Related
Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Are your contacts on your SIM or in your devices phone book?
Works fine here by the way.
I have the same problem
Stu
They are on the phone not the sim. This is Windows Mobile 2005 not 2003
Mikee4fun said:
Can anyone tell me of a way to get MS voice command v1.5 to work on the JasJar. I can install it but it does not work right. You can play the media player, however if you try to say call "whoever" the contacts comes up and its blank. If anyone has seen this issue please let me know.
Thanks,
Mike
Click to expand...
Click to collapse
right, the contact summery comes up but it's empty - the content of the notice field you can see - and you can say "yes" and voice command is calling your contact.
MS Voice Command 1.5 is not supported for WM5
regards,
Udo
--
MDApro
It is a bit sketchy
I can launch programs great, i can call people fine. change brightness.volume and I get announcements such as battery is running out
the only things that don't work is showing contacts and hearing the spoken callerid.
It is going to come down to waiting for an update
I thought mine was working fine too with WM5 but after several days of resets and minor other problems, I finally cleared the device and didn't reinstall VC and now it runs a lot better. so bottom line... VC 1.5 causes problems on the universal... although it seems to work ok.
Uninstall MSVC
Anybody know how I can uninstall it, and get it out of my settings control panel. I used the .cab installation.
I had to use the Erase memory icon in Programs... it clears the entire unit and sets back to factory defaults.
Please anybody try VITO Voice2Go on JasJar. It's a new voice control application for Pocket PC. Supports all languages.
I personally use this program on my i-mate Jam, and it works fine. Want to khow how does it works with Universal.
Product site: http://vitotechnology.com/en/products/voice2go.html
MSVC and Contacts
Has anybody overcome this problem? I just revisited this, and it does appear to work for everything, including dialing the contacts.... but.... I cannot get it to show a given contact. It will open the contacts list, even repeat back the phone numbers its dialling, but will not show the contacts individual details, at all.
Any feedback? Perhaps delete all contacts, and resynchronise them all?
Regards
Simon
It must be just the Jasjar as I had WM2005 on the XDA II and never had a problem.
I couldn't even get the US Version to work, I eventually got the UK version on and working but I have the empty screen issue in contacts.
Voice Command works fine for me. The contact is blank, but the program itself works fine
Well I guess it's better than nothing! I was always under the impression that Voice Command was actually integrated into WM5; seems not.
Hopefully 1.6 will address these issues...
Voice command work well with the 1.51
I have cyberon speed dial installed by default on XDA Exec, it works fine
Am I right in saying that "cyberon" is not the same as VC, you have to record something for every contact you want to use it with.
When you have alot of contacts, even the thought of doing this is stupid, maybe if it was just your family including Grandma that would be fine but when your running a business and your ringing different people all day.........
Maybe I am wrong, i have never used it......
sayreul said:
Voice command work well with the 1.51
Click to expand...
Click to collapse
so your saying there is a voice command 1.51. i can only find 1.5
link?
I feel the same way, I did a Google search and nothing, what is 1.51, are you trying to manipulate us into thinking there is a fix to our problems bought on by micro$oft.
Please let us know....... :shock:
Oddly it worked perfectly on my dodgy beta WM5 on my BlueAngel :S
Found this link from a post in Wizard section yesterday:
http://www.jetwaremobile.com/index.htm
As the doc says this extension has a SIM access profile, I tried this BT extension on my Universal and a Bluetooth Headset SE HBH-662 that has a Caller ID screen. With this BT extension, now the BT headset can show the Caller ID Name IF the contact name and number exists in the SIM card.
However, it will not show any caller name if the contact only exists in Outlook Contacts.
My test also shows, the number stored in the SIM card has to be exactly the same with one sent over by the operator, otherwise it will not show the caller name. Ex. if the operator sends over the caller number as 171xxxxxx and the number stored in the SIM is 71xxxxxxxx then it will not work. Same thing if the number stored in the SIM is +171xxxxxxx and the operator sends the number 1713xxxxxx then it wil not work as well.
I kind of like to use the format +171xxxxxxxx as this is the international format.
Anyway, this is great, as most people have been waiting for this function to work out of their caller ID BT headset. Now, if we can find out how to make it work to access the Outlook Contact, then its perfect...
Can you report back on your experiences with this? I'm reluctant to install it unless it's proved to work and be reliable with my Jabra BT800.
Mach
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
I believe in Jwright's Modified ROM there is an application called "SIM Access" that allows this. I was not able to try it because I don't have a headset with caller name capability. I forgot to copy the "BT SIM Access" application, but already tried it on the latest QTEK ROM a month ago and the application worked fine.
Thanks cktlcmd
Now i search for "Sim Access" in the forum
I keep you update :wink:
Diggia said:
Hi guys !
I'm just trying it in my 9000 with Jabra BT 800
In the site linked by lie_ui I read:
Configuration
The JETware Hands-free Extension allows control of the phonebook and messaging information that is provided to Hands-free devices. To configure these options run the Hands-free Config application which is installed in the Bluetooth Options folder in your start menu.
I don't find any new icon or service and i can't see the caller number
Have you tried this application ?
:wink:
Click to expand...
Click to collapse
If you go to Start Menu\programs you'll find the Bluetooth options folder. By the way, don't forget to soft reset first.
I've tried with Parrot CK3100 and now I have the battery and network signal strenght status as well as network name. I'm expecting someone to try with BT800 and to report it.
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Yes, same happens to me.
I have the HBH-662, after installing the software the button on my headset does nothing when pushed, unless it is pushed for answering a call, although the name gets displayed when getting a call, provided that the name is on the SIM card.
The other bad thing about it is, if the name is NOT in the sim, it does not display the number, it displays "Unknown" on the headset!
Good step in the right direction though, now it only needs a few tweaks!
Cheers
JP
on my bt800 don´t show the name of the caller
Same here on my BT800 no name just number
hi,
i've tried out the software but i can't activate voice dial now. how can do?
bball4life said:
i've tried out the software i must say i'm impressed that it actually displaying caller's name. however my main problem now is my i cant activate voice dial now. before the software if i was to push the button the headset voice dialin would kick in. but after installin it, caller id works but the voice dialings malfunction. is anyone else having this problem as well?
Click to expand...
Click to collapse
Try checking your "Notifiaction Que". There should only be one sddaemon file. If there is a duplicate then delete it. I use MemMaid for this.
please give me a hand to resolve this problem with vocal dialing.
marcowind80 said:
please give me a hand to resolve this problem with vocal dialing.
Click to expand...
Click to collapse
As I mentioned above, the last time I had a problem with voice dialing was when a duplicated "Notification Que": sddaemon file to be exact, was present. Just delete the duplicated sddaemon file, soft reset, and pair your BT headset again. I used MemMaid's Notification Que to clear duplicated files. I hope this is clear enough.
ok i'll test your suggest....thank you.
excuse me for bad english, i don't speak well this language!
i'm italian
nothing..
not vocal dialing
BT extention
I have another problem in addition to the voice dial problem...... whenever I receive a call from soneone who is using a service provider other than my service provider the device hangs and I have to soft rest the device provided that all the contacts are stored in my SIM card.
Great achievement indeed!!! A first step into a long waited direction
However decided to uninstall it from my Universal, waiting for a new release.
In fact some improvements are required to make it really useful.
I've tried it with my Jabra BT800.
A few issues that I've noticed,
Name displayed, only if:
[list:cca8e10c8e]
Contact present into SIM card.
Outlook phonebook not being used (at least with BT800) despite announced as a feature.
In order for the correspondent name to be displayed, number must be stored into Contacts, exactly as sent by the Operator.
- Some operators do not send the '+CountryCode'.
- This may originate different behaviours for instance depending if user is at Roaming or not.
- Some sort of algorithm would be welcomed to add some "intelligence" here.
[*]If received phone number is not present into SIM card, or not exactly with the same format, 'Unknown' is displayed even in the event of a number being sent... :shock:
The number received should be displayed at these circumstances.
[*]Whenever a Contact name gets displayed, only its first 8 characters are shown.
Much better if complete name contained at Contact, would scroll continuously. :idea:
[*]Voice Speed Dial not working, if JETware Mobile Software is installed.
This is a must, to be solved![/list:cca8e10c8e]
Eagerly waiting for a next release
I agree with the summary listed above. As I listed already in the very beginning of this posting what I found. Yes, its also true that Voice Dialing is not longer working once this app is installed. I did not have Voice Dialing enabled indeed, I tweak the registry so that on the push of the button on the BT headset, it will turn on the BT headset to accept any sound from the PDA instead (I use this for VoIP application).
And now this is not longer working, so similar synthom with the Voice Dialing app.
Once last thing, I cannot uninstall this app.
So for those that have not tried it yet but insterested to try, I would recommend not to try it, just read what we have found so far here, and do not need to repeat the same experience.
Hopefully those guys who write this app read this posting as well and will make the fix.
Not to rain on anyone's parade, but my JAM with its lowly Windows 2003 Mobile SE has been showing the contact name if it exists on the SIM without any modifications on my SE HBH-662.
I made this observation about a year ago on HoFo and six or so months ago right here on XDA-Dev.
This is interesting to say the least.
I wonder if there is an application that would pick up my phone after some rings, and plays a message and people can drop a message.
So I will have a voicemailbox with recorded messages which I can point and click at, save them, listen again, etc. Just recorded als .mp3 on internal storage. Maybe even callback options, sms-back options etc.
I really hate dialling that voicemailbox number, choosing 1 and 2 to listen messages. I have no overvieuw of messages etc.
The app looks fairly simple to me. Does it exist already?
You're searching for some kind of on-device visual voice mail
I would really like to see this at this moment my voicemail is nothing more than a question to mail me or sms me but most people do not like that
one question when your phone is off or you are out of range what would you like another app to take it over?
This is a nice idea...
See it more as a secretary app. instead of a voicemail app.
Where you're in your car and you don't / can't talk.
Perhaps something with different messages you can choose from (you need to make them yourself?)
Something like "Hello this is <insert name>, I'm driving at the moment, please leave a message after the beep" *beep* The person leaves a message that will be saved as mp3 file for example.
@WvanWaas
When out of range, your 'standard' voicemail will take over.
But when in meetings, or as said, driving, it would be nice that the persons message can be stored on my device.
The ultimate thing would be that this program can dial my voicemail, automaticcally send DTMF tones (time and pattern), and store eventually new voicemailmessages locally. The number of new voicemails on my network is available (since manila uses it too).
With Telfort home-phone, I get emails with .mp3s of voicemail messages (VOIP). Thats really good.
With vodafone UK I was using vodafone mail - voicemails automatically appeared as emails with WAV attachments.
Was very handy
There dont exist any programs?
the only app is isecretary. it doesnt work on diamond though
I use www.youmail.com and also wrote a simple client to parse through my emails and just list my voicemails in a UI.
Youmail also does speech to text transcription so you don't even have to play the sound file-- just read it.
It not for outside US I guess...
It looks promising...
It exists for Nokia phones
I have not found an application as such for the diamond but I know that it exists for Nokia. With the Nokia N95 there is a built in application that works as a voicemail. Of course only when there is coverage and the phone is working.
The application picks up the call after some time (configurable) and plays a greeting message that you have previously recorded and after the beep, the caller can record his message. The application saves that recording and whenever you are available you can playback that message.
Hope to find one for Diamond.
Yup, my T-Mobile voicemail charges are silly, plus I'd like to have more control and functionality from my voicemail. An included blacklist filter would be handy too.
I have a Touch Pro (Raphael).. Is there really nothing around at the moment that will work? That's kind of strange.
Just kick this one up once more ...
This type of app could cause some expensive long distance charges if you were outside of your local calling area though, no? I'm thinking your phone would need to be connected to the call in order to record an .mp3 voice message locally on the device, whereas carrier voicemail can be received regardless of where you are anywhere in the world without costing you as the user a fee to receive a message.
I see that Touch HD can record calls.
http://forum.xda-developers.com/showthread.php?t=457808&page=4
A simple application which auto-answers, plays a file, records a message and nicely puts them in a list, so I have total controll of my voicemessages?
That would be well killer-app... I'd pay for it, simply because I need it.
i realy want this app too!!!!!
Sounds nice to me as well
+1 here....
Try This. Loaded on my Diamond but havn't tested it.
65coupei6 said:
Try This. Loaded on my Diamond but havn't tested it.
Click to expand...
