Blue Angel help - MDA III, XDA III, PDA2k, 9090 ROM Development

hi boss i have problem with my O2 xdall blue angle when i on the phone it ask me to Tap the target firmly and accurately at each location on the screen. The target will continue to move until until the screen is aligned. And i will will do that till the next day but still.So pls help me to solve this problem plssssss
THAX IN ADVANCE

hmm... something wrong with your screen.... did you try to Hard Reset? maybe rom issue.

u should always perform a hard-reset after each ROM flashing.

Related

Help Help! My Magician Screen Alignment dosnt work any more

Hi Bros,
I recently got Imate Jam/Magician but after 4/5 days its screen alignment got out, after soft restart when it came to screen alignment it doesnt let me move on next step, it still ask me to align the screen again and again
plz help me, any one know whats the problem
thanks soo much
Try doing a hard reset and see if you can align the screen. Then do a soft reset and see if the alignment problem has gone away..thy the soft reset again just to make sure.
If that fixes the problem then it 's likely something got corrupted or some software caused the problem.
If the problem is not fixed, ou need to get it serviced
Re: Help Help! My Magician Screen Alignment dosnt work any
araheels said:
Hi Bros,
I recently got Imate Jam/Magician but after 4/5 days its screen alignment got out, after soft restart when it came to screen alignment it doesnt let me move on next step, it still ask me to align the screen again and again
plz help me, any one know whats the problem
thanks soo much
Click to expand...
Click to collapse
I had that problem with my Jam until I upgraded the ROM to 1.12. Before the upgrade, I was able to fix the problem by doing a soft reset when it got stuck in the loop.

screen problem-help?

after i upgrade to the new rom
JAMin_WWE_ 2130923_21309112_020720_ship.exe
i notice a problem in the center of the screen.
it doesnt work when i tuch there with the stylus.
i dont know what to do, does anyone had this problem too?
thanks for advance.
Erez
I would try to align screen first. Go to Settings -> System -> Screen -> Align screen.
evev in the align screen i cant tuch in the middle...
strange...
:shock:
Then I will do a hard reset and send it to customer care if this still exists. Good luck!
In my reading I came found,
http://www.modaco.com/iMate_s_Warranty_repairs_are_FAST_FAST_FAST_-t238487.html
erez29 said:
after i upgrade to the new rom
JAMin_WWE_ 2130923_21309112_020720_ship.exe
i notice a problem in the center of the screen.
it doesnt work when i tuch there with the stylus.
i dont know what to do, does anyone had this problem too?
thanks for advance.
Erez
Click to expand...
Click to collapse
Since the rom update I'm expierincing some alignments problems.. I have to realign my screen every other day or I can't even hit the right button.
Anyone same problems or a solution?
im going back to the first rom to see if the problem is the rom or my hardware....
will post soon
Erez
Any more info on this? Mine is making me nuts - but I tried using an HTC StarTrk, even a couple of symbian-based nokias, hated all three devices and came back - only to remember why I tried to leave in the first place.
SOMEONE PLEASE HELP!!! My future with this device depends on it!
Thanks
Screen Alignment
Hi I have a Imate Jamin only 3 wks old came with the latest ROM, Have exactly the same problem if not worse. I have to realign my screen 4-5 times a day.
I have treid Hard Rest & even reinstalled the ROM (Downloaded from Clubimate.com).
Have tried to contact customer supprt from Imate but no response..........
Anyone has any ideas??????
Rgds

Camera not loading..... please help im new to this phone

Hello well I just reset the phone and everything is working except the camera. I Tryed pressing the button on the side to activate it and going into it on programs and bolth of them had the same responce. the "camera name" pop'd up on the top left and the screen got brighter but nothing more. im not sure what to do to fix it this problem.
thx
Whose ROM are you using?
Regards,
Carty..
If hard reset does not work,try re flash your ROM. If that still does not work, send the device to the service centre for diagnosis.

white screen crash!

I accidently spilled soup on my tmobile mda (wizard). Afer that my wizard keep crashing with a white screen. I sent it for clean, but the problems still occurred! I then did a CID unlock n upgraded to latest TNT WM6, hoping it'll fix, but still got the same problems! The white screen just appear n then the fone just froze! can anyone help me plzzz! thnks in advance
When you turn off the screen by pressing the power button, does it work again, or is it still freezed?
You could open your wizard and clean the pins witch are coming from the touchscreen and the slide.
Maby it 'll help you out
You again?
cachon619 said:
I accidently spilled soup on my tmobile mda (wizard). Afer that my wizard keep crashing with a white screen. I sent it for clean, but the problems still occurred! I then did a CID unlock n upgraded to latest TNT WM6, hoping it'll fix, but still got the same problems! The white screen just appear n then the fone just froze! can anyone help me plzzz! thnks in advance
Click to expand...
Click to collapse
Or are you another guy that spits soup on his wizard?
yes its me again! the fone was clean by professional fr $60! can anyone suggest other option?
mine wizard too has same problem....this problem could be solved only by changing by new strip.....in my area peoples said strip is unavailable...thts y still hav this problem....
change new strip?
can u be more specific to what u mean by chaning "new strip" u mean replaced the lcd screen? would it help if I replaced the screen?
umair
strip means those wires which are connection between lcd and main board......i m not professionalist bro...i just tried to find its solution n got one which i told u....

Trinity screen broken

Hi boyz!
I have a problem friends. My Trinity is broken by the surface of the touch, but it display the screen itself is not reached. The problem is that: I have performed a Hard reset and I'm stuck at the calibration of the screen as it is broken! Please if there is a way to pass the stage of calibration, please tell me because i'm lost! Thank you in advance
Try msp remote alignment
With this program you can preform or bypass the alignment from your pc
http://www.codefactory.es/en/downloads.asp?id=43
(the program is halfway the page)
Arjan
WaveMaster1406 said:
Hi boyz!
I have a problem friends. My Trinity is broken by the surface of the touch, but it display the screen itself is not reached. The problem is that: I have performed a Hard reset and I'm stuck at the calibration of the screen as it is broken! Please if there is a way to pass the stage of calibration, please tell me because i'm lost! Thank you in advance
Click to expand...
Click to collapse
hello wavemaster,i suggest to get your touch screen replaced asap & calibrate your screen when it's been replaced,because i'm sure it'll be impossible 4u still to calibrate it.and even if you passed the calibration,you will find it hard to use your device because the touch has lost its precision,it'll be same as useless.believe me coz i've been there.ΓΌ

Categories

Resources