Flashing via bootloader 5.22 or going 5.15? - MDA, XDA, 1010 Software Upgrading

Has anyone successfully been able to flash by SD card via bootloader 5.22 or successfully been able to change bootloader 5.22 to 5.15?
Just wondering :?

I used both 6.22 and 5.17
my 6.22 was successfully downgraded to 5.15 using XDATools
my 5.17 was upgraded using SD Flash method with 2 step: boot using wallabypatch and then flash using ROM written to SD card
never try with 5.22 but it supposed to be working without any problem

erickbryce said:
Has anyone successfully been able to flash by SD card via bootloader 5.22 or successfully been able to change bootloader 5.22 to 5.15?
Just wondering :?
Click to expand...
Click to collapse
Have flahed via Bootloader 5.22 about 20 times.
Haven´t any problem until now....
Stefan

ok with 5.22
I've flashed the ROM afew times with 5.22 and Programme A method through XDATools.

Bootloader 5.17 problems
Hi,
Read this thread with some hope for my now paperweight xda1.
Tried to do a radio stack upgrade and crashed the whole thing.
I am using the xda tools to write to and SD Card.
When inserting the card and doing a power button/soft reset the bootloader starts but does not recognise the rom on the sd card.
All I get it the coloured screen showing GSM fail.
Can someone help me out here I must be doing something wrong when trying to reflash the rom.
Currently
Bootloader 5.17
With a stuffed version of 3.20.6 which presents me with a blank white screen when started normally.
Thanks in advance.

which card?
I heard that 5.22 have some problems to recognize the roms in SD's. MAybe it can be a compatibility issue, because LumpiStefan says he can flash with 5.22 from SD.
My question is, which card are you using?
I have a crashed OS and my only alternative is loading from a SD . I have a good bootloader and good GSM. I have not bought the card yet that is because I would like to know which brand and size of card are you using for loading from a 5.22 .
thanks in advance

Re: which card?
sadboy said:
I heard that 5.22 have some problems to recognize the roms in SD's. MAybe it can be a compatibility issue, because LumpiStefan says he can flash with 5.22 from SD.
My question is, which card are you using?
I have a crashed OS and my only alternative is loading from a SD . I have a good bootloader and good GSM. I have not bought the card yet that is because I would like to know which brand and size of card are you using for loading from a 5.22 .
thanks in advance
Click to expand...
Click to collapse
I'm using a SanDisk with 256MB...
HTH
Stefan

well i feel like a tard its upgrading now i hope it works its the se-r special edition from xda

Related

wallaby bootloader v5.17 to v5.15

xda-developers,
i need to know how to get wallaby bootloader from v5.17 to v5.15 by using a sd card.
i have been through the web site for a while now, but the more i read the more confuse i am.
the last time i upgraded the rom it was
rom version 4.00.01 ENG
radio version 4.21
now my xda just shows Wallaby bootloader v5.17 and i cannot active sync with it , so any recommendation??
need help!!

How to upgrade a radio stack using SD card via Boot Loader

Is there a way to repair or upgrade the damaged radio stack using SD card and Boot Loader ?? My device can't go to the today screen , so that active sync can't recognize it. Please help me....

Load rom from SD card?

Hi, I'm having some trouble with my phone. Whenever i start it up it goes into the 3 color mode(I accidentally deleted the software from it) and I can't connect it to my computer through usb(it doesn't see the phone). How can i restore my phone? Can i flash a rom to it with the SD card? If so, how would i go about doing that? Any help would be really appreciated. Thanks!
if it runs in to tri colour bootloader, tell us the bootloader version...
or just terminated the activesync (wcescomm.exe) process frm task manager..
run mtty and do the reflashing again (in case U already downgraded ur bootloader
typhoon
IPL 1.00
--------------
Typhoon
SPL 1.01.0064
--------------
Typhoon
MTTY don't gime option for USB
Teach me how to boot from SD card?
I've made something wrong during reinstalling OS on my T-mobile SDA smartphone. There is no any way to enter into boot loader, just blank white screen. So what I want to try is to boot OS from SD card.
Can anybody give me instructions which file to put on SD card and how to boot it again?
I will apreciate any kind of help.

