xda-developers,
i need to know how to get wallaby bootloader from v5.17 to v5.15 by using a sd card.
i have been through the web site for a while now, but the more i read the more confuse i am.
the last time i upgraded the rom it was
rom version 4.00.01 ENG
radio version 4.21
now my xda just shows Wallaby bootloader v5.17 and i cannot active sync with it , so any recommendation??
need help!!
Related
Has anyone successfully been able to flash by SD card via bootloader 5.22 or successfully been able to change bootloader 5.22 to 5.15?
Just wondering :?
I used both 6.22 and 5.17
my 6.22 was successfully downgraded to 5.15 using XDATools
my 5.17 was upgraded using SD Flash method with 2 step: boot using wallabypatch and then flash using ROM written to SD card
never try with 5.22 but it supposed to be working without any problem
erickbryce said:
Has anyone successfully been able to flash by SD card via bootloader 5.22 or successfully been able to change bootloader 5.22 to 5.15?
Just wondering :?
Click to expand...
Click to collapse
Have flahed via Bootloader 5.22 about 20 times.
Haven´t any problem until now....
Stefan
ok with 5.22
I've flashed the ROM afew times with 5.22 and Programme A method through XDATools.
Bootloader 5.17 problems
Hi,
Read this thread with some hope for my now paperweight xda1.
Tried to do a radio stack upgrade and crashed the whole thing.
I am using the xda tools to write to and SD Card.
When inserting the card and doing a power button/soft reset the bootloader starts but does not recognise the rom on the sd card.
All I get it the coloured screen showing GSM fail.
Can someone help me out here I must be doing something wrong when trying to reflash the rom.
Currently
Bootloader 5.17
With a stuffed version of 3.20.6 which presents me with a blank white screen when started normally.
Thanks in advance.
which card?
I heard that 5.22 have some problems to recognize the roms in SD's. MAybe it can be a compatibility issue, because LumpiStefan says he can flash with 5.22 from SD.
My question is, which card are you using?
I have a crashed OS and my only alternative is loading from a SD . I have a good bootloader and good GSM. I have not bought the card yet that is because I would like to know which brand and size of card are you using for loading from a 5.22 .
thanks in advance
Re: which card?
sadboy said:
I heard that 5.22 have some problems to recognize the roms in SD's. MAybe it can be a compatibility issue, because LumpiStefan says he can flash with 5.22 from SD.
My question is, which card are you using?
I have a crashed OS and my only alternative is loading from a SD . I have a good bootloader and good GSM. I have not bought the card yet that is because I would like to know which brand and size of card are you using for loading from a 5.22 .
thanks in advance
Click to expand...
Click to collapse
I'm using a SanDisk with 256MB...
HTH
Stefan
well i feel like a tard its upgrading now i hope it works its the se-r special edition from xda
I have Qtek 9100, ROM version of this device is 2.17.7.2 WWE.
IPL 2.17.001
SPL 2.17.001
GSM 02.07.10
OS 2.17.7.2
I did the following operations to make the device SUPER CID:
I synchronized the devece with Active Sync 4.1 .
I started aWizard 1.3 beta 1.
I checked options u and e with aWizard 1.3 beta 1.
Then I started Lokiwiz02b and checked option C.
But it did not help.
After that I tried application unlock for SDA, and then started option C with Lokiwiz02b, but it didn't help.
How can I make the device SUPER CID?
Follow instructions here http://forum.xda-developers.com/viewtopic.php?t=47848
You need to downgrade to this rom first ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe
EDIT Further to advice below ignore above advice.
As of now, there's NO FREE option to do CID unlock on Wizard with G4 chip (IPL/SPL end with .0001)
The only way to have CID unlock on your phone is to use the service at http://www.imei-check.co.uk (about US$40)
The FREE option for your device for now is SIM unlock by using Lokiwiz 0.3a
If the IPL and SPL have ".001", don't attempt to flash with existing roms unless the rom explicitly supports the G4 bootloader... there are a good amount of G4 Wizards that are bricks because of this.
alex-urmas said:
I have Qtek 9100, ROM version of this device is 2.17.7.2 WWE.
IPL 2.17.001
SPL 2.17.001
GSM 02.07.10
OS 2.17.7.2
I did the following operations to make the device SUPER CID:
I synchronized the devece with Active Sync 4.1 .
I started aWizard 1.3 beta 1.
I checked options u and e with aWizard 1.3 beta 1.
Then I started Lokiwiz02b and checked option C.
But it did not help.
After that I tried application unlock for SDA, and then started option C with Lokiwiz02b, but it didn't help.
How can I make the device SUPER CID?
Click to expand...
