Hi, ok.. so if I have servise with AT&T (in Canada) should I use the rom upgrade from ATT? currently, i installed WM2003 and works great and the radio Stacks are 6.18. would it benefit me to use ATT Update?2nd thing, I have caller2Picture software for Picture Caller ID, with WM2003, I can't add pictures to my contacts no more, before in the program, it would ask to which number to assign the pic, or all numbers, not it show no numbers and I can't even defin the Ring for each contact. Anyone came across this?
I'd say with 6.18 because upgrading the Radio stack is tricky business.
As far as Caller2Picture goes they're aware of the problems under WM2003 and are working on a update. But in the mean time take a look at
Pic&Ring http://www.xda.com.cn/E/index.htm its been reported to work under WM2003.
Related
I have searched the forums for "Caller2Picture" but have come up with nothing. So here goes ...
I have the i-mate version of the HTC Himalaya with ROM v1.52.00WWE. I have installed the gitex update. I bought my phone from Telstra Australia, which has added some customized software which replaces the photo in the default IA Caller ID program with the Telstra logo!
I downloaded a trial version of Caller2Picture. I installed it in the default directory, then copied all my pictures into the Caller2Picture\Pictures directory. I then set up a ring and called myself with my spare mobile phone.
This is what I found:
1. Caller2Picture slows down my i-mate TREMENDOUSLY. Doing anything introduces an unacceptably long delay. If I try to open any application, I will be staring at the hourglass for about 10-15 seconds before anything happens.
2. When I get an incoming phone call, the picture will appear as is supposed to. However, there is no name assigned to the number, so I see the number (and the picture) only!
Because I cannot live with the above two bugs, I deleted the application from my i-mate. I am still VERY frustrated that I am unable to get Picture Caller ID to work on my expensive PDA/phone!
Has anyone else encountered the same problem - or better still developed a workaround?
That program as been nothing but trouble with WM2003, I think you'll
better luck with:
Pic&Ring ($10.00)
http://www.xda.com.cn/E/index.htm
The application enables you to personalize the incoming call ring-tone and picture according to different callers.
HTH
Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Are your contacts on your SIM or in your devices phone book?
Works fine here by the way.
I have the same problem
Stu
They are on the phone not the sim. This is Windows Mobile 2005 not 2003
Mikee4fun said:
Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Click to expand...
Click to collapse
right, the contact summery comes up but it's empty - the content of the notice field you can see - and you can say "yes" and voice command is calling your contact.
MS Voice Command 1.5 is not supported for WM5
regards,
Udo
--
MDApro
It is a bit sketchy
I can launch programs great, i can call people fine. change brightness.volume and I get announcements such as battery is running out
the only things that don't work is showing contacts and hearing the spoken callerid.
It is going to come down to waiting for an update
I thought mine was working fine too with WM5 but after several days of resets and minor other problems, I finally cleared the device and didn't reinstall VC and now it runs a lot better. so bottom line... VC 1.5 causes problems on the universal... although it seems to work ok.
Uninstall MSVC
Anybody know how I can uninstall it, and get it out of my settings control panel. I used the .cab installation.
I had to use the Erase memory icon in Programs... it clears the entire unit and sets back to factory defaults.
Please anybody try VITO Voice2Go on JasJar. It's a new voice control application for Pocket PC. Supports all languages.
I personally use this program on my i-mate Jam, and it works fine. Want to khow how does it works with Universal.
Product site: http://vitotechnology.com/en/products/voice2go.html
MSVC and Contacts
Has anybody overcome this problem? I just revisited this, and it does appear to work for everything, including dialing the contacts.... but.... I cannot get it to show a given contact. It will open the contacts list, even repeat back the phone numbers its dialling, but will not show the contacts individual details, at all.
Any feedback? Perhaps delete all contacts, and resynchronise them all?
Regards
Simon
It must be just the Jasjar as I had WM2005 on the XDA II and never had a problem.
I couldn't even get the US Version to work, I eventually got the UK version on and working but I have the empty screen issue in contacts.
