Has anyone successfully been able to flash by SD card via bootloader 5.22 or successfully been able to change bootloader 5.22 to 5.15?
Just wondering :?
I used both 6.22 and 5.17
my 6.22 was successfully downgraded to 5.15 using XDATools
my 5.17 was upgraded using SD Flash method with 2 step: boot using wallabypatch and then flash using ROM written to SD card
never try with 5.22 but it supposed to be working without any problem
erickbryce said:
Has anyone successfully been able to flash by SD card via bootloader 5.22 or successfully been able to change bootloader 5.22 to 5.15?
Just wondering :?
Click to expand...
Click to collapse
Have flahed via Bootloader 5.22 about 20 times.
Haven´t any problem until now....
Stefan
ok with 5.22
I've flashed the ROM afew times with 5.22 and Programme A method through XDATools.
Bootloader 5.17 problems
Hi,
Read this thread with some hope for my now paperweight xda1.
Tried to do a radio stack upgrade and crashed the whole thing.
I am using the xda tools to write to and SD Card.
When inserting the card and doing a power button/soft reset the bootloader starts but does not recognise the rom on the sd card.
All I get it the coloured screen showing GSM fail.
Can someone help me out here I must be doing something wrong when trying to reflash the rom.
Currently
Bootloader 5.17
With a stuffed version of 3.20.6 which presents me with a blank white screen when started normally.
Thanks in advance.
which card?
I heard that 5.22 have some problems to recognize the roms in SD's. MAybe it can be a compatibility issue, because LumpiStefan says he can flash with 5.22 from SD.
My question is, which card are you using?
I have a crashed OS and my only alternative is loading from a SD . I have a good bootloader and good GSM. I have not bought the card yet that is because I would like to know which brand and size of card are you using for loading from a 5.22 .
thanks in advance
Re: which card?
sadboy said:
I heard that 5.22 have some problems to recognize the roms in SD's. MAybe it can be a compatibility issue, because LumpiStefan says he can flash with 5.22 from SD.
My question is, which card are you using?
I have a crashed OS and my only alternative is loading from a SD . I have a good bootloader and good GSM. I have not bought the card yet that is because I would like to know which brand and size of card are you using for loading from a 5.22 .
thanks in advance
Click to expand...
Click to collapse
I'm using a SanDisk with 256MB...
HTH
Stefan
well i feel like a tard its upgrading now i hope it works its the se-r special edition from xda
So I went through the Siemens upgrade utility to upgrade my phone to wm2003,...during the radio stack update, it failed, and the whole process failed....there was no longer a protocol or radio stack version when booting...
I have done a flash of the wm2003 software, but it just freezes on the boot screen, all it shows is the 'Designed for Windows Mobile' screen with the AT&T Wireless logo, with A.30.09 showing, G and R are both blank...
is it possible at all to Flash a Radio Stack? I can't connect to my device and run any rsupgrade stuff because it just sits in the boot screen...is it fried? or is there a solution???
Thanks
If you can't access the device through USB ... AND ... you get "GSM error" in the boot loader screen ... AND ... you can't charge your device
then yes your RSU is damaged ... you better to send it to repair
Hi, I'm having some trouble with my phone. Whenever i start it up it goes into the 3 color mode(I accidentally deleted the software from it) and I can't connect it to my computer through usb(it doesn't see the phone). How can i restore my phone? Can i flash a rom to it with the SD card? If so, how would i go about doing that? Any help would be really appreciated. Thanks!
if it runs in to tri colour bootloader, tell us the bootloader version...
or just terminated the activesync (wcescomm.exe) process frm task manager..
run mtty and do the reflashing again (in case U already downgraded ur bootloader
typhoon
IPL 1.00
--------------
Typhoon
SPL 1.01.0064
--------------
Typhoon
MTTY don't gime option for USB
Teach me how to boot from SD card?
I've made something wrong during reinstalling OS on my T-mobile SDA smartphone. There is no any way to enter into boot loader, just blank white screen. So what I want to try is to boot OS from SD card.
Can anybody give me instructions which file to put on SD card and how to boot it again?
I will apreciate any kind of help.
I tried the oldest DFT WP7 rom (7004),but I could not boot into WP7.Stuck at DFT logo,I tried to put my microsd card and my sim card out of my phone but it did not work for me.
In addition to other rom such as Pdaimatejam_Rom(7740),HD2O (7720), Back to the future,It could not boot too.Same problem,Stuck at DFT or HTC logo before boot into WP7
I tried to task29 and installed magldr and flashed WP7 rom again in serveral times but it stuck at logo again and again.
My micro sd card is SanDisk 8gb and 16gb class4.It could flash wp7 rom and
boot correctly in the past.Today,It can't boot.
How to fix it back to normal to boot correctly into wp7 ?
Sorry,Has anyone known how to fix this problem?
Hi!
Sorry to hear that you have so many problems with your HD2 Am I to understand correctly that you are unable to install any WP7 release now? If that is the case here are a few ideas that have helped me and others in here:
1. Format your SD-card in a Nokia device or in Linux (I do that) and make a fresh install with the desired ROM (please delete SD mbr and activate extra Nand before installing!)
2. Try to flash a WM6.5 release onto you phone first (beware - this will uninstall magldr!)
3. Try to install WP7 without SD card and when you have booted and phone is running ok insert card and make a hard reset using magldr.
If I have misunderstood your question I'm sorry - Please let us know how things turn out for you!
/Anders
and check if HSPL 2.08 installed
Thank ! Anden1986 and dxdy for your answer.
1. Format your SD-card in a Nokia device or in Linux (I do that) and make a fresh install with the desired ROM (please delete SD mbr and activate extra Nand before installing!)
2. Try to flash a WM6.5 release onto you phone first (beware - this will uninstall magldr!)
3. Try to install WP7 without SD card and when you have booted and phone is running ok insert card and make a hard reset using magldr.
Click to expand...
Click to collapse
still stuck at DFT logo.
Even I restored hspl 2.08 to spl2.08 and changed it back to hspl2.08,I also stuck at DFT logo agian.
Normally,I can use wp6.5 and android (nand/sd).
I have problem with WP7 only.
then is microsd card problem... did you try boot without card? if WP7 already flashed just do hard reset and boot without card
Boot without sd card,I already tried,it don't work.
seems problem in ROM....
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was task29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
to the rescue !!
Jaimelebrone said:
HI everyone,
This is the first time for me posting a thread here...thanks in advance.
Well I have a HTC HD2 that is a friends of mines. He was trying to change the radio so it could work in another country and managed to brick the phone. He got tired of trying to fix the phone so he gave it to me. I have tried fixing it with a tool kit I downloaded in another thread here. I managed to get it to boot butt it wouldn't get past T-Mobile screen...I kept on messing with it trying to install a ROM and different radios but non will work and wont turn on anymore but still is able to be recognize but PC(not mobile media center) and the last thing I did was tasIt29. It stopped at 99%...still can load bootloader 3 colors but having a harder time getting the phone recognize by PC. Can anyone help me before I get into a deeper hole? If your need any more detail please ask me...btw the phone is running SPL- 3.03 HSPL in boot loader.
Click to expand...
Click to collapse
your friend shouldnt have flashed the radio without proper info !!
radio is the only thing which bricks the device !!!
dont worry we'll try to sort something out !!
firstly start with flashing a proper radio !!
http://forum.xda-developers.com/showthread.php?t=611787
download the radio 2.15.50.14 from this thread and flash it !!
