Dear,
I have Wizard ppc (imate kjam). i was trying to upgrade it to WM6. First i downgraded it to (CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE) to CID unlock it. After I unlocked it I flashed a another rom. after flashed successfully the wizard didn't started (hanged after 2nd boot screen). I get another wizard (MDA) i downgraded it and unlocked and then I write rom to SD card using r2sd command when I rebooted device it started to format BINFS without any prompt. I removed the SD Card and put it in imate and restored rom to device. after that both of devices (imate and MDA) starts in bootloader and nothing more than that. PC is connecting to device through USB cable and can connect to it with mtty utility. both devices don't accept rom written to SD from PC using ntrw utility. it always starting to download SPL and get checksum error even the SD Card is formatted and doesn't have any rom image on it.
Please help me, how can I write a complete rom image to device through USB cable in bootloader.
You are in the wrong forum my friend, I will recommend you to visit the wizard forum http://forum.xda-developers.com/forumdisplay.php?f=248
Thread moved to Wizard.
Related
I was updating my new i-mate SP3 (typhoon) to the latest i-mate ROM 2.4.33.11 which completed successfully but now every time I turn on the phone it goes directly to the bootloader tri-color screen. I tried several times to update the ROM again but it does'nt help. It shows the proccess completed successfully but the phone is still stuck in bootloader mode.
In the bootloader screen it shows the following
IPL 1.00
SPL 2.5.0102
I even tried to flash the ROM through an image of Orange4114_ALL_SPL1010091 on a miniSD card but it gives an error message
"Not allowed update!"
Please help me figure out how to get my phone working again.
Same PROBLEM here HELP..!
Exactly the same problem if anybody can help ..please do.
spl
hi
same problem my sp3
SPL
Same problem on spv c500 stuck in bootloader but with 2.05.0130 SPL
sp3i stuck
Hi all,
I have the same problem, but I didn't try the mini-sd boot.
surfturtle, will you kindly send me the way?
Thanks
Hi guys...
I don't have the Typhoon and don't know if this will work for you, but this is at least how we fix this problem on the Hermes:
Enter into bootloader using mtty.exe and run the command "set 14 0" and "task 8". Phone will reboot and start OS.
If it doesn't work, then try the SD flash method mentioned by surfturtle. Keep in mind that if your device is not superCID the image file should match the CID of your phone (must be an original shipped update from your vendor). This method consist on:
1) extract the rom image from the rom upgrade exe (winrar or cabextract can be used for that) and you'll find a .nbf file.
2) Rename it to TYPHIMG.nbf
3) Format your SD card in FAT32
4) Put TYPHIMG.nbf on the root folder of your SD card
5) put sd card on the phone, and enter into bootloader
6) confirm flashing on screen, and wait until the process is finished (do not reset it, will take about 30min).
Check the hermes wiki if you need more information on any of this.
Good luck!
sp3i stuck
thanks pof,
but where would I get mtty.exe and where will I see "set 14 0" & "task 8"
thanks again.
Re: sp3i stuck
@Tall_Man: See the hermes wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
I-mate ROM
Hi, I did the upgrade through the PC but the device info still shows the old ROM: 2.1.33.13 No error messages and the phone keeps hanging on me.
Is this version of ROM the Arabic one? If not, can someone post or point to where I can download the arabic version? I did not find it on the I-mate website.
Thanks in advance,
I-mate SP3 (?rom 2.1.33.13)
Hi,
I'm kind of new around here.
My problem is as follows:
- TyTN running PaysRom for about 9 months
- Started to get very sluggish
- Unable to get signal
When i booted my HTC the 'R' and 'G' that appear on screen and used to have values in front of it now display 'none'.
So, I connected it to my PC, 'activesynced' it and tryed to install a new ROM, hoping it would solve the problem.
But the new ROM wasn't installed sucessfully and now all I got is a brick.
I can't even connect it to ActiveSync since it's not recognized.
Is there any solution to my problem?
TIA,
hype
Can you get to the Bootloader?
Yes..
By pressing the Ok+Power+Reset on the bottom button, I see the 'RGB'+white thingie, that I believe is the bootloader..
What SPL do you have? Is it Hard SPL V7(2.10)?
If it is, use the sd card method to install a new ROM.
remember to backup your card 1st.
1. Format 2Gb or less sd card FAT32. Copy .nbh file of the ROM you want onto it and rename to hermimg.nbh .
2. Insert card into Hermes and reset into bootloader.
3. If all things have been done right, follow the prompts....
If the radio ROM has died, I'd suggest trying to flash the Shipped Stock ROM 1st and see if that actually fixes the problem with the blank values on R & G. WM06 upgrade of shipped carrier ROM should also work.
Cheers...
Tks for your response.
I tryed the SD Card method already, with no sucess.
The red stripe shows as follows:
Code:
HERM200
IPL-1.04
HERM200
SPL-2.03
Everytime I tryed on another ROM I always perfomed it using SafeSPL.
Since I don't have 2.1, what can I do?
Tks for all ur help.
What happens when you try and flash a ROM over?
Do you get any kind of error?
You need to find the SHIPPED STOCK ROM. WM06 upgrade should be OK as the CID should match.
Put Hermes into bootloader and connect to PC after unticking "Allow USB Connections" in Activesyncs settings on the PC.
