i have some problems with activsync. on my qtek 9100 when i put the usb cable in the activsync starts and is blocking on retreive settings. i colsed all firewalls but still nothing. i installed different versoins of activsync but still nothing. i managed to sync the phone with the pc one time and then after i hard reset it nothing. somebody suggested reinstalling windows but that's out of question because it's my work comp and i don't have access.any one have any suggestion?
Thanks
Related
Computer recognises Xda 2 (USB connection) but activesync would not recognise the Xda 2. I tried Reinstalling the activesync and resetting my xda 2 but the activesync won't work. What happens is that the xda 2 connects itself to the GPRS. Please help
make sure you are using the activesync 3.7.1 version
I am using it
Yes. That is the Activesync I am using. The cradle cable is alright and I have tried changing the USB ports but to no fruition.
try soft reset; try deleting the partnership and re-establishing
try soft reset; try deleting the partnership and re-establishing
Tried soft reset, but won't work, tried re-installing software (Activesync 3.7.1) on desktop won't work either. I then tried hard reset and guess what, won't work. Don't know what to do now
try putting the cradle in another usb port
try installing motherboard drivers for usb via chipset seem to need those
try if it works with another computer
kaycy, did you fix it?
Same happend to me and i've tried everything!
are you using cable or cradle
Are you using the official cradle?, or an aftermarket cable?
Go to active sync -> file -> get connected
CHECKNOTIFICATIONS ISSUE
Yes. I fixed it.How is the Question. I did a hard reset and it worked this time. The differece this time was that I did not restore backup files from my SD card. I knew what I had in it and re-installed it. GUESS WHAT? It was this software called checknotifications. It is the only one that caused trouble immediately after I had installed it.
So your problem could be some other software that you might have downloaded as well.
Thanks lads
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
NiklasM said:
Ive always been able to connect my S100 to my PC and Active Sync has automaticly started up asking me what kind of connection I want (Guest or Standard) But now it wont work.
It still charges through the USB and when Windows finds the device but Active synd doesnt. (Im running latest version from MS)
I've un- and reinstalled Active Sync
I've tried different USB-ports
I've tried different USB-Cables
I've tried different computers (wont work there either)
I've rebooted the device
It must be something in my S100
Please help!
Thanx in advance
n
Click to expand...
Click to collapse
Everything all right
Are u using the same version of Active sync that came bundled with your device?
If yes TRY THE UPDATED VERSION
If NO, Try the PREVIOUS VERSION.
maybe there is something wrong in one of the connecting Pins In the cradle/Socket of the cable
How do I update software in the device, when I cannot sync?
Ive tried different software in my PC. None worked.
Im not sure its a HW-failure in the cable, since I tried different ones..
It could be in the device, Im not sure how to check though.
/n
What version of ActiveSync has worked for you up until now?
Try an older version of AS:
3.8: http://www.microsoft.com/windowsmobile/downloads/activesync38.mspx
Oh I solved it....by making a hard reset - SURPRICE!
What a crap device this is...
That almost always does the trick....sometimes my MDA II will act really weird and a soft or even a hard reset will fix a seemingly incompatible app.
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Did you disable Win XP firewall? You have to disable it or any other firewall that may be installed.
If that solves your problem search MS site for how to authorise ActiveSync for your firewall.
Yes, in fact when I reinstalled windows I didn't install Norton because of the firewall. I have also unactivated windows firewall... but no sincronization occurrs
Maybe you could try another USB Cable? Or try to sync using Bluetooth?
Can't sync my S200 either...
Don't think it's cable because it is brand new :'(
Have you tried to upgrade to the latest activesync right after the installation of windows? (found here)
And perhaps some overactive antivirus programs can bug up syncing too sometimes. Did the installation of new hardware go well after you plug in your device?
When you plug in, did nothing happen or was there a small screen saying it was getting information from the phone? If yes, were you able to setup a connection (guest etc) and after that it didn't want to sync?
Got this issue resolved the fault was some tweaking I did... See, I use fixed IP with my router so I disabled the DHCP client service on services.msc... So activesync could't get the right adress from the prophet... Still don't know how I manage to make that assumption about this problem, but gladly I did
Hope this help other people with similar problem...
Same issue
tonimacaya said:
I have been trying to sincronize my S200 Qtek but it is impossible. I have made several hard and soft resets and tried with three different computers. I have installed 4.1, 4.2 and 4.5 beta versions of ActiveSync, but it is always the same: ActiveSync seems to turn on but no sincronization initialize when I connect my S200 to the USB port.
I have also made a format and reinstall windows XP but I can't syncronize information... please help me!
I have also tried to install "USB killer" without success...
Click to expand...
Click to collapse
Did you manage to fix your USB problem?
I need some support with the same problem.
Regards,
h
hi, trying to synch my wizard to eith er desktop (xp) or laptop(vista). it worked with vista briefly then stopped and has never synched with xp. the phone is charging when plugged in. xp just says windows mobile based device has found errors when installing and wont install, and vista wont recognise it apart from charging. i read that i should change the usb to pc settings in the connections tab, but i have searched the entire phone and that setting is not anywhere. i have performed many soft and hard resets, but to no avail, and also tried 3 diffrent usb cables. also tried syncing with bluetooth, but same response.
can someone please shed some light on this, as its getting very inconvenient to keep having to use the mem card for everything, and i really wanna try a new rom on this blasted thing!
thanks
try uninstalling activesync on the pc. it seems that the drivers may have been corrupted. also use a program that does secure deletion like "ccleaner" if I remember the name correctly. that shoud delete all of the files and overwrite the deleted sectors on your hard drive completely; as well as make sure tha there are no registry keys left behind.
then, restart the pc and reinstall activesync. and reset the phone before connecting.
The above is worst case senario. before doing that, try this first:
delete partnership in activesync and reset the phone. restart the computer (shut down, not restart)
then when the comp boots completely and the phone boots completely; try reconnecting again.
I once had that problem with a rom I flashed. someone forgot to put the driver into it
fixed...for now?
ok first...wow, thanks for all that!!!! second.. i think i may have fixed it! i was wandering thro the forums seeing what i could find on the subject of activesync problems...50gazillion posts later...i found this page http://forum.xda-developers.com/showthread.php?t=271174&highlight=rndis
it eemed peoples were having the same probs as me. in one post was a rndis to serial cab file, so i d/ld it and installed on my fone via the mem card, plugged fone in....synched straight away!!!! and has stayed synched so far..about half an hour. i shall post tomorrow whether it will resynch after a period of being disconnecte...fingers crossed!!!
Please help me
when connect htc p3450 to my pc i get this message from active sync 4.5.0:
Active sync cannot connect to Windows Mobile powered Device. To trouleshout problem click OK
i try try to hard reset and soft reset but nothing. when i connect phone i hear sound USB device connected but just cant connect to active sync
i also try to reinstal active sync but again ...nothing :
any idea what to do?
I had the same problem before and what I did is to hard reset my phone
activesync worked fine again after that...
tjomibk has already mentioned he has done a hard reset.
remove active sync, download and install the latest and also update the drivers for your HTC.
tjomibk said:
Please help me
when connect htc p3450 to my pc i get this message from active sync 4.5.0:
Active sync cannot connect to Windows Mobile powered Device. To trouleshout problem click OK
i try try to hard reset and soft reset but nothing. when i connect phone i hear sound USB device connected but just cant connect to active sync
i also try to reinstal active sync but again ...nothing :
any idea what to do?
Click to expand...
Click to collapse
Try to un-check Enable faster Data Synchronization Under Settings\Connections\..
You do have Active Sync/Windows Mobile Device Center installed on you computer right?