Related
I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks
Please help
Any body please help. I am really frustrated now.
shahzadaziz said:
I bought T mobile HTC HD2 it was displaying Stick together whenever switched on. Just once it booted normal after a long time but then again it was just displaying Stick together.
I decided to upgared the ROM. It has SPL-2.08.0000
I downloaded the latest ROM from T Mobile 2.13.531.1 and went into boot loader connected USB it dispayed USB (i.e changed from Serial). I started after it was done 8 pct it stopped.
I also tried putting NBH directly into the sd card with leoimg.nbh but it is just displaying "upgrade rom error code"
Please help as what should I do next.
Many thanks
Click to expand...
Click to collapse
Flash Task29. Then download 3.14 from http://www.t-mobile.com/wmupgrade/ Flash it via USB and see if that does the trick.
Thanks I tried not only thi smany other roms what happens is it starts to flash and then stops at 9 pct with communication lost, then start displaying upgrade rom code error at Boot (down vol key plus power).
I do task 29 then this rom code error thig goes away but I am not able to flash at all.
Help please.
almost did everything
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks
shahzadaziz said:
well i have been trying continuously since 8 hours but nothing seems to work. I have HSPL3 and when ever I try to flash any rom (have downloaded tons of roms - lol)
it some time just stucks in begining, some times it stsrts and losses communication with the phone from boot loaded. I even tried butting the RUU_signed.nbh to sd card by naming in LEOimage stuff as it is said in the posts and then did vol down pluspower but it seems like it is not even reading from the sd card.
I am not sure what else can I try. I am able to do task 29 from boot loader. I see tri color screen soI am getting into boot loader but I do not know what the h... is wrong with this device.
If some expert can give me directions from here I will highly appreciate. Thanks
Click to expand...
Click to collapse
You try flashing it without the microSD card in there just for kicks?
Lready tried. With Micro SD without MicroSD with SIM without SIM. One strange thing is when the RUU is gathering data from Device before starting the flash and where it tells you the old rom and the new rom ver. I do not see any old rom version. Could it be something serious.?
come on experts I have tried what ever i could getting the info from the net. Should I give up on this HTC HD2 and consider by purchase a loss.
The RUU not showing anything for the old ROM version doesn't mean anything. And I would call up HTC and see what they say about warranty status at this point.
Need Nand Flash Dump for HTC HD2 TMOUS
After a lot of time I have contacted a repair shop (after bricking my phone of course). He jtagged and he is also not able to flash into the phone. He advised if we can get hold of a TMOUS (the one which I have and is faulty, 16GB card) nand flash dump then he can try to flash the nand via that dump.
So any one who can give me the nand flash dumpfor tmous htc hd2 16gb mem card.
my email is [email protected]
I will be grateful, as I am not in US so warranty is kinda difficult. Some one sold me this phone over ebay.
Okay do what now? You need a NAND dump of a TMO US HD2? As, a stock 2.13 ROM HD2? What's this about the memory card about?
i have same problem. can not flash.
but will try task29 first.
plz help.
sevmasentyfo said:
i have same problem. can not flash.
but will try task29 first.
plz help.
Click to expand...
Click to collapse
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.
chong112193 said:
I had this same problem and it is a very easy fix. I rolled back to and original rom. Download the Rom to your Then right click the rom and extract the RUU file.
copy it to your SD card. I couldn't get my 16gb card that came with my HD2 to work doing this so i used my wife's 2gb-4 card. Format the card to fat 32. Rename the extracted RUU file to LEOIMG.nbh my you can download winzip for free to extract the file. The problem is that the phone is set up for fast connection. However you cant change that if the phone wont boot.
let me clean this up a little
1) Download and install winzip
2) Download T-mobile HTC latest update
3) right click update and select extract RUU file
4) rename file to LEOIMG.nbh
5) Format SD card to Fat 32
6) Copy LEOIMG.nbh to SD (I couldnt get my 16gb card to do this)
7) Install in phone and boot
You may notice that i only have a few posts. thats because i an a Noob.
If you search the HD2 ROM development forum for Flashing your First GSM Noobs guide it has almost all the answer and if it doesn't the answers are linked in there somewhere.
Again Im just a noob so if you follow my directions and trash your phone sorry.
Im just trying to help.
Click to expand...
Click to collapse
can u share which rom u used to update ur hd2
cdma-india said:
can u share which rom u used to update ur hd2
Click to expand...