Voice Command works fine for me. The contact is blank, but the program itself works fine
Well I guess it's better than nothing! I was always under the impression that Voice Command was actually integrated into WM5; seems not.
Hopefully 1.6 will address these issues...
Voice command work well with the 1.51
I have cyberon speed dial installed by default on XDA Exec, it works fine
Am I right in saying that "cyberon" is not the same as VC, you have to record something for every contact you want to use it with.
When you have alot of contacts, even the thought of doing this is stupid, maybe if it was just your family including Grandma that would be fine but when your running a business and your ringing different people all day.........
Maybe I am wrong, i have never used it......
sayreul said:
Voice command work well with the 1.51
Click to expand...
Click to collapse
so your saying there is a voice command 1.51. i can only find 1.5
link?
I feel the same way, I did a Google search and nothing, what is 1.51, are you trying to manipulate us into thinking there is a fix to our problems bought on by micro$oft.
Please let us know....... :shock:
Oddly it worked perfectly on my dodgy beta WM5 on my BlueAngel :S
Found this link from a post in Wizard section yesterday:
http://www.jetwaremobile.com/index.htm
As the doc says this extension has a SIM access profile, I tried this BT extension on my Universal and a Bluetooth Headset SE HBH-662 that has a Caller ID screen. With this BT extension, now the BT headset can show the Caller ID Name IF the contact name and number exists in the SIM card.
However, it will not show any caller name if the contact only exists in Outlook Contacts.
My test also shows, the number stored in the SIM card has to be exactly the same with one sent over by the operator, otherwise it will not show the caller name. Ex. if the operator sends over the caller number as 171xxxxxx and the number stored in the SIM is 71xxxxxxxx then it will not work. Same thing if the number stored in the SIM is +171xxxxxxx and the operator sends the number 1713xxxxxx then it wil not work as well.
I kind of like to use the format +171xxxxxxxx as this is the international format.
Anyway, this is great, as most people have been waiting for this function to work out of their caller ID BT headset. Now, if we can find out how to make it work to access the Outlook Contact, then its perfect...
Can you report back on your experiences with this? I'm reluctant to install it unless it's proved to work and be reliable with my Jabra BT800.
Mach
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
I believe in Jwright's Modified ROM there is an application called "SIM Access" that allows this. I was not able to try it because I don't have a headset with caller name capability. I forgot to copy the "BT SIM Access" application, but already tried it on the latest QTEK ROM a month ago and the application worked fine.
Thanks cktlcmd
Now i search for "Sim Access" in the forum
I keep you update :wink:
Diggia said:
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
Click to expand...
Click to collapse
If you go to Start Menu\programs you'll find the Bluetooth options folder. By the way, don't forget to soft reset first.
I've tried with Parrot CK3100 and now I have the battery and network signal strenght status as well as network name. I'm expecting someone to try with BT800 and to report it.
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Yes, same happens to me.
I have the HBH-662, after installing the software the button on my headset does nothing when pushed, unless it is pushed for answering a call, although the name gets displayed when getting a call, provided that the name is on the SIM card.
The other bad thing about it is, if the name is NOT in the sim, it does not display the number, it displays "Unknown" on the headset!
Good step in the right direction though, now it only needs a few tweaks!
Cheers
JP
on my bt800 don´t show the name of the caller
Same here on my BT800 no name just number
hi,
i've tried out the software but i can't activate voice dial now. how can do?
bball4life said:
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Try checking your "Notifiaction Que". There should only be one sddaemon file. If there is a duplicate then delete it. I use MemMaid for this.
please give me a hand to resolve this problem with vocal dialing.
marcowind80 said:
please give me a hand to resolve this problem with vocal dialing.
Click to expand...
