Would it unlock ROM A.20.17? on a sx56 Siemens - MDA, XDA, 1010 Software Upgrading

I would be appreciated if you could tell me the steps to unlock a sx56 Siemens with the A.20.17, the steps listed didn't wokr for me. I downloaded xda2unlock and followed the steps.
First, when I exe bootloader and palced it in the craddle, type "yes", then the screen dissappear. I then rest my sx56, placed in the craddle, disable the usb cabl;en and typed yes.
It was taking for ever to read block 1 like 30' so I aborted the action.
Any help would be appreciated, you guys are great!

Hi ...
If your device is SX56 which means it's XDA I, why did you use the XDA2unlock that is for XDA II ???
The right tool is here www.xda-developers.com/XDAunlock/

Related

unlock MDA vario

Hallo Guru's,
I have a MDA vario fron T-mobile int the netherlands.
I would like to change from netherlands to english and
unlock the phone.
Can somebody link me up 'cos the topics are not helping.
I can't find lokiwiz on the forum to download.
Please help help help!!!
lokiwiz http://forum.xda-developers.com/viewtopic.php?t=33796
ROMs - ftp://xda:[email protected]/Uploads/HTC_Wizard/
thout was not all complete.
You need to unlock two things:
SIM lock to be able to use non-T-Mobile SIMs - use lokiwiz for this
CID lock to be able to flash with another (WWE instead of NLD) ROM - use aWizard for this
I did this and all works gr8 now
thout was not all complete.
You need to unlock two things:
SIM lock to be able to use non-T-Mobile SIMs - use lokiwiz for this
CID lock to be able to flash with another (WWE instead of NLD) ROM - use aWizard for this
I did this and all works gr8 now
Tankx guys for the reaction.
I have downloaded lokiwiz but it appears on the screen...
DO NOT DISCONNECT UNTIL PHONE REBOOTS...
But my phone doesn't reboot!!! When I manually
reboot the phone I get the message that it failed
because I disconnected it.
I have tried both U and C.....
I copied the files to the root C:\
What I'm I doing wrong?
George
Georgekw said:
Tankx guys for the reaction.
I have downloaded lokiwiz but it appears on the screen...
DO NOT DISCONNECT UNTIL PHONE REBOOTS...
But my phone doesn't reboot!!! When I manually
reboot the phone I get the message that it failed
because I disconnected it.
I have tried both U and C.....
I copied the files to the root C:\
What I'm I doing wrong?
George
Click to expand...
Click to collapse
I did that and that message was on my screen for about 5-7minutes I think, then something else came written up and in 30seconds the phone rebooted by itself. so maybe try again?
Hi Guys,
Despite the positive ractions on the forum
lokiwiz is not working for me.
I have given up...its so frustrating
Tankx though to all those who tried 2 help
Problem solved With the help of MOTIN
Hallo U all,
Motin deserves a big medal.
He has guided me through skype
and my MDA is unlocked now.
Big Tankx to u Motin
Re: Problem solved With the help of MOTIN
Georgekw said:
Hallo U all,
Motin deserves a big medal.
He has guided me through skype
and my MDA is unlocked now.
Big Tankx to u Motin
Click to expand...
Click to collapse
You should tell everyone what youve done wrongly so the same mistake won't happen again

CID unlock HTC Wizard

Hi,
I have a MDA Vario device which I would like to upgrade to the newest QTEK-rom. So, I have to CID-unlock the device which is not working out as it should be.
I already got the sim-unlock-code with lokiwiz03a after I manually copy-ed the enablerapi.cab to my phone.
I use lokiwiz02a for the CID-unlock but this fails with some kind of interal error and the device reboots, I have a screenshot of the error just before it reboots, it's here: http://www.bulls-with-spirit.nl/error.jpg
I hope you guys ca help me out with this!

