Hi all,
I have the Pioneer CD-BTB200 connected to my car stereo (Pioneer DEH-P6900IB) and cannot connect my X1 to it..
I have searched and found this thread: http://forum.xda-developers.com/showthread.php?t=344216 but the posted solution does not work for me.. I installed total commander on the X1 and looked in the registry for the BT channel of my paired K800i (that can communicate with the BTB200) and tried it with that channel as well without success..
The BT module seems to recognise the phone but gives error message (just displays: ERROR ) when trying to pair the 2 (the 4 digit code I'm using is correct).
Can anybody help me? Would love to be able to make hands free calls again over the car stereo..
*BUMB*
Nobody has a solution? Plz help me out here guys!
I have a Pioneer bluetooth car stereo and when going through the pairing process, I enter the pin number on the x1 and the phone accepts the pairing, the stereo then says "Error". However, i gave it a few seconds and it will eventually paired. I then register the phone on the stereo so it will automatically pair. Now everything works perfectly, better than my Nokia e71 and N95 as these refuse to Auto connect at all.
Nope, doesn't do the trick for me.. I have waited for like 5 minutes withthe ERROR messages in the screen, but it doesn't get past that..
Anyone have any ideas on how to solve this problem?
I have the same Pioneer BT module and also get an error with my Samsung i750. However, after I register the phone with the car unit and then make a few calls from the handset, the phone eventually connects and stays connected until I shut down the car. I was hoping that with X1 I won't have to deal with it anymore, but I guess no such luck Anyway, I think the Pioneer BT unit is very particular and only works with a few approved handsets, I would change the BT unit if I could to something better..
I have the same Pioneer BT module and also get an error with my Samsung i750. However, after I register the phone with the car unit and then make a few calls from the handset, the phone eventually connects and stays connected until I shut down the car. I was hoping that with X1 I won't have to deal with it anymore, but I guess no such luck Anyway, I think the Pioneer BT unit is very particular and only works with a few approved handsets, I would change the BT unit if I could to something better..
Related
Hello,
does anyone here drive a recent BMW that has the Bluetooth phone interface (essentially a bluetooth headset built into the car)? If yes, are you able to use it with an XDA-II?
I can't seem to bond the device with the car - the phone thinks it's done it, but the car just shows "BLUETOOTH PAIRING" and when I try to place a call the phone asks for the passkey and goes through what seems like a successful pairing process - but it does not actually work. The "BMW ULF wants to bond, enter passkey" message keeps appearing and appearing after every seemingly successful bonding attempt.
Anyone?
Marton
bmw bt
with the kind of money you paid for that car, the salesman should come over and do the pairing for you.
I remember reading somthing on this subjet on the forum.
Search the forum:
http://forum.xda-developers.com/viewtopic.php?t=4258&highlight=bmw
http://forum.xda-developers.com/viewtopic.php?t=3981&highlight=bmw
http://forum.xda-developers.com/viewtopic.php?t=5029&highlight=bmw
cheers
Thanks guys! I guess I'm out of luck then.
I tried to use a spare Nokia 6600 I had lying around and I got a bit further, but it's still unusable. The Nokia bonds perfectly, I can call with the car's interface, incoming calls ring in the car's speakers - but whenever the call is answered only the phone's speakers and mic work...
Apparently not only does the XDA-II not support the handsfree profile (if you think about it, why should it? it would be a surprise if ANYTHING BT-related worked on it) but the Nokia 6600 is screwed up too.
I guess I'll have to get a Nokia 6310. That's one of the the recommended phones by BMW:
http://www.circlebmw.com/parts/blue/phones.htm
I just thought that since I had a "universal phone kit" in the car it was supposed to work with any recent BT phone. Universal? That list above is shockingly short.
Have you installed the latest version of bluetooth tools?
Well, Bluetooth tools actually made things worse. It still wouldn't bond correctly with the car, but after that it kept connecting and re-connecting to my PC every few seconds, even when BT was off! (It seemed to turn itself on automatically after a few minutes.) The TDK systray notification was driving me crazy. Getting rid of BT Tools solved this partucular problem.
How is the new MDA-II ROM (1.72) in regards to Bluetooth? I hear that some bonding problems have been solved - is the handsfree profile supported yet? I'm tempted to upgrade but given that it's just a beta and it's hard to go back if I end up disliking it is discouraging.
