I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.
AdrianW said:
I bought the HD2 few days ago, I dont know what the last owner did but HD2 doesn’t wanna start, just stuck on O2 logo and that’s it.
I’ve tried to do hard reset or bootload but ineffective. Can you maybe help me? Thanks in advance.
Click to expand...
Click to collapse
So you can't get to the bootloader? (holding down vol down from a cold boot)?
Does it show the version information down in the bottom corner when starting?
I've tried many times but nothing happen.
No there is no info about rom/radio etc.
Have you got any ideas how can I get to bootloader?
Remove the SD Card and boot the phone.
Just to confirm you can't get into BootLoader mode - Press and hold the Volume Down button then tap the Power button. Don't let go of the Volume Down button until the Bootloader screen apears.
Thanks, I know how I can get into BootLoader mode but that doesn't work.
Any other ideas?
There is no other way to get into BootLoader mode.
Have you tried booting without the SD Card and checked that there is no bent battery pins?
It may be a faulty volume button or other hardware issue.
If it was a faulty ROM or RADIO then you would still be able to get into BootLoader.
Related
Hi everyone,
Before opening this thread i have done a lot of search about my problem but i could not find any solution. My pocket pc is HTC Touch 3450, it works fine but i want to unlock its CID. I tried every combination to enter bootloader mode (CAMERA + SOFT RESET, or CAMERA+POWER+SOFTRESET etc.) but when i try, it boots normally. Also there is no SD card in it. As i said everything works fine. I tried to upgrade its ROM but i got CONNECTION error in %0 of progress. I know to upgrade ROM i must enter bootloader but as i said i cannot. Also i can try to upgrade ROM via SD card but again i have to enter bootloader mode, but as i said i cannot.
When i try to enter bootloader mode it boots normally and begins the system and works everything fine. I dont know its history, i mean its my new second hand phone.
Anyone, any idea? Please help me!!!!.
Same problem here - 155 views and no answers
Phone turned off. Hold down camera button, press power button to boot, while still holding camera button until the bootloader appears...
If you can't get your device into bootloader and you have tried all options, which it seems like you did. Consider the fact that you may have a clone, where did you purchase the phone from? This issue has been mentioned before, and that was the answer to why the bootloader wouldn't load.
Easy way to tell is check the battery, it'll say HTG instead of HTC.
Tried that matey - no good.
You see I thought that mine was a clone due to the trouble getting into bootloader, but I can see no other reason to believe its a clone, Battery says HTC as well.
I have had plenty of experience updating roms on htc devices but this has me stumped.
unfortunately it is a HTG battery, then it is a clone When i try the combinations, (power off then push power buton+camera button) it doesn't enter bootloader mode.Now i knoe that the problem is being a clone.
My next question is, what is the way to enter bootloader in clone HTC (HTC with a HTG battery)?????
Thanks
same problem. please help
crypto 2008 , same problem here.nobody knows how to do this. please help
It's the same problem for all clones.
Seems there is no way to enter the bootloader mode
Clones enter bootloader by holding the volume slider UP and pressing reset. If you hold the volume slider up and hold the camera button and hit reset you can hard reset it.
Hd2 UP ROM death, not enter bootloader (not the screen). Now the machine does not boot up anymore
You do not have any solutions?
MTTY not receive?
Please help me the solutions? Thanks
funtigers said:
Hd2 UP ROM death, not enter bootloader (not the screen). Now the machine does not boot up anymore
You do not have any solutions?
MTTY not receive?
Please help me the solutions? Thanks
Click to expand...
Click to collapse
check your battery pins, might be bended and do not touch the circuit.
pin 80%, but not enter bootloader
funtigers said:
pin 80%, but not enter bootloader
Click to expand...
Click to collapse
Like said earlier, pin could be a problem, or try a reset by pressing the red pin at the back after opening the battery cover. Or take it to the service center!
Laptool not support chip flash hd2, hic
funtigers said:
Laptool not support chip flash hd2, hic
Click to expand...
Click to collapse
Please help me solution jtag HD2
hd2 boot
I had an incident in which I was installing a program and after the restart, it didnt boot past (orange) windows screen. I thought I bricked it but I looked up a factory forced reset. Maybe it'll work for you.
With the phone off, press and hold the vol up, down and power button together then release them together to start up. After it starts up, it will ask you if you want to do a factory install, press vol up button and PRESTO! it SHOULD be back up and running. Hopefully this will help.
Hello,
I wanted to ask if someone clashed with problem like that and knows how to solve it. I had 1.66 rom eastern euope and installed 2.08hspl, tried to install latest magldr and I am guessing problem occured because I didnt installed latest radio. Now when I am turning on the phone it shows white screen and green logo and stuck. Tried turning of the phone and holding - volume button when turning on that didnt make any difference can someone help me to revive my phone ?
So you tried to get into bootloader, but the thing is you have to try harder.
