Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Are your contacts on your SIM or in your devices phone book?
Works fine here by the way.
I have the same problem
Stu
They are on the phone not the sim. This is Windows Mobile 2005 not 2003
Mikee4fun said:
Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Click to expand...
Click to collapse
right, the contact summery comes up but it's empty - the content of the notice field you can see - and you can say "yes" and voice command is calling your contact.
MS Voice Command 1.5 is not supported for WM5
regards,
Udo
--
MDApro
It is a bit sketchy
I can launch programs great, i can call people fine. change brightness.volume and I get announcements such as battery is running out
the only things that don't work is showing contacts and hearing the spoken callerid.
It is going to come down to waiting for an update
I thought mine was working fine too with WM5 but after several days of resets and minor other problems, I finally cleared the device and didn't reinstall VC and now it runs a lot better. so bottom line... VC 1.5 causes problems on the universal... although it seems to work ok.
Uninstall MSVC
Anybody know how I can uninstall it, and get it out of my settings control panel. I used the .cab installation.
I had to use the Erase memory icon in Programs... it clears the entire unit and sets back to factory defaults.
Please anybody try VITO Voice2Go on JasJar. It's a new voice control application for Pocket PC. Supports all languages.
I personally use this program on my i-mate Jam, and it works fine. Want to khow how does it works with Universal.
Product site: http://vitotechnology.com/en/products/voice2go.html
MSVC and Contacts
Has anybody overcome this problem? I just revisited this, and it does appear to work for everything, including dialing the contacts.... but.... I cannot get it to show a given contact. It will open the contacts list, even repeat back the phone numbers its dialling, but will not show the contacts individual details, at all.
Any feedback? Perhaps delete all contacts, and resynchronise them all?
Regards
Simon
It must be just the Jasjar as I had WM2005 on the XDA II and never had a problem.
I couldn't even get the US Version to work, I eventually got the UK version on and working but I have the empty screen issue in contacts.
Voice Command works fine for me. The contact is blank, but the program itself works fine
Well I guess it's better than nothing! I was always under the impression that Voice Command was actually integrated into WM5; seems not.
Hopefully 1.6 will address these issues...
Voice command work well with the 1.51
I have cyberon speed dial installed by default on XDA Exec, it works fine
Am I right in saying that "cyberon" is not the same as VC, you have to record something for every contact you want to use it with.
When you have alot of contacts, even the thought of doing this is stupid, maybe if it was just your family including Grandma that would be fine but when your running a business and your ringing different people all day.........
Maybe I am wrong, i have never used it......
sayreul said:
Voice command work well with the 1.51
Click to expand...
Click to collapse
so your saying there is a voice command 1.51. i can only find 1.5
link?
I feel the same way, I did a Google search and nothing, what is 1.51, are you trying to manipulate us into thinking there is a fix to our problems bought on by micro$oft.
Please let us know....... :shock:
Oddly it worked perfectly on my dodgy beta WM5 on my BlueAngel :S
Related
Hi
I've installed Microsoft Voice Command 1.5 UK on my JasJar, but when I ask 'show Jim Smith' it does not show the contact screen properly. I just get a blank white screen.
Is there a fix for this or have I just done something stupid?
Thanks
Steve
MS Voice Command issues
I have the same issue. Any resolutions out there. Also would like to get MS Voice Command to work by pressing call button on Motorla HS810.
Help is greatly appreciated.
Just got my JJ yesterday, me likey.
well as you guys discovered mc voice command doesnt work on wm5 and with good reason... the voice application on jasjar (the default one) works perfectly and can be activated by BT headset (mine atleast motorlla hs820)
I have a new I-Mate K-Jam, and I'm having problems dialing from contacts.
I'm interested to see if anyone can confirm the same results, following these steps:
1. Soft reset.
2. Access contacts (Start -> Contacts or the Contacts hardware button).
3. Find a contact to dial.
4. Press the green phone button to open up the phone application with the contact number shown, ready for dialing.
On my device, the first attempt of the above briefly launches the phone app with the number inserted, and then within a second switches back to the contacts app.
Further pressing the green phone button does nothing.
Works fine for me. Double clicking the green button on a contact starts calling.
-Abbas
Hmm...I've even hard reset mine to see if that would fix it, no luck. Maybe I have a bad unit?
I have the same problem. Also after it comes back to the contacts my phone signal goes from bars to "!" for a bit.
miz said:
I have the same problem. Also after it comes back to the contacts my phone signal goes from bars to "!" for a bit.
Click to expand...
Click to collapse
Mine does the same thing, like the phone resets or something. It's good to hear it's not just me.
Here's some more info. I performed a hard reset, and immediately afterwards, dialing from contacts, (A SIM-based contact, since I hadn't yet synchronized), worked.
As soon as I synchronized with a PC, it stopped working, with about 130 contacts synchronized from Outlook. Even SIM based contacts at that point cannot be dialed.
That's interesting...... hmmmm... well I don't want to do a hard reset yet since I have been tweaking my phone quite a bit. But If I have to then this will be the first thing I will try.
I wonder if has something to do with activesync. What version of activesync do u use?
I'm wondering the same thing. I'm using ActiveSync 4.1.0 Build 4807.
Also, in case I-Mate visits this thread as I've asked them, my ROM versions:
ROM: 1.1.9.3
EXT ROM: 1.1.9.104
More info:
I performed a hard reset, verified that I could dial a SIM contact, then entered a new contact on the device, without using activesync at all.
The problem re-appeared as soon as I added a contact and tried to dial that contact.
Okay, I may have figured this out. The contact I entered on the phone had a number formatted like this:
(123) 456-7890
I performed a soft reset, edited the contact and made the number 1234567890, and I could dial it properly.
Apparently the phone app can't handle a number formatted (123) 456-7890.
A real bonehead bug, if you ask me.
i am running the same version of activesync.
U know a thread concerning this was started at Howard forums
http://www.howardforums.com/showthread.php?t=745295
by the way I also saw your post on the main K-JAM thread there.... I don't think it is third party apps on the ppc. I think it is activesync.
Thanks for the thread link, I just posted there as well, hadn't seen that discussion previously.
If you notice my last post, I think I figure out what the problem is. I posted my findings in that hofo thread as well.
oops did not see those last 2 posts... u r way too fast for me.....
by the way stupid questionw do I make the number stick to 1234567890 format. It automatically shifts to (123) 456-7890
When entering contacts on my K-Jam, the number doesn't get reformatted, but in Outlook it may, which would make it a pain to adjust. However, it's been awhile since I've entered a contact in Outlook, so I don't know.
But, after reviewing that thread at hofo, I think the problem is the combination of that phone number format PLUS smart dialing. If you disable smart dialing, the problem appears to go away even if you have the (123) 456-7890 formatting.
To disable smart dialing, open the phone app, make sure the phone keypad is displayed, press the menu button, access "Smart Dialing Options", and uncheck the enable smart dialing checkbox.
To remove the smart dialing software completely, which I'm contemplating, you can delete the cab file from the extended rom and hard reset. Use total commander from http://www.ghisler.com/pocketpc.htm to manually browse to \Extended_Rom on your device, and you can remove files. (Make a backup copy of everything in that directory first).
Total Commander !!
Hi Guys,
I'm afraid of installing Total Commander 2.0 on my i-mate K-Jam, 'coz it doesn't support OMAP processor (i mean the total commander 2.0), did anyone of you install Total Commander on K-JAM ?? if yes, plzz tell me how it works and the result ??
Thank you in advance.
Re: Total Commander !!
unpresedented said:
Hi Guys,
I'm afraid of installing Total Commander 2.0 on my i-mate K-Jam, 'coz it doesn't support OMAP processor (i mean the total commander 2.0), did anyone of you install Total Commander on K-JAM ?? if yes, plzz tell me how it works and the result ??
Thank you in advance.
Click to expand...
Click to collapse
I have it installed on my qtek9100, works great!