Hi, I was able to pair my x1 to my pioneer headunit in my car and get the a2dp to work, but say when I leave the car and it d/c as it should, it does not automatically reconnect when i start the car again like it should, I have to manually go into the settings and set wireless stereo again. Anybody know a solution to this? I am used to my old phone just automatically connecting everytime I start the car. Phone is visible also.
Hi, can I ask how you get your pioneer unit to work with X1? I've tried pairing my Pioneer unit to my X1 and it doesn't connect. Btw, I want to use my unit for handsfree calling. Thanks.
lunguyen said:
Hi, I was able to pair my x1 to my pioneer headunit in my car and get the a2dp to work, but say when I leave the car and it d/c as it should, it does not automatically reconnect when i start the car again like it should, I have to manually go into the settings and set wireless stereo again. Anybody know a solution to this? I am used to my old phone just automatically connecting everytime I start the car. Phone is visible also.
Click to expand...
Click to collapse
Search this forum for A2DPtoggle and you will find a program to easily connect A2DP bluetooth stereo.
Hello
I am trying to get my Hero to connect with my Lexus RX400h's bluetooth car-kit. I can pair the Hero with the car but it will not reconnect. Is there a way to authorize the Hero to alway reconnect without having to re-pair?
Any help would be great.
Thanks
Jon
It should remember it. I've never had a problem with my own bluetooth kit.
I get paired but not connected with my thb bury kit there are lots of posts on here about bluetoth issues 5 series bmws also have problems, htc support say they are waiting for an update from google
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Toyota TNS 510 carkit wont work either. It pairs ok, it even pairs the A2DP system. When pairing is finished a little message appears on the phone saying there was a problem with the bluetooth handfree thingy.
andy2111 said:
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Click to expand...
Click to collapse
What model year is your RRS ? My MY08 D3 works fine with the Hero... contact list navigation is far better than my 'old' Nokia N85. If your RRS is pre MY2008 there is an ECU update for the Bluetooth PTI I believe.
I'll add a Jaguar XF to the list. Hero will pair ok, then it will disconnect. it will disconnect a few times before it settles down. Whenever it tries to auto-connect, it will disconnect 2 or three times before it stays connected. sometimes it wont connect at all, a quick disable, then re-enable of bluetooh on the hero then gets it to connect again.
Didnt have any problems with any BlackBerry's, Touch Diamond, Nokia e52. Looks like we're waiting on Google for a fix. I wonder if their continual beta policy applies to updates as well as full blown applications?
Peugeot 407 SW ('07)- Pairing okay, connects okay too. On phone call the radio is muted, call picked up (on incoming), but the sound keeps coming through ear piece for 4-5 sec and then it eventually switches to speakers.
HTC cust support not very supportive... pointing me to go to the car manufacturer for support... :s
The Hero and/or Android does not support the bluetooth stack's remote Sim Access Profile (rSAP/SAP) required by many car kits (VAG, Lexus etc.). This might be the issue here.
http://en.wikipedia.org/wiki/Bluetooth_profile#SIM_Access_Profile_.28SAP.2C_SIM.29
Let your car do the pairing
Turn bluetooth on your phone and let your car discover and pair with the phone. Your carkit will suggest the passcode enter it in you phone and not the other way arround. That might work, It did for my Porshe.
How do you transfer bluetooth contacts??
Hi. I have my bluetooth car kit working fine, it is with a pioneer head unit. At first i would have to manually connect it, as the phone can only be made visible fo 120 seconds. Hoever after doing this 5 or 6 times, it then automatically conected every time. Just keep trying and see if it eventually does it.
Also.... How do you transfer your contacts lists to the bluetooth device?? I cannot find anyway!! please help!!
No Go on the Mazda 3
just bought a 2010 Mazda 3 sport and the bluetooth does not work with hero.
it pairs with the phone and then occasionally connects. however when you dial a number by voice or keypad the system in the car locks up completely for about 4 mins. tried other phones and works perfect.
Strange thing is it did work once for a day but then went all haywire after that.
would rooting the phone and installing a different rom open up the bluetooth any more so it can communicate better.
Dont want to get rid of the phone but unless i can find a remedy im gonna have to get a different phone.
I have Lexus ES350 2007, It's paired and auto connect with no issue! I have a tiny issue with incoming call in navi screen it display "not supported" instead of caller name!
Also it ringing in my Hero for 4 seconds then it ringing in my car?!
Thanks
Sorted
Well ive sorted th bluetooth problem.
once paired as long as i dont turn off bluetooth on the phone then it connects / reconnects just fine. if i do turn bluetooth profile off then when pairing i need to make phone visible before i get in the car and it picks it up again.
sorted.
2010 Mazda 3 and HTC Hero Bluetooth
Have the exact same problem as Wingy999 and if I leave the bluetooth switched on on the phone I have no problem.
But if I do switch it off/restart the phone, even if I make the phone visible when I get in the car, it does not connect and I have to delete and repair the phone to the car.
Can you help wingy999?
Yes/No
Well its a case of Yes it is and No it isnt.
Sometimes, for a few days i have no problems with phone. Then for no reason it decides to connect (picture of the phone on dash) but it cant communicate with the car. So when you dial it just hangs the system.
Got sick of pairing it to be honest so have left it for now. i wondering if rooting the phone might be a way forward.
yeah, no clue if rooting will help, but im def waiting for it to be possible. lots of cool things that can be done.
the bluetooth problem is to do with the android bluetooth api itself from what i understand. google haven't figured it out entirely yet and so only released it with basic functionality. even once modders are able to get inside the cdma hero, i dont think they can get at the low level bluetooth functionality and make changes. I could be wrong, but if it were the case, we'd see things like obex object transfer available on the GSM Hero's already.
I also have the same problem with my 2010 Mazda 3 and my sprint HTC hero.
I am probably going to have to return the phone. I was hoping for an update or a fix.
It is critical that the bluetooth feature works.
Another annoyance is that I cannot turn the bluetooth streaming audio. Even though the car and phone both have this feature, I do not want it on. I want to be able to turn on bluetooth for phone but not bluetooth streaming audio.
The HTC touch pro 2 (windows mobile) could turn each of the 2 bluetooth services off independently (and worked for both), the HTC Hero does not allow this (and doesn't work with the car anyway).
Huge thumbs down for an otherwise great phone.
My issue is with a Jabra SP700 Bluetooth speakerphone. My phone is paired, is detected and the phone even says 'Bluetooth Headset Connected'.
However, sound is not routed to the speakerphone, it just comes out of the phone speaker...
FYI I'm running MCR 2.8.
BMW 1 series 08 and HERO
Before I buy an HTC Hero does anyone know if it will work with my BMW 1 series
Trying to pair my HD2 with my Pioneer DEH-P710BT and neither device will recognize the other after numerous attempts to follow each of the owner's manuals. Both have Bluetooth switched on and are discoverable and this just worked with my old iPhone on the first try. Is there a trick to this or something I'm missing? Anyone been successful pairing an HD2 to a Pioneer headunit? Thanks!
I have a sony xplod and it works fine with my HD2. You want to put your stereo into pairing mode and search for it with your phone, like you would with a bt headset.
I have the exact same model and I've experienced endless frustration trying to get it to work seamlessly with the HD2. My Blackberry has no issues with the connection to the DEH-710BT radio. There seems to be an issue with the devices establishing a connection, however when they do finally connect it stays reliable for as long as the radio is on.
Going through the Bluetooth settings in the HTC Sense menu often causes the connections to be reset and not work without a number of repairing attempts. Eventually it will work, but its taken me up to 10 minutes to get A2DP and the headset profile to work together.
There are some posts about people having issues with other car stereos and registry settings that are supposed to help. I've tried the registry settings without success in having the devices fully automatically connect.
After playing with the devices for a while, I've gotten it so that the devices 100% of the time automatically connect with the headset profile, however I cannot get them to automatically connect with the A2DP profile. The reliable work-around I've found is after I start my car, I go to Start->Settings->Bluetooth and then click on Stereo Audio under the Pioneer Device. While a bit of a pain, it isn't nearly as bad as trying to use the HTC Sense menu.
Dave
speoples20: You're exactly right, my headunit would not find the HD2 but the HD2 found the headunit (took me 5 tries before I got a successful pairing). Thanks!
dmattox: Thanks for the heads up about the A2DP situation, I don't have music loaded on the device yet since I use thumb drives but I'll have to try it out and report back if I have better luck. It is cool that the A2DP feature is there, I don't believe this was supported on the iPhone.
I currently run a Pioneer AVIC-D3 using the Pioneer CD-BTB200 bluetooth module.
I have no issues with connecting my HD2 (and previously my Touch Pro2) to my head unit for both voice and bluetooth stereo.
ruinertt said:
I currently run a Pioneer AVIC-D3 using the Pioneer CD-BTB200 bluetooth module.