Run the RUU_Wrapper.exe file of the SHIPPED STOCK ROM. ven though activesync won't etect it, the flash file should. Follow the prompts.
Good luck as this seems to be the only way to fix this.
Good Luck...
You might be able to flash a Stock WM5 ROM using the SD Card method. Worked for me when I had SPL 2.03. In fact that's the only ROM it would let me flash over when mine bricked.
Hello everyone,
Ok so let me expose my environment:
P3600 - Trinity
ROM VERSION:FinixNOver
ROM DATE:03/03/09
RADIO VERSION:1.56.70.11
PROTOCOL VERSION:32.89.7020.20H
EXTTROM:3.7Normal
So i started by downloading FInix 3.7.1 M2D.
Formated my sd-card in FAT32. Using no label as said in WIKI
Placed "RUU_signed.nbh" in root of SD-Card.
Then i renamed it to TRINIMG.nbh.
Then i did a hard-SPL (restored default ROM, in this case it was FinixNOver, old version).
Then when that was finished i inserted the SD-CARD.
Then i press "POWER" & "CAMERA" & "RESET" but the only thing that came up was the 3 color BOOTLOADER mode.
So here is my problem, I'm hopping someone will have answer.
Thanks in advance.
Danoussh
EDIT: I realised that i'm using a micro sd adapter for an micro sd card in my phone. I quote(WIKI-Trinity_SDCardFlashing ) "Make sure you are using a miniSD and no microSD with adapter." So could it be that it's because of my sd-card?
I got the same problem and solved it successfully by.
1. Put your Trinity to boot loader mode by: pushing both power AND camera buttons while resetting the Trinity.
2.Flash its ROM with HTC official ROM .
3. After step 2 is successful, update your Trinity with a cooked ROM of your choice
While you reponsed, was i talking to a freind about this problem and he said it would be a good idea to upgrade everything on it. He talked about the Hard-SPL and Radio.
So i cherched for the latest HARD-SPL version and found that mine was not up to date (I got IPL-0.50 MFG SPL-1.30.Olipro).
I found the latest here: http://forum.xda-developers.com/showthread.php?t=399827
So i started updating it and the Update Utility showed this error before the flash was about to start.
Code:
Errorr [200]: INVALID UPDATE TOOL
Please get newer Update TOOL
Does anyone have an idea for this new problem?
Thanks anhdalat for response, i shall do what you said after updating HARD-SPL.
Please, anyone?
I am not sure, but what about a difference between p3600 and p3600i
Guys, I have a P3300 that has a non-functioning USB connector. Charging works fine, but it will not sync over USB at all. The device is not detected at all. Even in the bootloader screen, when the USB cable is plugged in, it DOES NOT say "USB" in the bottom corner. Basically, the data functionality of the USB port is fried.
I had used USPL to flash a cooked ROM onto the device, and when the USB port worked, it all went fine. Now, with the USB port not working, I can only flash a stock ROM onto the phone using the memory card method. If I try to flash anything other than the stock ROM, it says "certificate invalid" and won't do it.
I read somewhere that there might be a method of doing the CID unlock by using the memory card, since the phone will not communicate with the computer via USB to use USPL the normal way. Can someone instruct me on how to do that? I have the USPL files on my computer, and simply renaming the .nbh file in order to try to use the memory card method won't work.
Can someone help me figure out how to use USPL or otherwise CID unlock the phone over some method other than USB to the computer? Thanks,
Well you can use activesync over BT, right? That might just do teh trick + SD card flash after it reboots to bootloader.
I might be wrong, it's just a thought
I tried that, but the USPL loader kills Activesync right at the start. So once the phone soft-reboots into the white screen and AS is killed, there is no more BT connection. So the USPL loader fails with an error of not being able to connect.
Can anyone else help?
I faced the same problem. White screen. I removed SIM and SDCARD. So I can flash normally.
Wiki: Artemis SD Card Flashing
Try reading the Wiki on Artemis SD Card Flashing
Those having questions on flashing (i.e. updating) their HTC Artemis could try following these steps 1) Backup e.g. PIM Backup 2) disable standby and hibernation then remove SIM & SDHC cards 3) if necessary then cid unlock 4) recommend hard reset or update to the latest official build 5) if necessary Update SPL to latest 1.11.cmon 6) flash new rom then hard reset 7) put in SIM & SDHC cards and enjoy the result of the hard work by the developer
Also check out this thread Uspl/rom upgrade/tips&tricks
Cheers
Tom
hello. I exactly have the same problem like the thread poster. my mini usb only charges and cant connect data to any pc. its probably broken as common with using the O2 artemis on a car phone charger and starting the car while the phone is still sitted and charging.
MY QUESTION: does "Artemis SD Card Flashing" doesnt require the USPL? since its CID locked?
I had tried install a new room with USB connection but connection failed during the installation. Then I attempted to install back the shipped rom and found it stuck at 0%... I tried the SSPL and could proceed, I doubted whether the bootloader had been corrupted since everytime I used the SD card to flash the device it only stuck at the white page of 'loading...'... I used MTTY and formatted the device... now there is no OS inside the mobile phone. I can't use the SD card to flash and neither do usb connection.... what should I do?????? I felt so frustrated....
Mod. edit: not dev related, moved to general
search also for answers and gl
sorry i didn't state that the device was HD2