NOTE : if you cant flash radio from ur pc, via nbh installer or the toolkit, you can flash it from a memory card !!
just format a normal memory card, put the radio on the card, rename the radio file to LEOIMG.nbh and get to the bootloader screen !!
follow the instructions from there and flash the radio !!
secondly if you want android or wp7-7.5 on ur device !! hspl 3.03 wont work !!
so install hspl 2.08 for that !!
for winmo6.5 3.03 is ok !!
do a task 29 once and flash any rom or magldr(for android or wp7-7.5)!!
good luck .....
thanks for quick reply
I am trying to do what you instructed me.
Didn't work
I tried it on the PC and it sadly stopped @ 96%, now it wont turn on volume down+power. Battery was charged and i didn't turn off. It displayed error 262. as soon as I can I will try it on sd card. Thanks though.
I was not able to install the radio but did in fact get to task29 successfully and MAGLDR Version-1.13. Now my phone is stuck in the Stick together screen. Can anyone help me from here what should I do. thanks I will be waiting for a responce.
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
The thing is that I can't get any ROM's to finish installing...in the SD card the power button does not work...and in the computer the fartest I gotten was 99% but always stops and gives me error ussualy Error 262. Ireally don't know what to do. MY friend said he took it to an Asian Guy...I noticed that the battery S/N does not match the phone...can this have an effect...I haven't been able to flash any ROMS successfully not even the debranded stock. I flashed several phones and installed many different custom firmwares but this phone has been a real challenge...I'm over 2 weeks in...Thanks for the help thus far you guys are the best...
leoimg.nbh won't start to install
Hi everyone,
I have a severe problem with my HTC HD2 after installing a NAND version of android which did not work very well, than wanting to reinstall winmob 6.5 (vodafone) it startet "loading" the leoimg.nbh from the SD-card, but than stayed in this status neverending. So I interrupted (was that the mistake?? :-( }. Now I'm able to start MAGLDR 1.13, am also able to install another NAND version, but with every version I get the message: problem with android.xxx and so on.
I can start the bootloader modus (SPL-2.08.HSPL 8G XE), also connect by USB, but if I try to reload any leoimg.nbh from SD card - it does nothing, just stays in the bootloader modus.
Did I destroy any hardware by interrupting the non functioning "loading"?
Please help, if you can, what I could do now to get a functioning NAND android again!
Many thanks in advance!!!
freak just try the task 29 and u might return everything to normal condition
and for future never interrupt the installation process as u can brick ur device
for the main topic, i can say that ur device is fully bricked and the only way is taking it to the service center or try flashing directly into the hardware, but thats dangerous and requires professional skills
Plz help!
bigtobitobs said:
Do you still need help cos its really easy to unbrick your phone and I say this because once I flashed 5 different roms in 2 hours or less and my phone wouldn't even turn on and when it did it would get stuck on the tmObile splash screen and restart but I fixed it and now I'm running the best Rom out there lol... reply to this thread and I'll tell you what to do
Sent from my HTC HD2 using xda premium
Click to expand...
Click to collapse
Please can you help me.. I did the same thing.. it kept getting stuck at 0% and then i had to wait like an hour and then i tried again.. now its completely dead!
Please tell me what to do..
Thanks
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
it's revived!
powerofthink said:
First of all; This steps can solve your problem. But first of all(don't forget to check 2.08.HSL) try to use "Task29" and if it is success, load Radio ROM 2.15.50.14, and load original Winmo 6.5 ROM (Tmous or EU which phone do you use).
If you are stuck somewhere, then;
Download an original ROM for your HTC device from HTC webside.
- Format your SD card like FAT32 primary.
- Take "RUU_signed.nbh" from an original ROM and copy it to your SD card.
- Rename to "leoimg.nbh"
- Reset your device while pressing the volume down button.
After several attempts to switch on the phone it finally turned on so I immediately installed stock ROM and it didn't get stuck on 0%.. it worked!!
Do you think I should perform a task 29 now or I can just proceed with installing a new radio and then installing a new ROM?
Thanks again mate!