Bootloader should work just fine.
So again, turn of your phone. while the phone is turned off, keep the vol down, and press the power button.Release the power button, but keep the vol down pressed.
You can try the other way: hold the vol down pressed and reset the phone(red button on the back).
If you want to use the SD card method to flash something you still have to enter the bootloader, so you must keep trying.
Forgot to ask: did you manage to enter the bootloader or not, cause you only said it did not make any difference????.What does that mean?
I already trying to enter bootloader for the five hours, so I guess it's impossible, also tried that thing with red button it didnt load up that bootloader screen. The thing is that holding volume key down didn't work for me before to get into bootloader even when the phone was ok but it did install all roms which I tried so I didnt think that this would be problem either apparantely it is... Maybe youu have some other suggestions how to fix it ?
If you can make the pc recognize the HD2 then you can flash anything.
But i think that this is only possible in bootloader or windows or android.
So this is a problem.
No ideea for now.
Anyone help???
But you *do* push both vol. down and power buttons and keep them pushed until the screen turns on, don´t you?
I didn´t get into the bootloader as long as I didn´t kept both buttons pushed long enough... had to learn the "timing" kind of...
Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
emclondon said:
Hey guys,
So I've decided to flash my mates hd 2 with win 7.
i downloaded the rom from the forum which has the loader (i think).
i watched the video demo on youtube and followed the instructions there.
when I boot up the phone after rom updater, I can't get into the bootloader! all I can see is htc logo and nothing happens.
What do i do? Have I bricked the phone?
Please help!
Click to expand...
Click to collapse
With the phone turned off, hold the volume down button on the side of the phone and press the power button. Keep holding the volume down button until you see the tri-colored screen (this is bootloader).
at this point i would suggest you flash task29, enter tri-colored screen again (bootloader), then flash magldr v.1.12, then let the phone boot into magldr, choose option 5 and flash wp7.
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
emclondon said:
Hi,
I cannot get into the tri-colored screen now! thats my problem. I updated HSPL to *.HSPL, and tried updating the rom and this happens!
I have tried the reset method by holding Vol + and - keys with Power button, but that doent help too
how do i used task29 when i cant get past the HTC logo on the phone?
Click to expand...
Click to collapse
try soft reset. remove the back cover then press a blunt pointed object such as a pen or stylus into the reset button to the bottom left of the SIM, near sd slot, and release. The phone will then reboot. try to get into bootloader as soon as it restarts
hi, i tried installing the rom again, and i get some cpp error?
dont know why.
i tried reverting back to stock rom, installed it successfully, and now when I unplugged the mobile, it turns off. when i plug it in it turns back on and it loops at HTC logo i mean, I turns itself off and turns itself on.
why do you think this happens?
Hi,
The problem is When I plug in my phone to USB, it boots up shows a HTC logo, with
R 2.06.51.07
G 15.30.50.07 U
D 1.66.76641
written in red on left corner and holds on for a few seconds and turns off, and turns on itself.
end note: the phone only starts when I plug it to USB, else its a brick
Hello guys,
I don't know how to really mess with rooting but i thought id give it a try with my one plus 6t.
But after trying to do the steps its not stuck on a black screen that has an orange exclamation point and sat the boot loader is unlocked and software integrity cannot be guaranteed. any data store on this device may be available...
I am using a Mac computer to do this and don't have a windows pc.
Can someone help me fix this phones its just stuck on this screen and wont do anything aside from turning it on and off.
I cant post any images becuase i dont have a nother phone, smh.
solve it via the forums ty
i dont know how to close close this post now
how did you fix it? mine is doing the same thing
i press the
ericv99 said:
how did you fix it? mine is doing the same thing
Click to expand...
Click to collapse
Hey ericv99,
I pressed the volume up and power button to reset the oneplus. then once it was off i press the volume down and power down for a while and it booted into the boot loader screen. then i went on my mac and sent the lineage operating system to my phone via android file transfer. took me a bunch of tries at first since i dont know what im doing but it worked.
i cant boot into any system only boot loop or bootloader
ericv99 said:
i cant boot into any system only boot loop or bootloader
Click to expand...
Click to collapse
which one is it the one that says "the boot loader is unlocked and software.." or is it the one that lets you see the phones serial code info and you can control the phone with the volume up or volume down and the power button ?
it bootloops in the "bootloader is unloicked and software" but i can get into the bootloader that has the serial info
ericv99 said:
it bootloops in the "bootloader is unloicked and software" but i can get into the bootloader that has the serial info
Click to expand...
Click to collapse
ok, yea thats the part that took me a while to get past, you have to basically turn off the phone with volume up and power bottom then once its off you press volume down and power bottom for what seems like a long time. to turn it back on and get past this screen.
It might take 3-4 tries to get it right but it should take you past that screen and onto the serial info screen.
i can get into the serial screen. ive flashed twrp. it cant get into that because of that stupid software screen