I have no issues with connecting my HD2 (and previously my Touch Pro2) to my head unit for both voice and bluetooth stereo.
Click to expand...
Click to collapse
I have the AVIC Z110BT on my car and I connect the HD2 fine. I do have to do it from the HD2 and not the AVIC unit as opposed to when I had my iphone, but my HD2 connects flawlessly and I can use BT for Audio without any skip. My iphone used to skip every 30 seconds when I played it with the BT Audio connection. I have Energy Rom on my phone, but it worked all the same when I had stock rom as well.
I'm having much fun with my new Legend, and I love android 2.1!
Everythings goes smooth except the connection with my car.
I have a pretty new Audi TT from 2008, and with my old phone (t-mobile G1), I used it without a problem for over a year.
One month ago I bought the Legend, and bluetooth connection to the car seems to hang!, Even when I disable bluetooth, the phone becomes slow, and the bluetooth icoon keeps displaying in my notification erea.
One thing works, when I reset the phone, I can use the carkit for about 10 minutes, then it starts to disconnect. The adress book never syncs.
Can people please reply if they got their legend work properly with their bluetooth car kit.
Also when other people have problems, please reply here!
Thnx
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Same problem here. Kenwood DDX7029 with BT. 5 out of 10 times the phone won't connect when starting the car. Dis- and enabling BT does the trick.
David67 said:
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Click to expand...
Click to collapse
This implies that if you disable data-roaming, it would work all the time?, I'm gonna try that out! Thanks for your reply!
Hi there. My first post in XDA
So cool that I found this thread because I have the exact same problem. I have an Audi A3 and the bluetooth connection is 9 out of 10 times lost during conversations and then the bluetooth icon just hangs until I boot the phone.
I'm gonna try to disable the data-roaming and see whether it works.
Still problem carkit/bluetooth Legend!!
Hi all,
I still/also experience problems with my Audi A4 carkit.
Also my colleague with a Opel Insignia experiencing the same problems.
I have to reset the bluetooth or reboot the phone te fix it
It is very annoying when you loose the bluetooth connection within a call.
I have already sent a message to HTC...and still waiting!
Switching off the data roaming or fix the UMTS/GSM settings doesn't help
Somebody a sollution?
Br Dide
Audi UHV 6654 problems
I have a BIG problem with this car kit connection...BIG means the device is useless till now.
I've paired the Legend with my A4 factory car kit and there are several problems:
1. No sounds come from the speakers (car speakers), still the michrophone is working fine. I had to put the phone on loudspeaker to hear something but of course this is not the normal way of using a car kit
2. There is no sound till the call is actually ongoing (the other party respond)...that means no ringing, busy tone, or whatsoever sound... I don't even know if the call is made if I'm not looking to the phone (and if it's entering power saving mode, I stare at a blank screen).
I don't have any problems of this kind using a Nokia phone and also they (especially point 2) are happening with all smartphones I've tried (WinMo or Android ones).
Is there any software (even a paid one) to outcome this?
Please don't tell me to "try" this and that, I don't want to spend money "trying" things...I would appreciate if someone had a similar problem and managed to solve it somehow.
P.S The phone is brand new (got it for 2 days by now) and it is not rooted.
P.S.2 The car kit is a "basic" one, don't have navigation, contacts downloading and all that stuff...It's a plain BT car kit, I would just like to be able to make and receive phone calls with it.
Seems like many have bad experience in making the legend and car kit work together.
As of yet I could only pair my legend with my blaupunkt audio system, but they have not yet connected each other successfully to make use of the bluetooth feature. I've had no problem at all using my audio set with my samsung galaxy spica's bluetooth. So it probably is not an android issue.
Is there anyone who didn't experience any such trouble with their legend and car audio system's bluetooth ?
To add some more details...
I search for BT devices, phone finds the Audi UHV car kit. Then I'm asked for the pairing password and I enter it, than I get that "connection sound" from the car speakers but the phone is still "connecting..." endlessly. The BT icon on the phone appears but is the standard one, no headset or car kit icon appears (does it have such an icon after all?)
From here...nothing special happens. When I make or receive a call only the phone is ringing, no sounds came from the car speakers. Only when the call is connected, then I have the bord computer showing "Call..." and the radio/CD is muted...and that's all. The conversation can be heard only into the phone not from car speakers as it was the case with the ringing tone before. When call ends, music resumes.