O2 Orbit crashed after PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite upgrade attempt

HI all,
I'm desperate...
I recently bought an 02 Orbit that was supposed to be unlocked.
So I downloaded PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe, unpacked it and double clicked on UpgradeRom_P800W.bat
A dos installation routine started, then I performed a hard reset by pressing the softkeys + stylus reset.
and now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device doesn't boot :-(
I'm completely desperate... I had my Orbit working 1h only and now I still have my eyes to cry.
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device is connected....
I tried to enter the bootloader but I don't understand how I could do that (by the way what do you guys mean by the record button? where is it?)
Could someone explain me how I can recover my crashed device please ?
Thanks in advance
ok I've found the record button and managed to enter the bootloader (red-green-blue screen right?). But it doesn't help. My device is not recognise by my PC anymore, no connection.
The problem is that I didn't make the procedure on IMEICHECK because the vendor said my Orbit was already unlocked. I know, I'm stupid, I should have....
Anyway, now I've my 30€ UNL file,
I've edited a ROM with the hex program, I've change "BsaD5SeoA" with "IMEICHECK save exe file" (I told you I'm stupid, or I didn't exactly understood what you mean, because I don't have any IMEICHECK.exe file)
I tried to launch a ROM upgrade but my device still not be recognised by my computer, even in bootloader mode.
Same **** when I try to launch the C3v1Unlock, it says no device connected.
Please, if you have anything to help me......
After i read this THREAD who explain how to repair my problem ...But it dosent work for me
When i want to flash it, it tell me :
INVALID MODEL ID ,with : RUU_Artemis_DOPODASIA_WWE_LOVE_1.28.717.1_INFINEon gsm4.1.13.30_02.69.90_Cmp_Ship_R.exe
INVALID UPDATE TOLL ,with : _ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe
And after have made the TUTO !
Click to expand...
Click to collapse
I saw this post on an other thread... I am having the same problem... I bought artemis from ebay and the seller told me that it was unlocked... But i can't flash it with these ROMs... Did you find a solution? Is it really unlocked?
By the way when the window that tells me "INVALID MODEL ID" shows up at the bottom and to the right of the window there is i big number... Do you know what this is?
Same problem here
I have THE SAME problemhere. The same message on the boot screen. It seems that we are not able to use our XDA ORBIT ;( any more
At least we can download oreginal XDA Orbit english or German ROM OR if someone write RUU for Xda Orbit. Than would be easy - you just go to boot loader and you start your RUU, or easily put .NBH file to your micro SD and flash it from micro SD.Too bad I can just cry over my Xda Orbit. PLEEEASSEEE HELPPP
I also heard that FTP ROM site is going down ---- XDA GENOCIDE!!! What ARE you doing people!
Try the orbit ROM on ftp if it is still there
When a seller says a device is unlocked, all they mean is that you can use any sim card of your choice. To be able to flash another rom you need to CID unlock it. For the Orbit/Artemis family we only have imeicheck selling the program for unlocking cid.
My advice would be to look for the orbit rom on ftp. If it does not work, check with imeicheck if their program works when device is in bootloader mode, and pay them and download the specific application for your device. Good luck
I had a problem with my Orbit when I tried to change the Rom to the PDAMobiz one. I ended up recovering it by...
1 - Hard Reseting it.
2 - Connecting it up to the PC then running C3v2Unlock note v2 from the the IMEICheck site. This made the screen on the Orbit go bright white.
3 - Downloading the the Rom listed in this thread and following the instructions with in the same
It means that my Orbit is seen as a HTC P3300 but it feels quicker. You do need the UNL file from IMEICheck to keep it unlocked. But it worked for me.
Yes I tried everything in bootloader mode,
the C3V2 Unlock program launched but after detecting the device, it says my device is corrupted with a kind message "[probably by your fault]" ;-)
So guys, everyone who's trying to upgrade : CID UNLOCK YOUR PHONE BEFORE DOING ANYTHING, and carefully read the (excellent) tuto.
FYI, here's the discussion I had with Imeichek guys :
------------------------------------------------------------
Hi,
I'm a little desperate and I hope you'll be able to help me...
I recently bought an 02 Orbit that was supposed to be unlocked (I didn't know the difference between SIM lock and CID lock)
I understood, too late, that I should have ask for my UNL file prior to do this stupid "direct upgrade" I did...
Here are the facts :
1- I didn't follow the instructions found on http://forum.xda-developers.com that explained how to order the UNL file and Unlock the device unlocked
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
4- A dos installation routine the started, then when asked, I performed a hard reset by pressing the softkeys + stylus reset.
now I"m stuck on the O2 logo, with some red informations written :
IPL 1.25.0001
SPL 1.25.0000
GSM 02.67.90
OS 1.28.0.0
but nothing else, the device don't go further
I've tried to install another ROM like ART_HTCWWE_11240501_026790_WWE_Ship, but when I launch ROMUpdateUtility.exe it says that no device connected.
