(soory my english) I updated the XDA 1.2 ROM throught the USB cradle, but before I overwrited my HDD by utility XDArit.exe so when I started flashing the rom, on the XDA was written "Update your rom" or something, but the process stoped cause the update program can finded the souce XDA rom 1.2 file. So I try the rom write to the SD card throught the card reader, go to the boot menu, updated rom, but the sign "Update your rom..." was still there. I made hard reset, soft reset, I got the sim out, nothing. The sing was still there. So I made upgrade T-Mobile rom 2003 throught the xdarit.exe a now I cant power on my xda. Boot menu is still off. When I get the XDA to the cradle, there is bad sign "Update your rom"... and some points...
Can you help me? Thank you very much.
You need to be a little more concise with your problems but from what I can gather....get an sd card, xdatools, and a rom of your choosing and read a lot more posts before doing anything else.
Once you've done that...burn an image onto the sd card and place it into your device. Boot it up and you should be oka.
Thank you, It goes super!!! XDATOOLS - the best program!!!
i have Qtek 1010 i did upgrade from PPC 2000 to 2003 in the middle of the upgrade 82% it get stuck .. now my qtek is not working ..
i have SD card .. but i dont have a backup for my previuos OS ..
any help will be appreciated..
reagrds to all
QUsai
How were you doing the upgrade, PC install or the SD card boot loader
method? If was the PC install trying using the SD card boot loader method.
For more info. on the SD card boot loader method just do a search on the subject in this forum.
HTH
HELP.... I was unable to upload my sx56 with the new 2003. I crashed my ROM... Any ideas on how to restore.
Rock
Tell me what you see from the display.
I can help!
Froozen SX56 while upgrading the ROM
Unfortunately my system crashed when i was upgrading my ROM this is for a AT&T SX56 Pocket PC which I wanted to unlocked so that I could use it with T-Mobile SIM card. Now the screen says :
Upgrading
It will take about 5 minutes...
I was trying to upgrade it with the xda-developer rom verison.
I dont have any backup also for this device please help and I do have a SD card and SD card reader also.
If the bootloader not be erased, you could still use SD to restore OS.
If the bootloader already damaged, the only solution is hardware solution.
I can help you to resolve all problems
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
shri62 said:
How to restore using the SD please tell me.
I do get the bootloader mode when i pressed the power , navigator and reset button on the pda
Click to expand...
Click to collapse
using Xdrit to write the OS to SD card via SD writer.
you can get Xdrit from xda-developers.com (do some search).
Need real help
cgigate said:
I can help you to resolve all problems
Click to expand...
Click to collapse
I had this stupid RadioStack crash that resulted in GSM ERROR that made my device unable to recharge the battery or run mobile function, so the status now is a ppc which has no phone and should always be conected to AC
when I consulted the Agent service tey claimed it's a motherboard error that would require a new baord, which'll cost me around 300$.
could you please help me!!
Cgaigate, is it possible to restore a corrupt radio stack using jtag, if you have the capability I can let people know.
GSM ERROR - RADIO STACK CRASH
Hi Smiley,
I crashed my Radio Stack, too. Has anyone an idea? Is it possible to repair? By myself?
I heard cgigate could help?
Bye
Yep - "GSM Error" in Wallaby Bootloader 5.15
Anyone got any ideas on fixing this one?
Cheers!
Andy
Hi got the xda1 rom/radio upgrade from o2 web site.
installed radio upgrade first, it then asked me to remove ac power, i took it off dockign station, it rebooted, asked me for a simlock.. to which there was no mention of in the upgrade instructions.. i turned it off and on, and now it wont even boot up.. comes on with 02 logo.. then a white screen with blue banner at top..
what can i do to fix it??
i cant even see it on the pc!!!
please advise, i really hope i have not broken it.
can o2 do anything?
i can get to the bootloader by holding down power when soft resetting phone.. comes up with gsm error...
then nothing....
i can get to other menu about sd backup ect if i hold down the two buttons at top of unit when in bootloader.
how do i go about repairing the radio and rom ??
is it possible?
bootloader
ok, i can copy the rom ect from xda to sd card... and even copy it back over again.. so if i put the sd card in a reader on the pc.. and put a good rom and radio on it.. will it work ok booting off the sd card?
i can get to that menu from the bootloader..
You need to get a working rom installed then try to address the gsm error, I never heard of an xda asking for sid code when doing an official upgrade. Did you leave your sim card in the xda when it was updating the radio stack? You may be aware from reading on the forum that radio stacks once corrupted are very difficult if not impossible to rectify. I would suggest unpacking the rom you downloaded, burn just the ce part to rom using sd/bootloader method, then try to install gsm again, this time without sim inserted, you will find here on the forum the instructions to burn gsm from sd card, do this after you have a working bootable system. Good luck.
yes., the sim card was in the system at the time.. its an 02 sim card however, so i guessed this was ok.
printed out the 10 page instructions on how to upgrade s.ware so there was no problems (like this)
the radio stack was installed before the rom if that makes any difference?
is it possible for the xda1 just to lock up like this without having done it the way i did?
perhaps it would have done this anyway??
just thinking i could bring it back to place i got it at and not inform them of the s.ware upgrade that caused the problem to see if they can replace it or something...
just an idea, coz at the moment im kind of stuck.
Hi ...
If you managed to reinstall the ROM through SD card, does it mean you have a bootable system but the RSU doesn't work ?
If so and you can access the XDA from Activesync, then you may locate the 4 files of the RSU upgrade from the \windows\startup directory ... delete them then a hard reset may flash the original RSU back if it's not screwed up.
it should be possible to flash the rom via sd, as i can dump the faulty one to sd and then back over.. so, that part of the bootloader works.
ill ring the place ig ot it at and see what they can do, as it just "went off, all by itself"
i would try the sd flash myself but i aint got a card reader for sd.. just smart media.. lol
it doesnt sound as bad as some peoples s.ware problems however, as the bootloader seems to work ok.,. so fixing it may be possible, but ill give place i got it off a ring first.
thanks for all the info.
If it is under warranty and using the official flash upgrade destroyed the gsm radio stack then O2 should repair or replace. Radio stacks are very difficult to repair and people have asked about getting it fixed only to be told the mainboard needs replacing at huge cost.
thanks for the info, i got a sd card reader, but when i put the thing into pc it asks to format it so it wont read the stuff ive dumped from xda to the card..
oh well, ill give these guys a ring to see what they can do.
where can i get hold of the files to put to the sd card?
ive got the rom/radio files, but they are pc exe`s and not seperate files..
well, i got it flashed ok using official 3.17 s.ware via sd card..
on powering up, it still fails, just white screen with blue top, although there is a keyboard icon on the bottom right which was not there before.
still get gsm error on bootloader..
if only there was a way to put new radio stack on it via sd
djkus said:
well, i got it flashed ok using official 3.17 s.ware via sd card..
on powering up, it still fails, just white screen with blue top, although there is a keyboard icon on the bottom right which was not there before.
still get gsm error on bootloader..
if only there was a way to put new radio stack on it via sd
Click to expand...
Click to collapse
Dead phone, you need send service center to repair, or to me
Dear,
I have Wizard ppc (imate kjam). i was trying to upgrade it to WM6. First i downgraded it to (CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE) to CID unlock it. After I unlocked it I flashed a another rom. after flashed successfully the wizard didn't started (hanged after 2nd boot screen). I get another wizard (MDA) i downgraded it and unlocked and then I write rom to SD card using r2sd command when I rebooted device it started to format BINFS without any prompt. I removed the SD Card and put it in imate and restored rom to device. after that both of devices (imate and MDA) starts in bootloader and nothing more than that. PC is connecting to device through USB cable and can connect to it with mtty utility. both devices don't accept rom written to SD from PC using ntrw utility. it always starting to download SPL and get checksum error even the SD Card is formatted and doesn't have any rom image on it.
Please help me, how can I write a complete rom image to device through USB cable in bootloader.
You are in the wrong forum my friend, I will recommend you to visit the wizard forum http://forum.xda-developers.com/forumdisplay.php?f=248
Thread moved to Wizard.