Please help !! I've just performed a hard-reset on the Magician (the S100, by pressing the "on" and "reset" buttons together) and it now boots up to the point where it asks the user to align the screen, I mean it lets me click on the 4 corners of the screen (on the little cross) and keeps on accepting my clicks (I must have clicked already over 20-30 times around the 4 corners of the screen and it doesn't proceed to the next step ... what should I do ?? ... should I leave it without the main battery for a couple of hours or something ?? is there any other way to (completely) hard-reset the unit ?? (i.e. I've read in the past in some posts something about a "bootloader" sequence ??
Hello there,
You seem having some troubles on digitizer.
Try to clean it under the cover using a thick piece of paper like a business card.
Sometimes, if someting is between the cover and the digitizer; this will not work very well.
Pass it all over the four sides removing dust, hairs and so on..
Then try again.
Let me know
cheers
There's no other way to hard-reset 'more completely' ... you are already doing the complete hard reset.
It's obviously very weird. I would agree, to clean the screen completely and see if that does the trick. Also, use the original stylus with the pointy head and not a pen cover or something ... make sure you're accurate when aligning the screen.
You can enter the bootloader but it won't help you ... you can re-flash the ROM from the bootloaded but it doesn't seem like it's a ROM problem. It sounds like it's the screen HW problem.
Hi! i had problems with my m3100 (right upper corner was sometimes automatically ´typing´ ) but this problem was resolved when i read guide how to fix it on this site (bussines card trick, or allow two screws), however it comes back and i must do hard reset, now after hard reset, when i turn my device on everything is ok (it shows welcome...) and i tap on display and align screen is necessary, i align the screen but it comes back always...so is there some chance to turn on system without screen aligment? or something that would fix it? of course i have warranty , but i don´t want to be month withou my phone thanks for answers
Hi,
I've managed to kill my Orbit 2! Everytime it starts up it gets as far as the Windows Mobile splash screen then shows the volumn control (both levels turned down) but goes no further. The power button still turns the screen on and off and the screen still dims after a while with any key bringing it back to full brightness, but nothing happens!
Has anyone else had this problem?
Also, I've looked in the forums, but can't find details anywhere of how to hard reset this phone! The only instructions I've found relate to non-existent buttons!
http://www.hardreset.eu/htc_touch_cruise_polaris_hard_reset_soft_reset.html
Can anyone shed any light on why this is happening or how to hard reset!
Thanks in advance,
Nick
it is the bottom two buttons (below the answer & hang up) and the stylus for a soft reset.
When it asks for a confirmation hit the green answer button
Hope this helps
Thanks NC35 - that did the trick!
Luckily I backed it up on Sunday so shouldn't have lost too much!
Thanks
Having tried ( now three times with no help ever) to speak to O2 and ask how to hard reset following the start menu completely failing..... I was told it was "impossible" you will need to return it and use the "28 day" repair service.....
I have at last managed to restore - thanks to this posting!!
No comes the reseting process - which is a bit of a bore!!
O2 seem to have dispensed with any actual tech support at all!!
Dave
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
bizon said:
The procedure of performing hard reset is perfectly explained in the manual that comes with the phone. "hard reset" is included in the index of this manual, so it takes only a couple of minutes to find out what you have to do.
After all, RTFM ;-)
Click to expand...
Click to collapse
Now, thats not very hepful is it, especially when you're away on business for a few weeks and don't happen to carry the manual with you everywhere you go...
nid
i killed my o2 xda orbit II as well, but unable to hard reset
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
honeyyati said:
sorry guys. I vae the same porblem as nick666 with my xda orbit II. however, hard reset failed!! the window splash screen came back after I hit the green button & it becomes static. I am really worried now. I have done so many paperworks with that xda..anybody please help!!
Click to expand...
Click to collapse
calm down. read this: http://forum.xda-developers.com/showthread.php?t=381600
most likely flashing another rom will fix your problem
I have downloaded the hard-spl. I'm completely stuck. I can't connect my pda to activesync. activesync didn't detect my pda. by the way, when I reset the pda, screen that asked to press SEND for restore to factory setting turn up few minutes after resetting. press green button, screen automatically shows windows mobile startup screen. I'm still stress, |I'm sorry but I can't helped it..
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
honeyyati said:
sorry guys. I have read the instruction wrongly. now it works fine.
many thanks cr1960 who has kindly response to my silly worries
thnaks again.
Click to expand...
Click to collapse
NP. Glad you got your problem sorted
hi boss i have problem with my O2 xdall blue angle when i on the phone it ask me to Tap the target firmly and accurately at each location on the screen. The target will continue to move until until the screen is aligned. And i will will do that till the next day but still.So pls help me to solve this problem plssssss
THAX IN ADVANCE
hmm... something wrong with your screen.... did you try to Hard Reset? maybe rom issue.
u should always perform a hard-reset after each ROM flashing.
dear all ..
Xperia X2 I will not go past the Align Screen when you do a hard reset.
This all started when I tried to opening a screen lock but will not work.
Next thing I did was a soft reset - same problem occurs, the screen is always automatically locked.
I then do a hard reset and press on the welcome screen which then presents the align screen, and I was still able to follow commands align screen but always come back to the place originally started
HELP! Please. Any suggestions?
HELP! Please. Any suggestions?
Instead of tapping on the crosses, press and hold on it until it moves. This should repeat for a few cycles.
go to notepad and create a file called welcome.not and save it to the removable memory card. Put the removable memory card back to your phone.
the phone will start without screen align.
solve se xperia x2 issue of force align calibration
thanks man you help a lot , do you know custom rom to make this device fast?