I managed to enter the bootloader but my device is still not be recognised by my computer (not connected message). I tried your C3v2Unlock tool but it says the same : NOT CONNECTED
So please, if you have any information or procedure I could try to fix my device, I would really, really, appreciate, especially after my 30€ contribution ;-)
Best regards
---------------------------------------
2007/2/17, [email protected] <[email protected]>:
Hello,
NO PANIC. You can fix the device. You have to find the CORRECT / a matching ROM for your device. For this you have to know what ORIGINAL phone it is (O2 Xda Orbit UK?)
Tell us what device it is and we try to assist you in fixing it.
Regards,
IMEI-CHECK Team
-----------------------------------------------
Thanks for your fast answer!
Yes it's an original phone, a brand new O2 Xda ORBIT, in box
Regards
Thomas
----------------------------------------------
Hello,
the language is important. Is it UK version?
Regards,
IMEI-CHECK Team
-----------------------------------------------
yes it's a UK version
-----------------------------------------------
Hello,
hmm, sorry to tell you but for the UK version there is no official ROM update available right now.
All you can to do fix it NOW is to send it to repair (service center).
For our customers we offer to fix the device for free (you only have to pay for shipping costs in both directions). We are located next to Glasgow UK. In case you are interested let us know.
Regards,
IMEI-CHECK Team
-------------------------------------------------
Ok,
I guess I don't have any other choice.
Wich ROM will you install if there's no official O2 Rom ?
What is the procedure, what's your adress, and how much will cost the return ?
Thanks a lot
Thomas
-----------------------------------------------------
Hello,
- we can install any ROM of your choice (it only needs to exist)
- we also will unlock the device and you can install ANY ROM you life afterwards
- the device needs to be opnened to use some special hardware to access the flash chip directly
- shipping back to (UK/EU) with INSURED Royal Mail is apx. (7 GBP/15GBP) depends where you are located.
Regards,
IMEI-CHECK Team
---------------------------------------------------------
ok thank you,
but will you be able to flash an O2 Xda Orbit with the french ROM that comes with the (Artemis) HTC P3300 sold in France ? this is exactly the same machine.
Regards
---------------------------------------------------------
Hello,
yes we can flash ANY available ROM to it.
Regards,
IMEI-CHECK Team
----------------------------------------------------------
here I am,
I guess there is nothing else to do.
First I want to thank you all for trying to help, then thanks to IMeicheck, they replied very fast and found a solution, even if I won't hae my Orbit for several weeks.
2- I downloaded a new ROM (PDAMobiz_Dopod_P800W_AKU301_v1.1.0_Lite.exe)
3- I unpacked it and double-clicked on UpgradeRom_P800W.bat
Click to expand...
Click to collapse
Maybe you should not have unpacked the file Just clicking on the file icon starts the procedure, which does some checks before actual upgrade starts.
I have switched so many times between the pdamobiz roms and the HTC one so many times I've even lost count
It's been easy for you... because your phone was CID unlocked ;-)
Well i had HTC ROM and now i have pdamobiz... That means that my artemis is cid unlocked???
my orbit is stuck on boot screen exactly as manples'. i tried to flash pdamobiz custom ROM. i can enter bootloader. can u tell me plz to what change "BsaD5SeoA" with "IMEICHECK save exe file" from imeicheck i've got c3v2unlock.exe & unl file. i tried flash it tru sd card-nothing. I've got o2orebit (ARTE200) please hlp
Psrejic, does your Orbit work again? I have the same problem. Can't get passed the splash screen because I flashed it with the PDAmobiz rom.
Only way to go is thrue bootloader. Did the SD flash work for you?
Same problem here Waiting for any solution ...
Only solution so far is imei-check service, witch will cost you: Price of sending to them: (UK) Then 20£+15£(aprox) to pay them for unlocking and repairing + sending back.
That's what I've done,
I received an email where they confirmed the reception of my device and that they flashed it with a new Rom. My device is supposed to work, it's great ! can't wait to try it.
Hi manples ...
You send it to imei-chek?
My Orbit works again! ... but not with a software solution.
I returned the phone to the O2 shop and they gave me a new one immediately. I didn't mention my PDAmobiz Rom upgrade offcourse.
It isn't the nicest way to deal with the problem, but when o2 flashes the rom on the phone they can sell it again.
Then I did the Imei-check solution. Worked and flashed the dopod rom on it.
hi to all yesterday I was your siimilar problem (I've try to install teh powermap rom...) so my Orbit O2 (original german rom) still only in boot screen, today I've try to install this magic rom:
art_tmouk_11311001_024990_wwe_ship.rar
I've press the comm manager button + power button + soft reset and my orbit it's enter in bootmanager mode so, i've install the TMobile UK rom (I was the O2 german rom...)
only in this mode my orbit work again.
bye
xda orbit stuck
i flashed my xda o2 orbir german rom with PDAMobiz_Dopod_P800W_AKU301_v1.1.2 and now it wont start at all i tryed to enter bootloader but i cant ( voice key and reset ) its stuck at o2 logo and :
IPL 3.04.0001
SPL 3.04.0000
GSM 02.00.90
OS 1.20.0.0
DOSE ANYBODY have a solution ? please help me !
keep up the good work ! thanks