[Q] T mobile HTC HD2 from stick together to upgrade rom code error- help please

I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks
Please help
Any body please help. I am really frustrated now.
shahzadaziz said:
I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks
Click to expand...
Click to collapse
Flash Task29. Then download 3.14 from http://www.t-mobile.com/wmupgrade/ Flash it via USB and see if that does the trick.
Thanks I tried not only thi smany other roms what happens is it starts to flash and then stops at 9 pct with communication lost, then start displaying upgrade rom code error at Boot (down vol key plus power).
I do task 29 then this rom code error thig goes away but I am not able to flash at all.
Help please.
almost did everything
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks
shahzadaziz said:
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks
Click to expand...
Click to collapse
You try flashing it without the microSD card in there just for kicks?
Lready tried. With Micro SD without MicroSD with SIM without SIM. One strange thing is when the RUU is gathering data from Device before starting the flash and where it tells you the old rom and the new rom ver. I do not see any old rom version. Could it be something serious.?
come on experts I have tried what ever i could getting the info from the net. Should I give up on this HTC HD2 and consider by purchase a loss.
The RUU not showing anything for the old ROM version doesn't mean anything. And I would call up HTC and see what they say about warranty status at this point.
Need Nand Flash Dump for HTC HD2 TMOUS
After a lot of time I have contacted a repair shop (after bricking my phone of course). He jtagged and he is also not able to flash into the phone. He advised if we can get hold of a TMOUS (the one which I have and is faulty, 16GB card) nand flash dump then he can try to flash the nand via that dump.
So any one who can give me the nand flash dumpfor tmous htc hd2 16gb mem card.
my email is [email protected]
I will be grateful, as I am not in US so warranty is kinda difficult. Some one sold me this phone over ebay.
Okay do what now? You need a NAND dump of a TMO US HD2? As, a stock 2.13 ROM HD2? What's this about the memory card about?
i have same problem. can not flash.
but will try task29 first.
plz help.
sevmasentyfo said:
i have same problem. can not flash.
but will try task29 first.
plz help.
Click to expand...
Click to collapse
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.
chong112193 said:
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.
Click to expand...
Click to collapse
can u share which rom u used to update ur hd2
cdma-india said:
can u share which rom u used to update ur hd2
Click to expand...
Click to collapse
I used the latest one put out by T-mobile
T-Mobile_HD2_MR_Software_3.14.531.1
i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE
abcchoier said:
i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE
Click to expand...
Click to collapse
Thats exactly what i have to,,,I'm very stuck now,anyone got any ideas on how to fix this?
Thanks

[GOLDCARD]Get your CID without a Winmo Phone

Iam writing this to share my experience reviving my phone ! my problem was that I flashed an official 3.14 rom with an 3.03 spl on a branded htc hd2 ! the vendor never released a rom even the first one!
So I found my selef stuck with boot loader screen ! no way to make a gold card cause I have no other winmo phone!
After some research in the net this some useful links!
1- to get your CID on a PCI SD card reader (not an usb reader) without a winmo phone!
http://jo0ls-dotnet-stuff.blogspot.com/2008/12/read-secure-digital-sd-card-serial.html
2- after getting the CID don’t forget to reverse the CID before using it on PSAS (how to make a gold card tutorial)
3- write the image on an SD card
http://samsamuel.co.uk/news.php?id=8
thanks to samsamuel and pcwe for there help
Ps: sorry for my crappy English lol
Well, I am stuck in the same spot! After an unsuccessful install of official 3.14 ROM on a branded HD2, it is stuck into bootloader mode with an "upgrade ROM code error, please try again message" and no way to make a goldcard! Please help! Thanks.
Update:
Finally was able to make a goldcard and unstuck my phone! The problem was with the SD I was using. Tried different SD and worked as a charm! Thank you to all forum members.

Categories

Resources