My XDA cannot be power on after i pressed the wrong switch (soft reset Switch) after updating the ROM with SDcard method.
I cannot enter the wallaby mode, do the soft reset and hard reset.
But it still can be charge.
Can anyone help please please please please.???????
If it will make you feel any better, you didn't press the wrong button.
So something else must have went wrong!
BTW what ROM did you upgrade to?
Oh yea!
You did remove the SD card after you did the upgrade, Right!
Re: Help, I pressed the soft reset button after updating the
KENDU said:
My XDA cannot be power on
Click to expand...
Click to collapse
Got it in this state just once. Have you tried removing the SIM, then hard-reset - then Wallaby. I think there is a major boot delay without the SIM present - it was a while ago that I had this problem - but I did get back from it!
Thanks for the replies Guys.
But I tried to make s hard reset with or without then SIM Card it also doesn't help.
It still can be charge but it won't switch on or go to bootloader mode.
Is there any key combination to get into bootloader mode or to do hard reset?
What is cold boot?
Cold Boot and Hard reset are the same thing.
Related
Hi,
I am puzzled by the fact that I cannot hard reset my device at all via the hardware buttons. I can hard reset via clear storage, but cannot hard reset by holding explorer and gps button + soft reset button. This just doesn't work for me. The device does nothing. Any suggestions?
Thanks for your help.
fried_potatoes said:
Hi,
I am puzzled by the fact that I cannot hard reset my device at all via the hardware buttons. I can hard reset via clear storage, but cannot hard reset by holding explorer and gps button + soft reset button. This just doesn't work for me. The device does nothing. Any suggestions?
Thanks for your help.
Click to expand...
Click to collapse
Strange, with my device it´s the other way around. Can HR via buttons but not via clear storage. If someone has an solution for one or even better the both of us....don´t hesitate.
Hold the stylus pressed in that hole.
Press the two magic buttons.
Remove the stylus but keep the buttons pressed until you see the "welcome screen".
OK now?
Figured it out
Bloody HTC...trinity can HR with device off. Was use to that. With Polaris, it is required to have device on!
So Thanks Dimitri,
You order is correct. Just that the device must be turned on and booted into WM6 OS.
With regards to Clear Storage. Not sure how I can help. Could it be your ROM? I've only Clear Storaged with two ROMS. Bepe and the original manufacturer's ROM (Taiwainese Version). Had to reflash to Bepe to get English. Maybe try a different ROM?
Is there a way to do a hard reset when the screen freezes upon start up? The rom installed fine but when I went to change the theme it froze. I tried to do a soft reset but that is when began to freeze.
waltzag said:
Is there a way to do a hard reset when the screen freezes upon start up? The rom installed fine but when I went to change the theme it froze. I tried to do a soft reset but that is when began to freeze.
Click to expand...
Click to collapse
You need to either hard reset or reflash DCD. How many programs did you install before this theme. Could be a bad file or another program you installed. Your phone isn't bricked, it's just stuck.
These are bricks.
Can you tell me how to do a hard reset? The only hard resets I've done are through the settings but I cannot get there. I have heard before that you can push a bush of hard bottuns all at once to do a hard reset. Is this right? Also, how do you do a reflash?
waltzag said:
Can you tell me how to do a hard reset? The only hard resets I've done are through the settings but I cannot get there. I have heard before that you can push a bush of hard bottuns all at once to do a hard reset. Is this right? Also, how do you do a reflash?
Click to expand...
Click to collapse
Hold both softkeys (next to red and green phone buttons, not windows or ok buttons) while pressing the reset button with your stylus. You will lose all your data and the phone will be reset to original default settings.
I won't explain flashing, read the Titan wiki in my signature.
Ok I flashed to 20270 rom, and my phone was fine for a while i removed the sd card, and it started a soft reset loop, It will continue to soft reset randomly regardless of if the card is inserted or not does anyone else know why?
Possible the reset button stuck in the "in" position?
Nope the Reset button isn't stuck simply resets at the same place every time if I hard reset it, the loop begins when i reach the end of the align screen setup, It also doesn't soft reset while it's connected to my pc via usb cable
the newer roms require Olipro 2.4 Unlocker. Go to your boot screen (hold power + camera button and hit soft reset) and make sure it says Olipro 2.4. If not, you need to remain in bootloader and unlock it with Olipro 2.4. Good luck!
I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.
AdrianW said:
I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.
Click to expand...
Click to collapse
So you can't get to the bootloader? (holding down vol down from a cold boot)?
Does it show the version information down in the bottom corner when starting?
I've tried many times but nothing happen.
No there is no info about rom/radio etc.
Have you got any ideas how can I get to bootloader?
Remove the SD Card and boot the phone.
Just to confirm you can't get into BootLoader mode - Press and hold the Volume Down button then tap the Power button. Don't let go of the Volume Down button until the Bootloader screen apears.
Thanks, I know how I can get into BootLoader mode but that doesn't work.
Any other ideas?
There is no other way to get into BootLoader mode.
Have you tried booting without the SD Card and checked that there is no bent battery pins?
It may be a faulty volume button or other hardware issue.
If it was a faulty ROM or RADIO then you would still be able to get into BootLoader.
Hi everyone,
Could anyone please help me?
I tried to Hard reset my phone (Lenovo Phab 2 PB2-650M), but then the power button won't work even pressing the Volume button down don't work too. In the end my phone just turned on and nothing happen, also with the Factory Reset in settings, once I press the Factory Reset Button and yes it will restart then boot again (same scenario), then will turned on and NOTHING HAPPEN again. :crying::crying::crying::crying::crying: Please help me fix my phone. I need it badly. Thank you in advance!