Apparently I need to install SPL 2.08 before trying to install HSPL and then run android.. anyone know where I can find it?
Nevermind figured everything out Thanks anyway
Click to expand...
Click to collapse
If you want to change your ROM with one another like Android NAND ROM or Windows 6.5 ROM, then use this procedures.
For NAND Android ROM; You must flollow this sequence;
first check your device if it is 2.08.HSPL, and format your sdcard ext3 or ext4 and 1gb (which one you must use is pointed out by your Android chief). Copy new Android ROM into your sdcard's FAT32 section. insert it into your HTC device.
1. do task29
2. instal radio rom 2.15.50.14
3. install magldr 1.13
4. do recovery 5.0.2.6
5. do clear cache and dalvik cache.
6. Choose your android ROM .zip file on sdcard, load and enjoy...
For Windows 6.5 Follow this sequence;
first check your device if it is 2.08.HSPL, Format your sdcard like FAT 32 primary partition. insert it into your HTC device.
1. do Task29
2. Install Radio ROM 2.15.50.14
3. Run LeoCustomRUU.exe like "Run as Administrator" which Windows 6.5 rom you chose to use.
Radio ROM 2.15.50.14;
Radio ROM 2.15.50.14
HD2 Toolkit 4.2.0.1; ( contains task 29, magldr and recovery and also HSPL)
HD2 Toolkit 4.2.0.1
ActiveSync
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Zerocool_uia said:
Hi..
I am new here...
I would like to ask about my htc hd2..
I ve installed android 2.3 and yesterday i tried to update to android 4.0 but something went wrong and now my phone can't load anything...
when i tried to install ROM, it shows phone is not connected...
My ActiveSync also doesn't detect my phone... I can't enter to phone settings coz the phone won't load...
Any ideas ?
Thanks...
Click to expand...
Click to collapse
Are you booting into bootloader and connecting the device to your computer so you can get the HTC Sync connection. Just boot into bootloader by holding the volume down button down and poewering on your device. Connect it to your computer via USB and when you see Serial in the white bar of boo5tloader change to USB you have the HTC Sync connection and can flash your device.
I face a very odd problem with my HD2 EU. After years of 2 different versions of Android on nand I decided to reset it to stock(Vol down+power with leoimg.nbh in root of a FAT32 formatted microsd). When I get in bootloader mode there seem to be 2 instances of bootloader. The first 3 colour screen with all the right wordings lasts a second or two then I get a second 3 colour screen with the same wordings. With my Verbatim 8Gb class4 microsd formatted FAT32 and leoimg.nbh (obtained from the original RUU_Leo_HTC_ITA_1.66.408.1_Radio_15.32.50.07U_2.07.51.22_2_Signed_LEO_Ship.exe) in the root directory, the device does not recognize the file and it's not possible to restore the phone to stock, but I can only get into usb connection.
Being able to get in usb mode with the various versions of HSPL (1-2-3-4) I can still change the bootloader. With the HD2 Android toolkit 4.2.0.1 I can install cLK, Magldr, do a Task29 and repartition.
When I use the RUU installer I can install the RUU_signed.nbh that I used to get the leoimg.nbh BUT when I do it, and it does finish gracefully, on the screen that states the currently installed image THE INDICATION OF SUCH AN IMAGE IS BLANK whilst the name of the image to install is the one I am flashing.If I reflash the same image AGAIN (so I know what's on the device) the info of the installed image is never displayed.So after trying the various bootloaders HSPL and SPL and getting the same result you are my only resort.
Has anybody experienced such a problem? It is as if the the bootloader goes through a script that then starts a second "identical" bootloader (I understand that I may seem crazy) that is not capable of recognizing a leoimg.nbh. All my buttons are still working so it's definitely not a button problem. Therefore in a nutshell the question is: if I can't get the device to recognize a leoimg.nbh is there any other way to make it do so, given that I can communicate via usb without problems ?