Total Commander .. OMAP !!?
I dunno what kind of processor that is on QTek, again guys, did anyone of you tried to install TC 2.0 on OMAP (K-JAM) .. plzz reply ASAP !!
Thanx
The processor for the wizard devices is the omap and it is an ARM variant. I have TC installed on mine (In fact it was installed on mine within 30 minutes of it arriving at my door (Ok, I ambushed the poor FedEx lady before she could get anywhere near my door )) and have experienced no issues with it running on the device.
Robert Harrold
Houston, TX
TC
Thank you to assure me pal
Whenever I use MS Voice Command, it'll recognize my dial command and take me to the contact, but then it craps out. I'm using the phrase 'call John Smith'. This is only for contact with a single location phone number.
However, whenever I try to dial a contact with multiple locations (Home, Mobile, etc.) it works after prompting for the location.
Has anyone else seen this?
I just did a hard reset and only installed MS Voice Commander. This still happens. So it's not a conflicting program.
WTF? Am I the only one here?
Alright...
First, I have 8125, not MDA.
Now that that is outta the way.
In your voice command settings (Start > Setting > Personal TAB > Voice Command)
Under the "Phone" settings, what is checked?
If "confirm when calling by name" is checked then you need to say YES when it says "call John Smith?" If you don't hear it saying that then maybe its on silent. I also had an issue with the stock 8125 ROM (because it was soooo slow) That it asked me "Call John Smith?" but took a second or two to open the contact info on screen, and it wouldn't accept the answer I gave it till the contact was open. So I had to wait a second or two after it asked before I could answer it.
Just somethings you can check out. GL getting it solved, and if it NEW then maybe exchange it, just in case you have a faulty mic (doubt it) or something.
Later; Lew
I always have a hard time getting VC to work. Just uninstall and reinstall until it works... That's about it. Sometimes it takes me 2 or 3 times.
is this good program?
I saw a blurb on voice command....is this one of those must have programs for my 8125? Will it work through the bluetooth headset? What doesn't it do that will keep me from wanting to install it?
Re: is this good program?
boomer719 said:
I saw a blurb on voice command....is this one of those must have programs for my 8125? Will it work through the bluetooth headset? What doesn't it do that will keep me from wanting to install it?
Click to expand...
Click to collapse
MUST HAVE! Yes, it will work through headset. Just need to do a little tweak (at least on the TMo MDA) so that the headset button activates VoiceCommand.
The only downside is that you will look like an idiot walking around talking to yourself. "Call Bob Brown. Mobile phone. Yes, go ahead and dial the number, please." "What time is it?" etc.
Is there a trial version out?
Is there any application that can spell the caller name and also read sms messages? I know a friend of mine has it, but I don't know if this is a program installed in its phone (don't know what phone it is) or just originally nstalled inside. Thank-you
probably Nokia N Series
poldo66 said:
Is there any application that can spell the caller name and also read sms messages? I know a friend of mine has it, but I don't know if this is a program installed in its phone (don't know what phone it is) or just originally installed inside. Thank-you
Click to expand...
Click to collapse
Microsoft Voice Command 1.6 announces incoming calls as well as email, calendar reminders, etc.
Hi
I install MS Voice Command 1.6, But I not success to operate it. Is there a problem of forigned accent, in MSVC ? I can't use my contact names
Thanks
A friend of mine bought MS Voice Command and he didnt get it working right.
It didnt announces any calls and when a message comes in it only reads the first few numbers and when he opens the message it reads on (e.g. something like "new message from 0664", and when he opens the message it goes on "123456 blabla").
And he didnt managed to choose a button for the voice commands. Maybe a problem with TF3D.
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Voice cammand is great, Tellme not so much
Voice command, as you may have already learned, works great with no training. You can voice dial, control media playback, hear your next appointment, and have callers annouced through your BT. Absolutely essential for me while driving. It will not allow you to dictate texts however. Thats really the piece that I was hoping Tellme would fill in, but it just doesn't seem to work as advertised on their website. To be fair, I've never seen it used on a device that came with it installed. It might work like a champ on those handsets, but it's never worked at all for me.