Click to collapse
I used the latest one put out by T-mobile
T-Mobile_HD2_MR_Software_3.14.531.1
i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE
abcchoier said:
i followed the instruction, put the LeoImg file into 1gb microsd. Booted the phone into bootloader mode but it doesn't do anything. It just stay at "Upgrade roM code error please try again"
PB81120 SS-B3
SL-3.03.0000 XE
Click to expand...
Click to collapse
Thats exactly what i have to,,,I'm very stuck now,anyone got any ideas on how to fix this?
Thanks
Hi every one please help me my phone stuck on bootloader screen i tried to flash it with an official ROM by using the sd card method or either the usb connection method but in booth cases it fails (error appears "NOT ALLOWED") when it gets to bootloader screen it shows that spl version is 3.03 i read in a thread that the gold card method will help me but i tried it with a help of a website to generate and send a goldcard by email but it doesn't works may be some thing wrong with gold card from the website so please gentlemen any one have an idea to solve this problem i am really afraid that i lost my phone please please please help !!!!!!!!!!!!!!!!!!!!!!!!!!!!
calm down there champ, you're just using the ROM for the wrong region.
go to the HTC support site and find your correct ROM for your region with your IMEI number and flash it, you don't need a gold card.
orangekid said:
calm down there champ, you're just using the ROM for the wrong region.
go to the HTC support site and find your correct ROM for your region with your IMEI number and flash it, you don't need a gold card.
Click to expand...
Click to collapse
thanks for reply I hop you are right but how can I find the correct ROM by my IMEI I saw just the serial number and when I enter my serial number they told me that the ROM is not suitable with my device
Bareq said:
Hi every one please help me my phone stuck on bootloader screen i tried to flash it with an official ROM by using the sd card method or either the usb connection method but in booth cases it fails (error appears "NOT ALLOWED") when it gets to bootloader screen it shows that spl version is 3.03 i read in a thread that the gold card method will help me but i tried it with a help of a website to generate and send a goldcard by email but it doesn't works may be some thing wrong with gold card from the website so please gentlemen any one have an idea to solve this problem i am really afraid that i lost my phone please please please help !!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
Calm down mate
The possible reason is the rom you tried to flash is not the. CORRECT STOCK ROM.
Go to HTC website to download unbranded hd2 rom or go to your carrier website for a branded hd2.
Else, you should check your micro sd condition
Cheers
Hello, i have HD2 from Europe unbranded and alredy instaled HardSPL cottula.
but i mistake and flash with HD2 T-Mobile US rom - RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship and stuck on 9% with red line.
now i flash other eu rom RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship but always stuck on 9% also tried with other rom same :/
can any body help me, this is software err not hardware right?
p.s. information of bl is
PB81100 HX-BC
SPL-2.08.HSPL 8G XE
Phone was bring to life, after flashing with RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but now only on white screen with HTC logo stay :/ where is the problem?
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?
I`m writing this after almost a full day of searching and testing with no luck.
I have friend who tried to upgrade Rom into his Touch HD and failed.
Right now all the phone does is to start in tricolor menu. I have tried several Roms but when trying to flash they get stuck at 0% and after a while it ends up with error 262. Same thing happens when trying to upgrade to HSPL also (i do not have a working Rom on this phone, just a tricolor menu which starts automatically when phone started ). I have tried to flash rom with SD card (2Gb), and with Ruu with Win7 and XP.
Info :
Blac100 32M
SPL-1.54.0000
MicroP-Blackstone (LED) V6
How can i recover this phone? Can anyone pls help me ?
I have attached a Print screen of my folder dedicated to this phone. Everything there i have tried.
oh my god...you tried to flash a ROM without SPL!? are zou crazy? first you have to flash HSPL, search for the latest spl 1.56 olinex and when you get the (.nbh) file, name it to Blacimg.nbh and put on SD card (on root!) then it will appear a confirming message to install the .nbh, and you confirm.
note: not having HSPL is pratically the same thing has having a locked bootloader...
mfsr98 said:
oh my god...you tried to flash a ROM without SPL!? are zou crazy? first you have to flash HSPL, search for the latest spl 1.56 olinex and when you get the (.nbh) file, name it to Blacimg.nbh and put on SD card (on root!) then it will appear a confirming message to install the .nbh, and you confirm.
note: not having HSPL is pratically the same thing has having a locked bootloader...
Click to expand...
Click to collapse
Yes i know... not me was the one who tried... i have received it like this, and trying to recover it. The idea is when trying to install HSPL it get stuck at 0%, and the alternate method implies booting into system... but i do not have a system on device. I have also tried to download the official rom from HTC website.... and after 1% it says "invalid vender ID".
