Ok I flashed to 20270 rom, and my phone was fine for a while i removed the sd card, and it started a soft reset loop, It will continue to soft reset randomly regardless of if the card is inserted or not does anyone else know why?
Possible the reset button stuck in the "in" position?
Nope the Reset button isn't stuck simply resets at the same place every time if I hard reset it, the loop begins when i reach the end of the align screen setup, It also doesn't soft reset while it's connected to my pc via usb cable
the newer roms require Olipro 2.4 Unlocker. Go to your boot screen (hold power + camera button and hit soft reset) and make sure it says Olipro 2.4. If not, you need to remain in bootloader and unlock it with Olipro 2.4. Good luck!
Related
My XDA cannot be power on after i pressed the wrong switch (soft reset Switch) after updating the ROM with SDcard method.
I cannot enter the wallaby mode, do the soft reset and hard reset.
But it still can be charge.
Can anyone help please please please please.???????
If it will make you feel any better, you didn't press the wrong button.
So something else must have went wrong!
BTW what ROM did you upgrade to?
Oh yea!
You did remove the SD card after you did the upgrade, Right!
Re: Help, I pressed the soft reset button after updating the
KENDU said:
My XDA cannot be power on
Click to expand...
Click to collapse
Got it in this state just once. Have you tried removing the SIM, then hard-reset - then Wallaby. I think there is a major boot delay without the SIM present - it was a while ago that I had this problem - but I did get back from it!
Thanks for the replies Guys.
But I tried to make s hard reset with or without then SIM Card it also doesn't help.
It still can be charge but it won't switch on or go to bootloader mode.
Is there any key combination to get into bootloader mode or to do hard reset?
What is cold boot?
Cold Boot and Hard reset are the same thing.
Well I installed card export, and got some errors, after like the 2nd error my 9100 resetted itself and is stuck in the boot screen with cloads now.
A hard reset is no go, just behaves as a normal reset, and I'm pretty sure I red about this problem in another thread somewhere here, just can't seem to find it.
Anyone got an idea?
The only thing it shows now is:
IPL 1.01
SPL 1.01
GSM 1.13.10.0
OS 1.6.7.1
I am also stuck on the boot screen after my ROM update froze! Is this device now dead?!?! Please tell me there is a way to fix it!
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Got it!!!
Hold down the Voice Button plus the Camera button at the same time and hit the reset button. That takes you into bootload mode. Then you will have a USB connection to the PC - not via active sync. Run one of the RUU update programs and you will be back....
At least it worked for me!
as it did for me
kjk said:
Press and hold camera button and press resett button while you holding camera button.
now you enter bootloader (tree color screen) connect device to pc and run update you had on your device before it crached
Click to expand...
Click to collapse
My soft reset button is not working. I can only reset by taking battery out of mda. What to do now? Help!
I have the problem that whenever i reset m Hima and press other buttons at the same time (like for a hard reset or to enter bootloader), the device will just turn off.
However a normal soft reset does work.
All the buttons are working withing WinMobile.
An idea what this could be?
I installed this HTC Touch Keyboard + Keypad.cab on my mega and it won't boot anymore. It shows the carrier splash screen, but it won't boot up.
Did you try a hard reset?
i did
Am incercat . At that moment i managed to solve the problem. The device is unable to boot screen popped up in the end. and i just pressed vol -. Now i have the problem again. Worse. It won't get passed the carrier logo. What can I do?
Are you sure you performed a HARD reset? Hold the volume keys down when you turn it on then press volume up to reformat the phone, it should boot.
To do a hard reset follow the steps above:
1. Turn off the phone.
2. Press both the Volume Up and Volume Down
3. While keeping pressed volume Up/Down keys, press power button
4. You should see a RGB screen and then a message asking you to press volume up to do a hard reset. Do it.
5. Wait for the process to complete and you will have a clean phone.
If that won't work, you can try to flash the phone with the rom here:
http://htcpedia.com/ruu_mega_htc_europe/soft/mega-touch2-rom?page=2?page=2
Please do not forget to hard reset after flashing.
If even this will not work, you have a hardware problem and you should have your phone checked by a service.
Hope this helps.
Good luck!
it worked with hard reset
thanks. it worked with a hard reset.
Hi guys,
i have a very strange problem. One hour ago i have reset the my Acer and now don't boot!!!
The system is lock to the first image (Ver. Rom and logo ACEr) and remein here.
The monitor after two second going in sleep mode.
I have tried reset, battery pull-off, but the problem remain...
Please Help mE!!!!
Ver. 3003, ITA
Rom Official Acer
HELP ME!!!
Have the solution!
If your screen is not responding to stylus input: Hold the Volume up and Volume down buttons while pressing reset until the screen shows “Clean Boot”.
Resetting your Acer S200 smartphone
You may have to perform a reset if your smartphone fails to respond when buttons are pressed or the screen is tapped.
Note: Before performing a reset, ensure that your smartphone is
not locked. Press any key or tap the screen to see if the phone
responds.
Reset
A reset will clear the RAM of your smartphone. It is similar to turning a computer off and then turning it back on.
Important: To reduce risking damage to your smartphone, only use the supplied stylus to reset the device.
Use the tip of your stylus to lightly press the Reset button inside the hole on the side of your smartphone.
Clean boot
Warning! You should only perform a clean boot when all other
reset options have failed to restore your smartphone to an operational
state.
This is operation have resume the System!!!!!
For all that have this problem try it!
Thanks for who have found this solution!