Related
I'm trying reinstall WM6.5 on my HTC HD2 from MAGLDR V1.13.
I've downloaded the stock rom from HTC website and im trying run the installer but it fails it cant seem to pick up my phone as a USB connection.
I tried the bootloader way but it always get stuck at the installation part at 0%.
what am i? doing wrong, its driving me mad..
SPL version is SPL-2.08.0000
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
GreatLorens said:
Make sure you’ve got more than 50% power on the device.
• Unplug USB cable
• Power Off device.
• Press and hold volume down button and press power button to start again.
• You will be presented with a tricolor splash screen.
• Connect USB cable to PC
• On the Tricolor splash screen you see “serial”; change to “usb”, if not unplug and plug the cable back in.
• As Administrator Run the WM6.5 ROM Update and follow instructions, your device should now be flashed with WM6.5.
Click to expand...
Click to collapse
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
rafter_01 said:
thanks for the reply,
done the above a few times but no joy..
I see USB at the bootloader and when i run the ROM update, it doesnt show me what the current version of the phone is but just says it will update to the version 3.14.110.1! so when i start the install process nothing happens, i get the error [302]..
why is that?
any other way to flash this??
Click to expand...
Click to collapse
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
ankushmulay said:
i had came across this issue last week.
when in tri-color mode, re-install hspl 2.08 and then magldr 1.12/1.13.
then try installing wm6.5.
This worked in my case.
Check if it does in urs too...
Al the best...
Click to expand...
Click to collapse
what ive done so far,
re-installed the hspl 2.08 and then installed the radio 2.15.50.14 from the following site: http://www.addictivetips.com/mobile/how-to-install-hardspl-2-08-on-htc-hd2/
but now at the bootloader im getting the following error 'upgrade ROM code error Please try again"
What have i done wrong???
thanks
flash hspl ... radio ... then mag ... then try the downgrade to winmo
rubledub said:
flash hspl ... radio ... then mag ... then try the downgrade to winmo
Click to expand...
Click to collapse
after the radio, I cannot download magdlr, it stops at 29%.. Or sometimes doesn't do anything!!
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Thanks for this info, will try it. Have you got a link to task 29? Is it a software?
No but it is all over XDA. I think you'll find it someware on the WM 6.5 thread. If that doesn't work your nand will be stuffed but it has allways worked for me!
GhostXSeries said:
I'd suggest task 29 to wipe the phone completly. Then make sure you have the correct stock rom for your phone. EG if you bought a EURO o2 HD2 then you need to have the o2 3.14 stock rom. Extract the .nbh file from the .exe.
Use SD Formatter to format your SD card, this will wipe all windows 7 partitions.
Then copy .nbh file and place it on the sd card, then boot into boot loader (tri colour screen) and follow on screen instructions. A grey screen should appear at this point.
This will remove Hard spl and restore WM 6.5 and also restore the first of the two splash screens and the radio back to factory settings and will also restore your warrently as well.
Click to expand...
Click to collapse
Yes, even i suggest you the "flash via micro sd card" method becoz it works in worst cases. and follow all the steps sequencely. good luck
Task29 gives an error 290 and doesn't complete.
Im getting frustrated... What can i do next
task 29 now wipes my phone but everytime i flash a new rom is crashes at 9% or 10% and then i get the error 290.
i downloaded the stock rom for my phone... argggh what can be done?
thanks
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
i must agree with ghost ... sounds like you flashed the poor baby to death :'( sad sad day! and very rare i might add!
GhostXSeries said:
Sounds like nand is dead. Looks as if you will have to return it to get it fixed!
Click to expand...
Click to collapse
cannot believe i messed it up.......
know where i can send it for repair? will HTC cover it under warranty? will they be suspicious?
anyone? do i need to ring my phone contract people or go directly to HTC?
Thanks
Depends how old it is. It may need to go directly to HTC to get it fixed.
I read somewhere that error [290]: Invalid Command - the ROM Update Utility has encountered communication errors during the update process.
Try changing the usb cable/connect directly to usb port (not usb hub) if you still want to use usb for flashing.
I always use the sdcard method when there's a problem flashing via usb. Rename RUU_signed.nbh (extract from stock rom exe package) to LEOIMG.nbh and copy the file to sdcard (sdcard MUST be formatted as FAT32 - use HP format tool). Put sdcard into the phone and boot into bootloader mode ... see if it works ...
I tried the oldest DFT WP7 rom (7004),but I could not boot into WP7.Stuck at DFT logo,I tried to put my microsd card and my sim card out of my phone but it did not work for me.
In addition to other rom such as Pdaimatejam_Rom(7740),HD2O (7720), Back to the future,It could not boot too.Same problem,Stuck at DFT or HTC logo before boot into WP7
I tried to task29 and installed magldr and flashed WP7 rom again in serveral times but it stuck at logo again and again.
My micro sd card is SanDisk 8gb and 16gb class4.It could flash wp7 rom and
boot correctly in the past.Today,It can't boot.
How to fix it back to normal to boot correctly into wp7 ?
Sorry,Has anyone known how to fix this problem?
Hi!
Sorry to hear that you have so many problems with your HD2 Am I to understand correctly that you are unable to install any WP7 release now? If that is the case here are a few ideas that have helped me and others in here:
1. Format your SD-card in a Nokia device or in Linux (I do that) and make a fresh install with the desired ROM (please delete SD mbr and activate extra Nand before installing!)
2. Try to flash a WM6.5 release onto you phone first (beware - this will uninstall magldr!)
3. Try to install WP7 without SD card and when you have booted and phone is running ok insert card and make a hard reset using magldr.
If I have misunderstood your question I'm sorry - Please let us know how things turn out for you!
/Anders
and check if HSPL 2.08 installed
Thank ! Anden1986 and dxdy for your answer.
1. Format your SD-card in a Nokia device or in Linux (I do that) and make a fresh install with the desired ROM (please delete SD mbr and activate extra Nand before installing!)
2. Try to flash a WM6.5 release onto you phone first (beware - this will uninstall magldr!)
3. Try to install WP7 without SD card and when you have booted and phone is running ok insert card and make a hard reset using magldr.
Click to expand...
Click to collapse
still stuck at DFT logo.
Even I restored hspl 2.08 to spl2.08 and changed it back to hspl2.08,I also stuck at DFT logo agian.
Normally,I can use wp6.5 and android (nand/sd).
I have problem with WP7 only.
then is microsd card problem... did you try boot without card? if WP7 already flashed just do hard reset and boot without card
Boot without sd card,I already tried,it don't work.
seems problem in ROM....
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?
Dear all,
Some time ago some guy came over to me to have his phone (HD2) reflashed. I installed the HardSPL, eMagldr 1.13 and the 400mb file-system as needed for the rafdroid version I installed. Everything worked out fine. But now he has manually flashed CWM without changing filesystem etcetera and took out SD card and formatted it. The phone did actually boot in CWM, and he sold it to me. Now I wanted to do a factory reset, but the phone wouldn't boot anymore, nothing. I tried flashing back stock ROM, but the phone will not be found. I cannot even reflash the 400mb filesystem, it says RSPL.cpp missing... I'm running out of ideas and I'm starting to panic a little. So here are my problems:
- Phone crashed when booted into AD RECOVERY;
- Phone does not start up in any way, when lucky stuck forever in CWM bootlogo (for over 60 minutes);
- When booting into bootloader (volume down + power), a text "loading" should appear, but it doesn't;
I have no clue what to do from here. I don have the T-Mobile version of the phone I do know that . But it seems not to respond to anything which sucks. But I do get into MAGLDR with the menu choices so the device can not be ****ed up too bad.
Please advise me on this
Anteino said:
when lucky stuck forever in CWM bootlogo (for over 60 minutes);
Click to expand...
Click to collapse
Cwm doesn't have a boot logo, please explain?
When booting into bootloader (volume down + power), a text "loading" should appear, but it doesn't
Click to expand...
Click to collapse
Only if you have a correctly named leoimg.nbh on the SD card, and the SD card is 4gb or smaller, please confirm?