Flash SPL from sd card. Name the file as BLACimg.nbh and put on sd root. Then enter Tricolor screen (If it doesnt go automatically) and confirm the flashing. Then SEE If you get the htc logo and a empty shell ( black screen) . If you do good, now normally Flash a ROM ( you can use sd method or throug pc
---------- Post added at 03:26 PM ---------- Previous post was at 03:24 PM ----------
If it doesnt work try another sd
This what i`m trying, but it get stuck to "loading" . I have downloaded "HSPLWrapper_Blackstone_156OliNex" , started "HSPLWrapper_Blackstone_156OliNex.exe" , nbh file apeared in same folder, copied to SD (formated to Fat32, default alocation unit) started phone, gone in tricolor then "loading" message on screen and nothing else (for 10 minutes already).
hmmm... keep waiting
finaly solved
I have finaly solved it. First you need Windows XP on PC. Download USPL 2.5 and open a CMD window. Start utility to upgrade to HSPL OLINEX and after presing update , and progres bar apears on phone execute fast the uspl in cmd window (otherwise it will say it cannot open USB port). After this you phone will reboot in tricolor but instead of SPL you will se USPL 1.14. Disconect usb from phone and reconect it, now it should say is connected to USB. Relaunch the HSPL update utility and wait to get to 100%. When done phone will reboot into system (if you have any).
its a way, but you could simply flash hspl trough sd (use other sd if that doesnt work, I needed to cange too!)
mfsr98 said:
its a way, but you could simply flash hspl trough sd (use other sd if that doesnt work, I needed to cange too!)
Click to expand...
Click to collapse
Believe me ! i have tried with four different SD cards, one of them indeed did not worked (a 4Gb). I do not know exactly what happened to the phone but it was impossible to flash anything to that phone (except some shipped roms witch would fail after 1% with invalid vender ID on pc and some 28008 error via card) . As i said one post earlier, the only way was via USPL, witch needed a workaround method (because it too failed with "could not access usb port" error). And the USPL worked only on Win XP and had a very narrow time window to execute the file (to have the USB port accessible ). After changing to SPL 1.56 Olinex phone booted with the old WM 6.1 stock. But i have changed 3 other roms after that, finally settling to energy Rom. With Olinex i had no problem at all flashing the Roms. I have even flashed a new radio, with absolutely no problem. Don't know what was the problem exactly, but the old SPL 1.54 had some serious issues !
I`m just glad i have revived this phone (witch btw, is not even mine)....
the old SPL, was locked lol. It's the stock SPL straight from HTC. But doesnt matter, good thing you solved your problem
10x
Wow, thanks alot for this post. I've done the same thing as you and crashed my HTC. Problem solved with Win XP, but more simple. Just executed USPL.exe and, job done. I think in Win7 was the problem with certified drivers. Think that can be solved in a fresh instalation of Win7 but not with certified microsoft drivers or HTC Sync installed. Anyways thanks alot. You've been a lifesaver.
my spl was 5.12 and like everyone mee too wanted too downgrade it and install costum roms after hspl
and i saw too much posts and see that the gold card metode was choosed like a best way to do that. and i make a y cable by my self.
make a gold card an microSD 1.gb
download the rom at shiped rom collection
extract setup.exe and take the RUU........nbh and renamed it to Sparimg.nbh
copy that to microsd card after that make the sd card an gold card. after all i start the downgrading... put the phone to usb host mode and immidieatly the update in progress start but and stay like that some minutes than reeboot again again and again and exzactly NOW it has stuck in Checkinng mode i don't want to *****d up my phone plz tell what to do it just reboot and now is stuck in checkinng..... i want my phone back
DjABI said:
my spl was 5.12 and like everyone mee too wanted too downgrade it and install costum roms after hspl
and i saw too much posts and see that the gold card metode was choosed like a best way to do that. and i make a y cable by my self.
make a gold card an microSD 1.gb
download the rom at shiped rom collection
extract setup.exe and take the RUU........nbh and renamed it to Sparimg.nbh
copy that to microsd card after that make the sd card an gold card. after all i start the downgrading... put the phone to usb host mode and immidieatly the update in progress start but and stay like that some minutes than reeboot again again and again and exzactly NOW it has stuck in Checkinng mode i don't want to *****d up my phone plz tell what to do it just reboot and now is stuck in checkinng..... i want my phone back
Click to expand...
Click to collapse
Try asking about this in the GoldCard thread of whatever method you are trying to use, you are more likely to get a response. Sounds to me like you followed the basic steps to a T (even putting the rom image on the SDCard first.. then making it a GoldCard.. that's where most people mess up).