Click to collapse
hi,
im a noob to this forum and pocket pcs and i think im doing something wrong but when i try to install mfrazzz's xda mobile 6 release 5 final. i its still the same old windows mobile 5
i think my cid is unlocked i followed the instructions given by farias thread.
how would i know if the cid is unlocked? i tried using mestrini's WST tool but i get an error.
thanks in advance
thanks for the help
7331ymerej said:
hi,
im a noob to this forum and pocket pcs and i think im doing something wrong but when i try to install mfrazzz's xda mobile 6 release 5 final. i its still the same old windows mobile 5
i think my cid is unlocked i followed the instructions given by farias thread.
how would i know if the cid is unlocked? i tried using mestrini's WST tool but i get an error.
thanks in advance
Click to expand...
Click to collapse
Always post vital data of the phone,untill it's not known which device you have,G3 or G4,it's hard to provide with any help.Post IPL SPL of your device.
If it's a G3 then its CID locked,you have not followed the correct unlocking procedure.Read the Guide and sticky by Dr.Puttingham and follow it correctly to CID unlock the phone.
If it's a G4,then you cannot straight away flash any Rom to it,to upgrade follow the method as Sticky 'SoftSPL or HardSPL' by equinox in G4 forum.
What error it gives while usung WST 4.2 Tool ?
Cheers !
i have a g3, and the ipl: 1.01 (becuase i downgraded because the instructions told me to) SPL : 2.16
and the wst tool give me a "in the rexx script named : at line number :2840"
and is there a way i can change me ipl back to 2.16? cause nothing is working for me =/
thank you for your response
7331ymerej said:
i have a g3, and the ipl: 1.01 (becuase i downgraded because the instructions told me to) SPL : 2.16
and the wst tool give me a "in the rexx script named : at line number :2840"
and is there a way i can change me ipl back to 2.16? cause nothing is working for me =/
thank you for your response
Click to expand...
Click to collapse
ok, you got ipl 1.01 cuz you downgraded with Button's Rom 1.05 but your spl remained unchanged 2.16,its nothing to worry about,it sometimes take a little more tries to downgrade spl to 1.01,flash the Button's Rom 1.05 a couple of more times to make both ipl/spl 1.xx,only then you can CID unlock the phone with lokiwiz 02b.Follow the guide for downgrading and unlocking at the below link and do the method correct.Your phone is still CID locked,untill you get your phone CID unlocked you can not upgrade to any wm6 Rom.
http://forum.xda-developers.com/showthread.php?t=285435
But if you want to go back to your original wm5 Official k-jam Rom and have ipl/spl 2.16,then Download official k-jam Rom 'K-JAM_WWE_216901_2169101_020710_ship.zip' from official website of i-mate k-jam or from the following link below:-
ftp://ftp.clubimate.com
1.unzip the Rom zipfile,get your phone into bootloaders screen (multicolored screen)by pressing and holding down the camera button and the Power ON button together,the phone will start in bootloaders(multicolored screen) it'll show you ipl 1.01/spl 2.16
2.when in bootloaders,connect your phone with pc via usb cable, a small usb written will appear at the bottom of the multicolored screen of your phone.confirm it.
3.open the unzipped folder of the downloaded Rom,run the RUU icon in it(double click Ruu.exe)
4. follow the instructions and flash the Rom,after completion,your phone will restart and start working.
Good luck !
thank you sooo soo much, im gonna try it again right now
i guess my phones SPL will not change. i must of flashed the ROM with buttons 1.05 about10 times but it still wont change .... oh well im just gonna go back to the stock rom my kjam is WEIRD haha
Please Help
Hello
I have the Kjam G3 (with IPL & SPL 2.16) & wm5. I want to upgrade to wm6.1 but the CID is locked. I tried the WST tools and followed the instructions to unlock the CID but nothing happened.
Please can any body help me to solve my problem and tell me any other way to unlock and where to download the wm6.1.
THANK YOU
READ the FAQs, they hold all of the answers that you need.
Right, I have a massive problem.....Been debranding HTC and all for ages now using this great site. But now it happened. I was trying to install WM06 on a charmer and well my comp froze partially in the process....Now I can get to the tri-color screen but cant flash there oddly enough. And when I normally start it, I get the splash with the info
IPL 2.06.0001
SPL 2.06.0001
GSM 02.69.21
OS 6.1.0.0
The major issue I have is when I use USB TTY, it says not the proper security level. I know many wrote bout this issue already but jst seconds before I unlocked the phone using Lokiwiz so I thought I am CID unlocked??
Any help??
I have a Herm100 (O2 Xda trion) i tried to upgrade the rom from sd card the offical HTC rom i did the update after then the phone dont want to load in after the boot screen it stucked.
I have:
IPL 1.04
SPL 2.03
all the time i try to upgrade from 2.03 to 2.10 it says 00028002 or 00068002
I tried several procedure but nothing worked please if somebody can halp PLEASE HELP!: confused: