Computer recognises Xda 2 (USB connection) but activesync would not recognise the Xda 2. I tried Reinstalling the activesync and resetting my xda 2 but the activesync won't work. What happens is that the xda 2 connects itself to the GPRS. Please help
make sure you are using the activesync 3.7.1 version
I am using it
Yes. That is the Activesync I am using. The cradle cable is alright and I have tried changing the USB ports but to no fruition.
try soft reset; try deleting the partnership and re-establishing
try soft reset; try deleting the partnership and re-establishing
Tried soft reset, but won't work, tried re-installing software (Activesync 3.7.1) on desktop won't work either. I then tried hard reset and guess what, won't work. Don't know what to do now
try putting the cradle in another usb port
try installing motherboard drivers for usb via chipset seem to need those
try if it works with another computer
kaycy, did you fix it?
Same happend to me and i've tried everything!
are you using cable or cradle
Are you using the official cradle?, or an aftermarket cable?
Go to active sync -> file -> get connected
CHECKNOTIFICATIONS ISSUE
Yes. I fixed it.How is the Question. I did a hard reset and it worked this time. The differece this time was that I did not restore backup files from my SD card. I knew what I had in it and re-installed it. GUESS WHAT? It was this software called checknotifications. It is the only one that caused trouble immediately after I had installed it.
So your problem could be some other software that you might have downloaded as well.
Thanks lads
Related
After I updated to version 3.17.03 ENG of the ROM I am unable to connect unsing Activesync.
Anyway to revert or start from scratch?
Help.
try plugging into deifferent usb port; also try deleting the partnership and restablishing. also make sure you are running latest version of active sync
bobn said:
try plugging into deifferent usb port; also try deleting the partnership and restablishing. also make sure you are running latest version of active sync
Click to expand...
Click to collapse
Been there done that. MSAS tells me it doesn't recognize the device.
go to device manager and delete the devie and let the system install.
The device is is not recognizing is the xda not the sync cradle.
i have some problems with activsync. on my qtek 9100 when i put the usb cable in the activsync starts and is blocking on retreive settings. i colsed all firewalls but still nothing. i installed different versoins of activsync but still nothing. i managed to sync the phone with the pc one time and then after i hard reset it nothing. somebody suggested reinstalling windows but that's out of question because it's my work comp and i don't have access.any one have any suggestion?
Thanks
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
NiklasM said:
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
Click to expand...
Click to collapse
Everything all right
Are u using the same version of Active sync that came bundled with your device?
If yes TRY THE UPDATED VERSION
If NO, Try the PREVIOUS VERSION.
maybe there is something wrong in one of the connecting Pins In the cradle/Socket of the cable
How do I update software in the device, when I cannot sync?
Ive tried different software in my PC. None worked.
Im not sure its a HW-failure in the cable, since I tried different ones..
It could be in the device, Im not sure how to check though.
/n
What version of ActiveSync has worked for you up until now?
Try an older version of AS:
3.8: http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx
Oh I solved it....by making a hard reset - SURPRICE!
What a crap device this is...
That almost always does the trick....sometimes my MDA II will act really weird and a soft or even a hard reset will fix a seemingly incompatible app.
All,
I am currently able to charge my TYTN, but unable to get a USB connection to activesync; any ideas?
I have tried switching off the usb advanced but i doesn't work...
When I soft reset while the USB cable is connected it starts up in bootloader but does not show it is connected via USB.....just nothing but the bootloader startup screen.....
IPL is 1.01 and SPL is 1.04.
My rom is the latest South African....
Ant help would be very nice,
Cheers,
HJ
sounds like a firewall problem. Try disconnection from the internet and disable your firewall. If it connects then, adjust the firewall settings before reconnection to the internet.
I had the same problem with EZ Firewall
Nope, it is not the firewall, it used to work perfectly and it suddenly doesn't...
2 different computers have the exact same problem..any ideas?
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
marisa4755 said:
I'm sure you've probably tried these, but just in case:
Reset device & stop activesync on device (memory/running programs)
Reboot laptop/pc
check in task manager that activesync is not running in the background
Delete existing partnership in Activesync & set it up again
Click to expand...
