ok i have a siemens sx56, i think version 3.14 software, i bought a serial cable off ebay, and tried to use the xda manipulator, the pda tried connecting but with no avial the software was saying searchign com ports, i followed the direction on this site, of softe resetting and wat not, didnt work, so i downlaoded xda unlock, i managed to tranfer that o my phone, said error findin lock code, wat should i do now, shold i ugrade with the special edition rom, will tha xda manipulator work than, i just need to get it unlocked, but i would liek to reset the call timers and change the imei because i foudn this phone. please let me thank guys
i am dumb my rom verios is 3.14.03 eng, radio version 6.12, protocol 324e4, i cant use xda manipulator, tried xda unlock says 'error getting unlock code' , tried to install rom but it says i have to have the power cord and serail cable connected at the same time, which is impsobile because the are the same port, unless i buy a usb if that does both from whati heard, so wat should i do, help me out guys, thanks
Related
Hi Xda Developers i have a T-Mobile Pocket PC Phone Edition and i need to unlock the phone so i can use it back home in the Middile East and here is the information about the phone
Rom Version : 3.08.10 ENG
Radio Version: 6.02
Wallaby Bootloader 5.15
and i'm working on getting the serial cable from the website
http://datanywhere.net/Merchant2/merchant.mv?Screen=CTGY&Store_Code=DI&Category_Code=XDCCR
but i found there two types of serial cables
1-Serial AutoSync Cable for T-Mobile/O2 XDA Pocket PC Phone
2-RS-232 Serial Comm cable for PocketPC Phone
which one do i order for my device and would be appropriate and if i got everything needed would it work for that device and unlock my phone so i can use another SIM Card other than T-Mobile SIM Card
Can you please help me XDA Developers and thanks again for that Program and for the hard work.
I forgot to add that my country GSM network is 900Mhz and my device is 1900/900 Mhz so is it gonna work over there?
I can add that the Serial Cable on T-mobiles site worked fine for me, and I have the same settings as you on my XDA. All you have to do is just follow the simple instructions under the program download area and it takes like less than a minute. And yes thanks Guys, this program is great and really something to help us all Muc love to you all. lol
install everthing
installed evrything went on great looks great but it is still locked did the unlock program u have error getting unlock code please help everything else is sweet
i am so confused i have a att siemens sx56 everything i have tried to unluck this thing hasnt worked i dont know if im missing a step or what. i as well have tryed to cody the file and as well dont work my wallarby bootloader says v5.22 and doesnt display a usb or gray its 4 colors with the walleraby bootloader v5.22 help help
Soundman, you can copy xdaunlock to your sx56 then you can navigate to the file and execute it, if that fails and you have a serial cable for your pda you can use xda manipulator, failing that you can flash your rom with the special edition rom.
how
how do i copy the file to my pda i dont have a serial just a usb
not having any luck
im not haveing and luck at all
still not working
help im still not work
:?
Hi.
I'm trynig to unlock my XDA with the XDAUnlock tool, but nothing seems to work. When I run the tol I recieve a message "Error getting unlock code".
I also tried t use the xda2unlock Ver 2.2 but it doesn't work eiter (maybe because i'm using it on a Windows 98SE?). It gives me a message saying "Stat of repair process..." and on the next line:
"DeviceIOControl('COM2:' 0xAAAA5679L)"
and stops there. Can anyone help me get my device unlocked?
Thanks.
You could try xda manipulator and a serial cable, the other way is to load se 1.2 rom.
xda2unlock is for the xda 2.
You have to use xdaunlock with a rom incluuding the wmodem application, or use the xdamanipulator and a serial cable.
HTH
Stefan
i have an xda IIi an it say's serial v1.01 when i try to put it in the charger it say's usb v1.01 but activesync 4 will not detect it but it does connect to my pc without activesync but i can't install any thing on it. i have downloaded the original software from the o2 website but the installation instructions say it needs to be connected to activesync. what do i do
Hmm...Seem to me you are in bootloader mode serial connection version 1.01 .. Try checking the buttom. As this mode will only come if you press power+reset+navigator buttom.
i have tried soft reset and hard reset but i just can't do anything with it
chill..
download the rom image from o2 here is the link,
http://www.my-xda.com/xda2i_soft.html
put the device into bootloader and put into the cradle and let it do it's magic
simple!
PS, i problem like it i killed mine by messing up the rigistry i was screwed so i did that above and all was okay....main thing is not to panic always think u have the garuntee from o2 so u can take it back...so take it ez!
help me to break & solve this problem, maybe can also help the other members..
I tried to upgrade my XDA to WM2003SE everything goes right,
bootloader first time i still use v5.22
but when I soft reboot it freezes on the OZUP screen and
message ONLY FOR MICROSOFT bla bla bla....
i get this ROM from http://www.romkitchen.de/ ==> WM2003SE
then downgrade bootloader from v5.22 to v5.15,
using MMC (flash SD) continue to special rom 1.2,
and then cooked again using PC2002 by my own creation based from
romkitchen, what i want to ask is :
i cannot connect again via dekstop activesyn if i want to change
my ROM because my cradle cannot detect my charger?? but if i charge
directly, its work. What is the problem?
is my cradle/dekstop broken at the charger socket?
so what i need to do? just change the wire or socket or
i use the step like at http://wiki.xda-developers.com/index.php?pagename=WallabyCradleMod
if i prefer use the 2nd method, is that really OK? so just used cradle/deskstop, no need
power charger again if i want to change ROM to WM2003SE, because only can use via activesync?
after i change bootloader to v5.15, keep trying to change but only can via Flash SD Card,
i change to WM 2003 final, still same problem....after finish, only screen cannot enter the
menu or else, only boot screen until i am waiting for 15 minutes??? then change again to
WM2003 but using from http://www.romkitchen.de/tools, still same again....boot screen again...
haiyaaaa.....what happen?? i dont know, tired, always overtime to do this,hehehhee...
all my friends, help me...need your advice ^_^V
*now, i still used ROM from PC 2002,cooked again using PC2002 by my own creation based from romkitchen.
bootloader v5.15
Microsoft Pocket PC --> PC2002
Version 3.0.12039 (Build 11178)
ROM version : 3.17.03 ENG
ROM date : 05/15/03
Radio version : 6.24.00
Protocol version : 324e4
Model No.: PW10A1
I can not really help you, but i was also in the same situation, that i have had a device, that doesn´t work with any other ROM than PPC2002
Flashed several WM2003 ans the WM2003SE but non of them worked.
So i rest at PPC2002
Stefan
ow ow...
auch.. ok, thanks for the comment, i give-up,hehehe..but only for now,
take a rest first but i dont know for t'mrow, actually from 10 flashed,
i got 1 success, can got WM2003SE but with almost empty battery,
i know the inside and already set all, including i notice bluetooth icon,hehehe..
but how? i wonder that my sx56 with fake bluetooth, only icon
but after i charge my sx56 then i soft reset, its gone, back again with only boot-screen, after that, i can't find again WM2003SE ROM only lock with boot-screen, and ONLY FOR MICROSOFT..blablabla...
and about for my cradle/dekstop? how is it? can u give me solution to fixed it??
btw,thanks for helping, tips & trick hehehe...
i will keep trying to find/solved this problem by my own way ^_^V
modify my cradle/dekstop success
its working, i try to modify my cradle/dekstop with that steps (look at the top this thread), and it's work...actually not me who did it, but my friend,hehehehe....i ask his help and he agrre to doit, but all the risk is still at me, now i can charge and also syncronized to my notebook