Hi... i tested Crossbow WM6 rom, and Wm5 Aku 3.3, and these work fine, but really for all that i need run better the original Cingular 2.25, but the thing is, that i like the option that have the wm5 aku 3.3 rom, about the capability to can send the call id only to the contacs that you have on the phone, the others not see the numer from one call, but these option not came with the Cingular original room, so y want know if these thing is a member of de OS or came from the radio, (i not use the wm5 becose when use the voice dialer that came with the original cingular rom, on wm6 i cant use it across the BT Head Set, so if i press the button of the BT Head Set, does not call to the voice dialer, but on wm5 yes, i do not wy.
So some one know if the ability to can sen just de caller id to the contacs came on the os or on the radio version ?
Thank's alot
Related
Hi, ok.. so if I have servise with AT&T (in Canada) should I use the rom upgrade from ATT? currently, i installed WM2003 and works great and the radio Stacks are 6.18. would it benefit me to use ATT Update?2nd thing, I have caller2Picture software for Picture Caller ID, with WM2003, I can't add pictures to my contacts no more, before in the program, it would ask to which number to assign the pic, or all numbers, not it show no numbers and I can't even defin the Ring for each contact. Anyone came across this?
I'd say with 6.18 because upgrading the Radio stack is tricky business.
As far as Caller2Picture goes they're aware of the problems under WM2003 and are working on a update. But in the mean time take a look at
Pic&Ring http://www.xda.com.cn/E/index.htm its been reported to work under WM2003.
Hi, i have a Vario from T-Mobile (Austria) with the Rom Version 2.18.7.7Ger. I have the Problem that i cannot use the smartdial feature. when i type numbers - i will always see the numbers but not the name of my contacts. i there a reg-key to enable the smartdial? maybe my provider block the feature (one)? i have founf the smartdial.dll on my device but not the cab file. i have installed the e-ten m600 blue dialer skin but no smartdial.
please help me!
thx
Mike
http://forum.xda-developers.com/viewtopic.php?t=48325[/b]
yes, this is the link from the software that i have installed.
Did you do a soft reset after the software installation? :wink:
yes.
Have you installed cabs from the Extended ROM? There should be a CAB named like smartdialing_enable..
Personally i disabled smartdial. It made dialing VERY slow since i have quite a lot of contacts. It made dialing an unknown number soooo slow...
HI every one,
I use to have a audiovox SMT5600 and a 2125/faraday and both phones had the feature under the phones setting to "send caller ID to contacts only" or something of that nature.
On my Wizard (8125) when I go under phones settings Caller ID properties that feature is not there.
I was wondering if the TyTn ( cingular 8525 (i think)) has that feature.
Would some one be so kind enough as to check for me ?
TyTN doesn't have this option... and I think no WM5 device has it.
Just noticed that this setting now appears in the AKU 3.3 ROM. Pretty cool.
In the "non-official" imate JasJar ROM releases, there is an option under Phone Settings->Caller ID to show your caller ID to "Only My Contacts". I "downgraded" to the official Jasjar release, and now I only have two options: "No One" and "Everyone".
Anyone know how to get the third option "Only My Contacts" back (without having to flash an entirely different rom?).
Thanks!
it prolly requires the version of pocket outlook in wm6. so no luck. just don't downgrade :¬)
My friend has a DASH running WM5 and he has that feature. I wonder if it's a reg tweak that can enable it. I would love to have this on my official TM ROM.
caller id question
is there any app or reg hack that would let you see the operator from another mobile phone, ie a call comes in from your friend that has Cingular and it shows up as "your Friends #" and the operator from which he is using?
Hello,
first of all great site I have to say... got me a lot of help with my new HD2 (switched from Nokia S60 to WM)...
No I'm trying to get my HD2 work as an VOIP Client over pbxes.org.
I found the Cab Files to enable the Voip Settings Tab and the Config-Tool.
Installed both, configured and it's working!
Now I have the Problem that I can not choose wheter to make the Call over GSM or VOIP, It's always dialing over voip (when VOIP connected). There is no config tool/button for manila (HTC sense)...
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
I'm using Nimbuzz, AGEPhone and PortSip as well, everything works with wifi-connection.
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
thommy5583 said:
So is it possible to make a call with gsm (for mobile numbers) when voip is connected?? Or to quick disable VOIP and reenable it after the Call? Any ideas?
Click to expand...
Click to collapse
Try installing something like Second Today. You can enable the internet calling home screen item on it, flip to it when you need to and disconnect the Voip.
fiftyz said:
Hello
Please tell me you figured out how to install voip native windows mobile client?
Because i'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB and the settings from sip provider, it says that is selected on the today screen but when i try to make a call via default HTC dialer it shows Dialing after less than a second a short error tone and the call is not made via voip...
I can't figure out where is the problem with my HD2.
Thank you!
Click to expand...
Click to collapse
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
CanEpia said:
My guess is your dialplan needs to be modified. I think the ones that come in the packages default to area code 425 or something. I modified mine to just dial whatever I punch in with no modifications and then things started working.
Click to expand...
Click to collapse
Thank you... Yes the problem was with dialplan. I solved now...
But i have another problems:
1) When I call a number via sip the dialer windows show last call and current call over eachother insted of current call.
2) I'd installed destr0_VOIP_WM61___SIP_Config_1.1.CAB on my Leo... Is working without the need of audioroute but I saw that this cab is for WM 6.1 and Leo has WM 6.5 Rom. I need VoIP_HD.cab?
3) Is there a way to make manila show also SIP operator instead of GSM when Internet Calling is available?
4) How can we change comm manager to change one registry value when button is turned off?
Hi did you managed to get the audio out the front speaker and not the back speaker
Or is this problem still the same
Service shows selected but no dialing
I have the same problem as fiftyz. What did you change in dialplan to correct? Could you share your dialplan?
VOIP ENERGY Leo ROM
Dear all I have searched en searched but didn't find a answer anywhere.
The problem is next:
I want to use VOIP on my TP2.
In the ENERGY Leo ROM VOIP is integrated.
I only download a SIPconfig tool to make it work.
But I don't get the speaker and the mic. to work properly.
Calling as a fact is working but then the people can’t hear my.
And I hear than only over the back speaker.
Does somebody know how to solve this problem??
sip voip solved
http://forum.xda-developers.com/showthread.php?t=596682
tested and working
works great
http://forum.xda-developers.com/showthread.php?t=596682