RE
You're right about the logo i meant CM ( cyanogen ) sorry for that, and no my sd is 4Gb and I named the file LEOIMG.nbh with capitals so going to try that ou tomorrow, but it still doesnt explain why my computer did not find my device with RUU update.. :s
Thanks for your help though you gave me some ideas
Leoimg in capitals should be ok,, correctly extracted from a stock rom? (People still sometimes make the mistake of simply renaming the whole romname.zip file, without extracting the ruu_signed.nbh file first)
Anteino said:
You're right about the logo i meant CM ( cyanogen ) sorry for that, and no my sd is 4Gb and I named the file LEOIMG.nbh with capitals so going to try that ou tomorrow, but it still doesnt explain why my computer did not find my device with RUU update.. :s
Thanks for your help though you gave me some ideas
Click to expand...
Click to collapse
When you try to run the RUU, does it say USB in the white bar of bootloader? if not you have adriver issue and need to install Active Synce(Windows XP) or Windows Mobile Device Center(Windows Vista and 7).
RE:
Yes it does say USB and I managed to do a vodafone update from the HTC site. Though I don't know if it was a vodafone branded device, but that shouldn't matter right?
Anyway, I'm stuck forever in the "HTC" screen in green letters. So this time I'm stuck way earlier. But I'm going to give it half an hour and see what happens. I had to run the update three times before it succeeded so I doubt it.
But another thing, now I ran the update MAGLDR will be restored in its factory form right? And recovery and **** has been removed so I could try to reinstall them and go on from there if the phone won't boot, right?
RE:
Now I can't even get into MAGLDR. The phone is stuck in the first bootscreen saying HTC for over 3 hours now, I turned off my phone and I'm running the update again now, getting errors again. What do you advise? I still got an 8GB sd cart in it but I read somewhere that is OK.
If you flashed a stock rom, magldr is gone, magldr is a hacked together bootloader from the dft hackers,,, there is no "factory form".
Most 8gb or larger cards wont flash nbh files, but some do,
If you downloaded the rom from HTC using your phones serial number, then yes, its voda branded.
I suspect some corruption, some variant of stuck radio, .
I'd start by trying to use hspl2.exe to set hspl 1.66.0000 then flash the stock rom from SD taking careful note of the blue writing during the flash,
As Samsamuel said if you flashed a stock ROM MAGLDR is gone4 and you will have to re install MAGLDR, You being stuck at the splash screen could be caused be the stock ROM you flashed not being the correct stock ROM cause if you flashed it via SD card you removed HSPL and there for if it is not the correct ROM it will not boot. Also if you flashed it via RUU and it is a older ROM version the HSPL 2.08 that you have might no be compatible with the ROM causing it to stick at the splash screen. Maybe this will help some.
my spl was 5.12 and like everyone mee too wanted too downgrade it and install costum roms after hspl
and i saw too much posts and see that the gold card metode was choosed like a best way to do that. and i make a y cable by my self.
make a gold card an microSD 1.gb
download the rom at shiped rom collection
extract setup.exe and take the RUU........nbh and renamed it to Sparimg.nbh
copy that to microsd card after that make the sd card an gold card. after all i start the downgrading... put the phone to usb host mode and immidieatly the update in progress start but and stay like that some minutes than reeboot again again and again and exzactly NOW it has stuck in Checkinng mode i don't want to *****d up my phone plz tell what to do it just reboot and now is stuck in checkinng..... i want my phone back
DjABI said:
my spl was 5.12 and like everyone mee too wanted too downgrade it and install costum roms after hspl
and i saw too much posts and see that the gold card metode was choosed like a best way to do that. and i make a y cable by my self.
make a gold card an microSD 1.gb
download the rom at shiped rom collection
extract setup.exe and take the RUU........nbh and renamed it to Sparimg.nbh
copy that to microsd card after that make the sd card an gold card. after all i start the downgrading... put the phone to usb host mode and immidieatly the update in progress start but and stay like that some minutes than reeboot again again and again and exzactly NOW it has stuck in Checkinng mode i don't want to *****d up my phone plz tell what to do it just reboot and now is stuck in checkinng..... i want my phone back
Click to expand...
Click to collapse
Try asking about this in the GoldCard thread of whatever method you are trying to use, you are more likely to get a response. Sounds to me like you followed the basic steps to a T (even putting the rom image on the SDCard first.. then making it a GoldCard.. that's where most people mess up).