Click to collapse
Yeps, tried all of that.....even ahard reset....
But still no succes, now back to syncing via IR....
Just :
START > SETTINGS > CONNECTIONS > USB to PC (then untick this box)
Then try again, worked OK for me!!!
use USB switch program
try install this program in your PPC and after that change activesync via serial instead of RNDIS.
worked on my Unieversal but i do not know yours
i don't think you need this program as it is already available in control panel -> connections -> usb-pc
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
pole_vaulter12 said:
hellejoep - any progress in solving this problem? I seem to be having the same problem with mine - tried activesync 4.2 and 4.5 on two machines - running the latest SA ROM.
Click to expand...
Click to collapse
The weird thing is that I got it to work on my home WinXP pc with a different cable....
I need to do some more testing...
Cheers,
HJ
Unable to connect
Hi,
I have the same problem. Anyone solve this?
I have a cable that just wont sync, try a different cable maybe.
wpbear said:
I have a cable that just wont sync, try a different cable maybe.
Click to expand...
Click to collapse
I'll do and let you all know!
I tried another cable but that one also recognises my an unknow device.....is it somewhere in my USB drivers?
This pc is Win2k SP3, on my XP SP2 it was working....
Any ideas?
I had a defective cable. It did exactly what you are describing. All other cables worked fine.
I need help:
I can't sync my HD with PC to root, maybe the cabel is problem, it is working for battery charging, but when I plugin in to PC nothing happand (dosn't recodnise it)
Is there any other way to root my HD without sync it with PC? PLEASE HELP
kiretocin said:
I need help:
I can't sync my HD with PC to root, maybe the cabel is problem, it is working for battery charging, but when I plugin in to PC nothing happand (dosn't recodnise it)
Is there any other way to root my HD without sync it with PC? PLEASE HELP
Click to expand...
Click to collapse
1. Soft reset your HD & restart your PC. If not working,
2. Go to HDsettings/connections/USB to PC and un-tick "Enable faster data sync".
Maybe it will work...
Also, go to connection settings in activesync and ensure that "allow usb connections" is enabled
thanks man, but I try that a million time but dosn't work (I have expirience with rooting and flashing roms on my xperia)
it is set just like that but still dosn't working any other idea?
FIREWALL - can block comunications.
It would also help if you state your PC OS.
From ActiveSync I guess it's Windows... but which one?
And does your PC recognize HD in "disc drive mode"?
Ah... I have not heard it yet, but antivirus may be guilty here too...
i try on windows xp, i try on windows 7 but nothing happands when I plug in it in to the PC in every mode, disc drive, active sync...
and i try it with disabled firewall and my anti virus but still nothing, but usb port is working for charging the battery
i recommend for u a program its name (pim backup) its making a backup for ur contacts and calender and call history and all ur favorites things
try to search it and if i find it i will send u the link its petter 1000 times then the active sync
1. Try another USB cable
2. Try on another PC
Regarding PIM Backup I also recommend it, but it can not replace sync with Outlook...
Umm... I guess you use original HTC ROM, since you want to "root it". Which ROM?
I need active sync to root my hd not to beck up files from my phone, can this program do that?
Yes I am using original ROM version:1.14.479.3(25874)wwe
radio version:1.09.25.14
I had tryed on 3 diferent PC's everywhere is the same, but I don't have another cabel to try
and i have new problem, I lost signal of the network on my HD, my phone is dieing
NEED A HELP!
If you're having problems connecting the phone to your PC via USB, and now it's having connectivity problems to your network provider, I'd say it needs a visit to the service centre for repair.
I think that is my only solution
try to wipe device and hard retart your device
Hm, yes... if hard reset does not help, then service is the next step...
And any mini USB cable will do... I'm using one from my Olympus camera...
I try hard reset million times, still nothing... thanks guys but I think that the servis is the only solution
I have try with another usb cable, but still nothing, the problem is not in the cable...
Then it's service...