hero will pair ok, then it will disconnect. it will disconnect a few times before it settles down. Whenever it tries to auto-connect, it will disconnect 2 or three times before it stays connected. sometimes it wont connect at all, a quick disable, then re-enable of bluetooh on the hero then gets it to connect again.
Didnt have any problems with any BlackBerry's, Touch Diamond, Nokia e52. Looks like we're waiting on Google for a fix. I wonder if their continual beta policy applies to updates as well as full blown applications?
Peugeot 407 SW ('07)- Pairing okay, connects okay too. On phone call the radio is muted, call picked up (on incoming), but the sound keeps coming through ear piece for 4-5 sec and then it eventually switches to speakers.
HTC cust support not very supportive... pointing me to go to the car manufacturer for support... :s
The Hero and/or Android does not support the bluetooth stack's remote Sim Access Profile (rSAP/SAP) required by many car kits (VAG, Lexus etc.). This might be the issue here.
http://en.wikipedia.org/wiki/Bluetooth_profile#SIM_Access_Profile_.28SAP.2C_SIM.29
Let your car do the pairing
Turn bluetooth on your phone and let your car discover and pair with the phone. Your carkit will suggest the passcode enter it in you phone and not the other way arround. That might work, It did for my Porshe.
How do you transfer bluetooth contacts??
Hi. I have my bluetooth car kit working fine, it is with a pioneer head unit. At first i would have to manually connect it, as the phone can only be made visible fo 120 seconds. Hoever after doing this 5 or 6 times, it then automatically conected every time. Just keep trying and see if it eventually does it.
Also.... How do you transfer your contacts lists to the bluetooth device?? I cannot find anyway!! please help!!
No Go on the Mazda 3
just bought a 2010 Mazda 3 sport and the bluetooth does not work with hero.
it pairs with the phone and then occasionally connects. however when you dial a number by voice or keypad the system in the car locks up completely for about 4 mins. tried other phones and works perfect.
Strange thing is it did work once for a day but then went all haywire after that.
would rooting the phone and installing a different rom open up the bluetooth any more so it can communicate better.
Dont want to get rid of the phone but unless i can find a remedy im gonna have to get a different phone.
I have Lexus ES350 2007, It's paired and auto connect with no issue! I have a tiny issue with incoming call in navi screen it display "not supported" instead of caller name!
Also it ringing in my Hero for 4 seconds then it ringing in my car?!
Thanks
Sorted
Well ive sorted th bluetooth problem.
once paired as long as i dont turn off bluetooth on the phone then it connects / reconnects just fine. if i do turn bluetooth profile off then when pairing i need to make phone visible before i get in the car and it picks it up again.
sorted.
2010 Mazda 3 and HTC Hero Bluetooth
Have the exact same problem as Wingy999 and if I leave the bluetooth switched on on the phone I have no problem.
But if I do switch it off/restart the phone, even if I make the phone visible when I get in the car, it does not connect and I have to delete and repair the phone to the car.
Can you help wingy999?
Yes/No
Well its a case of Yes it is and No it isnt.
Sometimes, for a few days i have no problems with phone. Then for no reason it decides to connect (picture of the phone on dash) but it cant communicate with the car. So when you dial it just hangs the system.
Got sick of pairing it to be honest so have left it for now. i wondering if rooting the phone might be a way forward.
yeah, no clue if rooting will help, but im def waiting for it to be possible. lots of cool things that can be done.
the bluetooth problem is to do with the android bluetooth api itself from what i understand. google haven't figured it out entirely yet and so only released it with basic functionality. even once modders are able to get inside the cdma hero, i dont think they can get at the low level bluetooth functionality and make changes. I could be wrong, but if it were the case, we'd see things like obex object transfer available on the GSM Hero's already.
I also have the same problem with my 2010 Mazda 3 and my sprint HTC hero.
I am probably going to have to return the phone. I was hoping for an update or a fix.
It is critical that the bluetooth feature works.
Another annoyance is that I cannot turn the bluetooth streaming audio. Even though the car and phone both have this feature, I do not want it on. I want to be able to turn on bluetooth for phone but not bluetooth streaming audio.
The HTC touch pro 2 (windows mobile) could turn each of the 2 bluetooth services off independently (and worked for both), the HTC Hero does not allow this (and doesn't work with the car anyway).
