:?
Hi.
I'm trynig to unlock my XDA with the XDAUnlock tool, but nothing seems to work. When I run the tol I recieve a message "Error getting unlock code".
I also tried t use the xda2unlock Ver 2.2 but it doesn't work eiter (maybe because i'm using it on a Windows 98SE?). It gives me a message saying "Stat of repair process..." and on the next line:
"DeviceIOControl('COM2:' 0xAAAA5679L)"
and stops there. Can anyone help me get my device unlocked?
Thanks.
You could try xda manipulator and a serial cable, the other way is to load se 1.2 rom.
xda2unlock is for the xda 2.
You have to use xdaunlock with a rom incluuding the wmodem application, or use the xdamanipulator and a serial cable.
HTH
Stefan
Related
Hi,
I tried to update Radio Stack on my O2 xda ... After confirming to copy files needed to upgrade my xda restarted and began to upgrade. Suddenly it asked me for the my Pin SIM Card and then hanged !
My bootmenu in ver. 5.15 is accessible, but it shows Gsm Error.
I have also another O2 Xda and I tried to copy through Bootloader "WinCe + Boot to SD" from good xda and restore on my "broken" xda.
But the problem is still ...
I don't have a serial cable to copy&restore "GSM to SD".
How can I repair my O2 Xda ? Is there any way ?
O2 XDA doesn't work after radio stack update
Hi,
I am new owner of O2 Xda and have the same problem.
Maybe anyone help Us ...
I am waiting for the solution and very special thanks for fast reply. :lol:
Hi there
Try to execute the file on your device \\Windows\RSUpgrade.exe. After executing it flashes the radio ROM. If it works, you have the old (but the working) version.
I did this and I could switch back to the previous Radio Stack version.
Good Luck!
I cannot do nothing on my xda, because after turning it on I have white screen with "blue line" on the top.
Your xda is toast. Ring O2 and get it replaced under warranty.
ok i have a siemens sx56, i think version 3.14 software, i bought a serial cable off ebay, and tried to use the xda manipulator, the pda tried connecting but with no avial the software was saying searchign com ports, i followed the direction on this site, of softe resetting and wat not, didnt work, so i downlaoded xda unlock, i managed to tranfer that o my phone, said error findin lock code, wat should i do now, shold i ugrade with the special edition rom, will tha xda manipulator work than, i just need to get it unlocked, but i would liek to reset the call timers and change the imei because i foudn this phone. please let me thank guys
i am dumb my rom verios is 3.14.03 eng, radio version 6.12, protocol 324e4, i cant use xda manipulator, tried xda unlock says 'error getting unlock code' , tried to install rom but it says i have to have the power cord and serail cable connected at the same time, which is impsobile because the are the same port, unless i buy a usb if that does both from whati heard, so wat should i do, help me out guys, thanks
I would be appreciated if you could tell me the steps to unlock a sx56 Siemens with the A.20.17, the steps listed didn't wokr for me. I downloaded xda2unlock and followed the steps.
First, when I exe bootloader and palced it in the craddle, type "yes", then the screen dissappear. I then rest my sx56, placed in the craddle, disable the usb cabl;en and typed yes.
It was taking for ever to read block 1 like 30' so I aborted the action.
Any help would be appreciated, you guys are great!
Hi ...
If your device is SX56 which means it's XDA I, why did you use the XDA2unlock that is for XDA II ???
The right tool is here www.xda-developers.com/XDAunlock/
i am so confused i have a att siemens sx56 everything i have tried to unluck this thing hasnt worked i dont know if im missing a step or what. i as well have tryed to cody the file and as well dont work my wallarby bootloader says v5.22 and doesnt display a usb or gray its 4 colors with the walleraby bootloader v5.22 help help
Soundman, you can copy xdaunlock to your sx56 then you can navigate to the file and execute it, if that fails and you have a serial cable for your pda you can use xda manipulator, failing that you can flash your rom with the special edition rom.
how
how do i copy the file to my pda i dont have a serial just a usb
not having any luck
im not haveing and luck at all
still not working
help im still not work
My Friend give me XDA1 with complete problem :
1. Broken Wallaby Bootloader
When i check bootloader with soft reset while push power, i cant go to Wallaby menu ( he said he use wallaby 5.15), i use xdatools but but works.
2. Broken ROM 3.20 ( White screen) but i can handle.
3. RSU error in 1% ( RSU use 4.21) i try to downgrade but still error in 1%.
i just confusion about the broken wallaby Bootloader ... any trick to make normal ?????? please...
Well, i think you must send it to the customer support.
Without the Bootloader you can't flash anything. :-/
Or am I in error?
Have a look at this thread, may be it will help:
"Here is a pnewbootloader for ROM version 4.01.16"
@hatamata:
But how you could flash a rom without functionally software at device?
any other tools??
i did use pnewbootloader for ROM version 4.01.16 , xdatool etc but i thingk i have same error with another user. i can't use this tools, how can use cause always error. Anyone can learn to use that tools??
For note this XDA can come to todays menu (i repair with xda repair), can connect with USB .., but i can't repair RSU but first time i thingk i must repair Wallaby Bootloader
@satya:
Well, thats a f**k!
See here: http://forum.xda-developers.com/viewtopic.php?t=11534
RSU seemed to be an big problem! :-(
@ luckyfreddy
i have some experiance to repair RSU error in 1 %, maybe i can use downgrade or burn with SD (if i have Wallaby Bootloader) etc.
The BIG Problem now i can't use the Wallaby .....