EDIT: I see you can't edit the title of your post. . .
Voicecommand not announcing bluetooth?
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Voice Command
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
That's it.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Not sure. Making a folder with shortcuts to the setting might work, but personally I wouldn't think about moving that stuff from where it lives.
polera257 said:
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Click to expand...
Click to collapse
No set up needed other than ticking the option in the settings menu.
wlm said:
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
Click to expand...
Click to collapse
It is a download. Do a search and you will find plenty.
I can make the VC work on the phone just fine, but I have an ANT in the car, for BT.
When I try to talk with no car noise, or with car noise, the phone goes stupid, does nothing, well, beeps some kind of talk back, like dumb ass I did not understand you
Tried everything to get bluetooth voice announce
Crissg, I have checked the box to announce calls actually spent two days with Tmobile tech trying to get Voicecommand to announce over bluetooth but no luck. That is why I was wondering if you have this working on your phone. If so did you do any registry changes. I tried everything
Hi CRISSG,
Thanks - tried to locate it, but it's not there. Must be a download. Is the one you are using a WM app? IF so, where did you find it? There seem to be many apps - some with real problems, and I don't want to go that route!! HTC HD2, on Vodafone.. THANKS!!!!!!!
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
It came preinstalled
bigfry said:
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
Click to expand...
Click to collapse
Looks like the files are in the Windows directory of the device. I'm not educated enough to pull it out in a usable fashion. Have you checked the ROM threads? Possibly one of the chefs has already cabbed it up?
I just realized that I'm almost always the one doing the calling from the car, and I hadn't actually recieved a call on the new HD2 (while driving) to verify the annoucement function yet. I just tested it, and it is ringing in the s9 headset, but annoucement comes over the speaker. Interesting. Commands for calls and media and calendar are working fine. As soon as I can get my wife off her phone, I'll get her to text me while I've got the headset on to test that as well.
Edit: It plays the assigned sound for recieving a text over the headset, but is not announcing the message like it did on my Tilt. Sorry if I gave the impression that it was. Like I said, I use it every day, but I make way more calls than I recieve when I'm in the car. Now I'm with you guys wondering why we've lost funtions that we had before.
Edit #2 Was just in the car, and got a text. It was announced through my Jabra earpiece. So it might have something to do with the BT profile being used, as annoucements didn't work with the s9 that I use around the house.
No option of Voice Command in my T8585
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Regretfully in my HD2 , T8585, ROM: 1.48.405.2(71294), Manila:2.5.19211619.0
- there is no such option at all in the
above mentioned path: start, settings, menu, all settings, personal, voice command.
another HD2 n00b
I have been trying for a few days no to get voice set up. I too am UK with vodafone. No voice buit in. I have bought retail MS voice command 1.6 and it fails to install. Cyberon voice speed dial installs. The next problem I have is that, I want to be able to trigger voice calls vial my bluetooth headset. (plantronics 370 explorer) Neither this or my old Jawbone bt headset will trigger voice calls.
I really want to get the MS voice command to work as it looks great and ou don't need to train it. Any help really appreciated..
For all the uk users just do a Google search for microsoft msvc 1.6.21725
I am using this on my HD2 with no problems.
Announcements of callers doesn't work though.
Thats great thanks for this. Appeared to install fine. Not sure if it insatlled right though. I can find it in setting>other>voice command. Looks only to be settings in here. I can't get it to run or prompt for voice.
try pressing and holding the green send key
Thanks for this. I have a green "Talk" button when in phone. Pressing this or long press just call the last number.
The button on my Jawbone activate the voice, which is cool, but the button on the plantronics explorer still does nothing. I guess it is something incompatible with this. Typical eh as this is my favourite headset for out walking. It is great on a windy day.
xtacybyme said:
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Click to expand...
Click to collapse
What Voice Command Software came with the HD2? Which version of the phone are you referring to?