Huge thumbs down for an otherwise great phone.
My issue is with a Jabra SP700 Bluetooth speakerphone. My phone is paired, is detected and the phone even says 'Bluetooth Headset Connected'.
However, sound is not routed to the speakerphone, it just comes out of the phone speaker...
FYI I'm running MCR 2.8.
BMW 1 series 08 and HERO
Before I buy an HTC Hero does anyone know if it will work with my BMW 1 series
I'm having much fun with my new Legend, and I love android 2.1!
Everythings goes smooth except the connection with my car.
I have a pretty new Audi TT from 2008, and with my old phone (t-mobile G1), I used it without a problem for over a year.
One month ago I bought the Legend, and bluetooth connection to the car seems to hang!, Even when I disable bluetooth, the phone becomes slow, and the bluetooth icoon keeps displaying in my notification erea.
One thing works, when I reset the phone, I can use the carkit for about 10 minutes, then it starts to disconnect. The adress book never syncs.
Can people please reply if they got their legend work properly with their bluetooth car kit.
Also when other people have problems, please reply here!
Thnx
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Same problem here. Kenwood DDX7029 with BT. 5 out of 10 times the phone won't connect when starting the car. Dis- and enabling BT does the trick.
David67 said:
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Click to expand...
Click to collapse
This implies that if you disable data-roaming, it would work all the time?, I'm gonna try that out! Thanks for your reply!
Hi there. My first post in XDA
So cool that I found this thread because I have the exact same problem. I have an Audi A3 and the bluetooth connection is 9 out of 10 times lost during conversations and then the bluetooth icon just hangs until I boot the phone.
I'm gonna try to disable the data-roaming and see whether it works.
Still problem carkit/bluetooth Legend!!
Hi all,
I still/also experience problems with my Audi A4 carkit.
Also my colleague with a Opel Insignia experiencing the same problems.
I have to reset the bluetooth or reboot the phone te fix it
It is very annoying when you loose the bluetooth connection within a call.
I have already sent a message to HTC...and still waiting!
Switching off the data roaming or fix the UMTS/GSM settings doesn't help
Somebody a sollution?
Br Dide
Audi UHV 6654 problems
I have a BIG problem with this car kit connection...BIG means the device is useless till now.
I've paired the Legend with my A4 factory car kit and there are several problems:
1. No sounds come from the speakers (car speakers), still the michrophone is working fine. I had to put the phone on loudspeaker to hear something but of course this is not the normal way of using a car kit
2. There is no sound till the call is actually ongoing (the other party respond)...that means no ringing, busy tone, or whatsoever sound... I don't even know if the call is made if I'm not looking to the phone (and if it's entering power saving mode, I stare at a blank screen).
I don't have any problems of this kind using a Nokia phone and also they (especially point 2) are happening with all smartphones I've tried (WinMo or Android ones).
Is there any software (even a paid one) to outcome this?
Please don't tell me to "try" this and that, I don't want to spend money "trying" things...I would appreciate if someone had a similar problem and managed to solve it somehow.
P.S The phone is brand new (got it for 2 days by now) and it is not rooted.
P.S.2 The car kit is a "basic" one, don't have navigation, contacts downloading and all that stuff...It's a plain BT car kit, I would just like to be able to make and receive phone calls with it.
Seems like many have bad experience in making the legend and car kit work together.
As of yet I could only pair my legend with my blaupunkt audio system, but they have not yet connected each other successfully to make use of the bluetooth feature. I've had no problem at all using my audio set with my samsung galaxy spica's bluetooth. So it probably is not an android issue.
Is there anyone who didn't experience any such trouble with their legend and car audio system's bluetooth ?
To add some more details...
I search for BT devices, phone finds the Audi UHV car kit. Then I'm asked for the pairing password and I enter it, than I get that "connection sound" from the car speakers but the phone is still "connecting..." endlessly. The BT icon on the phone appears but is the standard one, no headset or car kit icon appears (does it have such an icon after all?)
From here...nothing special happens. When I make or receive a call only the phone is ringing, no sounds came from the car speakers. Only when the call is connected, then I have the bord computer showing "Call..." and the radio/CD is muted...and that's all. The conversation can be heard only into the phone not from car speakers as it was the case with the ringing tone before. When call ends, music resumes.