Click to collapse
As I mentioned above, the last time I had a problem with voice dialing was when a duplicated "Notification Que": sddaemon file to be exact, was present. Just delete the duplicated sddaemon file, soft reset, and pair your BT headset again. I used MemMaid's Notification Que to clear duplicated files. I hope this is clear enough.
ok i'll test your suggest....thank you.
excuse me for bad english, i don't speak well this language!
i'm italian
nothing..
not vocal dialing
BT extention
I have another problem in addition to the voice dial problem...... whenever I receive a call from soneone who is using a service provider other than my service provider the device hangs and I have to soft rest the device provided that all the contacts are stored in my SIM card.
Great achievement indeed!!! A first step into a long waited direction
However decided to uninstall it from my Universal, waiting for a new release.
In fact some improvements are required to make it really useful.
I've tried it with my Jabra BT800.
A few issues that I've noticed,
Name displayed, only if:
[list:cca8e10c8e]
Contact present into SIM card.
Outlook phonebook not being used (at least with BT800) despite announced as a feature.
In order for the correspondent name to be displayed, number must be stored into Contacts, exactly as sent by the Operator.
- Some operators do not send the '+CountryCode'.
- This may originate different behaviours for instance depending if user is at Roaming or not.
- Some sort of algorithm would be welcomed to add some "intelligence" here.
[*]If received phone number is not present into SIM card, or not exactly with the same format, 'Unknown' is displayed even in the event of a number being sent... :shock:
The number received should be displayed at these circumstances.
[*]Whenever a Contact name gets displayed, only its first 8 characters are shown.
Much better if complete name contained at Contact, would scroll continuously. :idea:
[*]Voice Speed Dial not working, if JETware Mobile Software is installed.
This is a must, to be solved![/list:cca8e10c8e]
Eagerly waiting for a next release
I agree with the summary listed above. As I listed already in the very beginning of this posting what I found. Yes, its also true that Voice Dialing is not longer working once this app is installed. I did not have Voice Dialing enabled indeed, I tweak the registry so that on the push of the button on the BT headset, it will turn on the BT headset to accept any sound from the PDA instead (I use this for VoIP application).
And now this is not longer working, so similar synthom with the Voice Dialing app.
Once last thing, I cannot uninstall this app.
So for those that have not tried it yet but insterested to try, I would recommend not to try it, just read what we have found so far here, and do not need to repeat the same experience.
Hopefully those guys who write this app read this posting as well and will make the fix.
Not to rain on anyone's parade, but my JAM with its lowly Windows 2003 Mobile SE has been showing the contact name if it exists on the SIM without any modifications on my SE HBH-662.
I made this observation about a year ago on HoFo and six or so months ago right here on XDA-Dev.
This is interesting to say the least.
In the "non-official" imate JasJar ROM releases, there is an option under Phone Settings->Caller ID to show your caller ID to "Only My Contacts". I "downgraded" to the official Jasjar release, and now I only have two options: "No One" and "Everyone".
Anyone know how to get the third option "Only My Contacts" back (without having to flash an entirely different rom?).
Thanks!
it prolly requires the version of pocket outlook in wm6. so no luck. just don't downgrade :¬)
My friend has a DASH running WM5 and he has that feature. I wonder if it's a reg tweak that can enable it. I would love to have this on my official TM ROM.
caller id question
is there any app or reg hack that would let you see the operator from another mobile phone, ie a call comes in from your friend that has Cingular and it shows up as "your Friends #" and the operator from which he is using?
Hi... i tested Crossbow WM6 rom, and Wm5 Aku 3.3, and these work fine, but really for all that i need run better the original Cingular 2.25, but the thing is, that i like the option that have the wm5 aku 3.3 rom, about the capability to can send the call id only to the contacs that you have on the phone, the others not see the numer from one call, but these option not came with the Cingular original room, so y want know if these thing is a member of de OS or came from the radio, (i not use the wm5 becose when use the voice dialer that came with the original cingular rom, on wm6 i cant use it across the BT Head Set, so if i press the button of the BT Head Set, does not call to the voice dialer, but on wm5 yes, i do not wy.
So some one know if the ability to can sen just de caller id to the contacs came on the os or on the radio version ?
Thank's alot