Softbank x01ht stuck in bootloader screen.. pls help!!

Help!
Yesterday when i was trying to installed Leies CE-Star Crossbow on my x01ht, maybe it didn't support WM5.0 and now my x01ht is stuck in the bootloader screen forever!
I've tried to flash it again by micro SD card, it did completed the flashing process but it's still the same, stuck in the bootloader screen.
i've also try the mtty usb connection and set 14 0, still the same...
my bootloader version is 1.04
will there by anyway to fix it??
Please help...i'm a newbie to ppc and i've only been using the phone for 3 days!!
hi, as first look on wiki - http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes then for example in here - http://wiki.xda-developers.com/index.php?pagename=PB_KITL_HERMES or here - http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems problem 4. then ask us if it is another way to solve your problem ;-) and if this did not help, provide us more information about your device.
i have tried using the SD card flashing method with RUU_Hermes_DopodAsia_CHT_1237084_1060010_SHIP and HER_DopodAsia_1237074_1060010_WWE_SHIP.exe rom
But still no difference
do i need to use HTC Hermes SIM & CID Unlock . v3 first even though it's 1.04 bootloader?
does it work on my x01ht??
Please help...i'm really confused

How to Unlock Artemis ONLY via mtty and bootloader mode having official Unlock Infos

The big question is:
Is there any chance to unlock my Artemis under these conditions?
1. Access to Artemis only via Mtty to Bootloader mode possible
2. Today a got the right Unlock Information for my MDA.
Here my sad story:
Step 1:
After upgrade my T-Mobile MDA COmpact III from vm5 to HTC_P3300_GER_3.13.407.1_4.1.13.44_02.94.90_Ship_R
for two day everything works fine. At this point my Artemis was locked (T-Mobile).
Step 2:
After one soft reset yesterday, Artemis cannot start any more. Boot-process stops on second Image (Windows-Mobile)
and don't go further.
Step 3:
First good news is: I can start my Artemis in to bootloader mode and connect my self with Artemis via mtty tool.
Step 4:
Second good news is: I got my unlock information for MDA, and received it from D-T-Mobile today.
What I need is one step-by-step description, how to proceed in this case, assumed, there is hope for me.
Dear community, I’m very frustrates. I need my PDA, need your help
and your my only hope.
MDa Artemis community, I count on you.
Thx a lot
Jacque
- turn phone on (bootloader or whatever, connection to pc)
- try flash SPL
- if succesfull - flash any rom
- put another sim-card in phone and type your reg-code in phone
If the SPL or doesn't work... try some Dopod ROMs...
And if that doesn't work... try to find every rom there is and try them one by one

Categories

Resources