Click to collapse
thanks, i installed it, and recorded an message for people calling me, but cant get the program pick up my call... i allready said he must pick the call after 3 sec. and also after 0 seconds, he dont pick up any call... i added the number with wich i'm trying, at an group, and i see the missed call in isecretary also, but he dont pick up... any body know how this works? the site op the maker is down
Why I Secretary can’t mute the microphone of my xperia x1 and why the caller can’t hear my answer message
How can I fix this using registry or any tweak tool for windows mobile 6.1
thanks
that's what every diamons-user needs!
http://www.youtube.com/watch?v=jqnhm8yfTqM
On my Nokia N95 it would say the name of the person calling me. Can you do this on the X1 ?
do you mean like displaying the name of the person, even if their not saved in your contact list? like how the caller id does on a home phone?
Bennieficial said:
do you mean like displaying the name of the person, even if their not saved in your contact list? like how the caller id does on a home phone?
Click to expand...
Click to collapse
No, the phone would speak out the name of the person calling. So if Joe Blogs called my on my N95 I would hear 'ring, ring, Joe Blogs, ring ring, Joe Blogs...........'
well...back on my blackjack II, i remember when i upgraded from wm 6.0 to 6.1, there was a new program up there called "Voice Command" that allowed you to do this. So I'm guessing it'd still work on the X1 since its an official microsoft program. So just try googling "Windows Voice Command"
Yes, get "Microsoft Voice Commad" and check the settings. By default it should be set to bluetooth only, but you can change it so it reads the name even without the bluetooth. I like it a lot with bluetooth, cause you can set it to also read your text to you
Yeah, but I can't find an answer if the BT on the X1a and MSVC has the same issue as on the Touch Pro, where if you have it say the name of the incoming caller, it won't. You get a corruption sound. Normally that a bell sound. So normally you get "<your ringtone> and in the background of the ringtone, you hear "you got a call from 888-8888"" Or instead of the phone#, you hear the name if its in your address book.
When its broken, you hear your ringtone and in the background a small beep"
here is the link: http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/about-voice-command.mspx
give it a try and let us know.
even i like that feature on nokia phones
My Voice Command doesn't work properly on incoming calls either. It doesn't say the name of the caller, or even the telephone number. I have seen it work perfectly on an Omnia. Odd that it doesn't work on the X1!
Bennieficial said:
do you mean like displaying the name of the person, even if their not saved in your contact list? like how the caller id does on a home phone?
Click to expand...
Click to collapse
i am in fact looking for this?
my previous phone use to display name of the callers, even if they werent stored in my contacts
how can i get this to work on my x1?
much apperciated
You need MS Voice Command or something similar for X1 to talk.
The current version of MS Voice Command combined with the current WM6.1 build does not announce Caller ID even though the feature is there. Reasons...I don't know. All of the other voice funtionality works great though, including reading of SMS and MMS messages among other things.
caller anouncement doesnt work on the x1 and i dont think anyones has come up with a solution to it yet.
Same
It attenuates my rintone every so often as if it's going to say the name but it never does.
Certain versions of WM don't support caller announcement. I think it is explained on the MS website for Voice Command.
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Voice cammand is great, Tellme not so much
Voice command, as you may have already learned, works great with no training. You can voice dial, control media playback, hear your next appointment, and have callers annouced through your BT. Absolutely essential for me while driving. It will not allow you to dictate texts however. Thats really the piece that I was hoping Tellme would fill in, but it just doesn't seem to work as advertised on their website. To be fair, I've never seen it used on a device that came with it installed. It might work like a champ on those handsets, but it's never worked at all for me.
EDIT: I see you can't edit the title of your post. . .
Voicecommand not announcing bluetooth?
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Voice Command
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
That's it.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Not sure. Making a folder with shortcuts to the setting might work, but personally I wouldn't think about moving that stuff from where it lives.
polera257 said:
Crissg. In your reply you mention Microsoft Voicecommand announcing callers in bluetooth headset. Have you gotten that feature to work? I tried to get it to announce calls through bluetooth for two days with no success. Does yours work. If so how did you set it up.
Click to expand...
Click to collapse
No set up needed other than ticking the option in the settings menu.
wlm said:
Hi! As a "newby", I can't find any voice command on my HD2. Is it buried somewhere or was it a download. I'm in GB with Vodafone. LOVE MY HD2!!
Thanks!!!
Click to expand...
Click to collapse
It is a download. Do a search and you will find plenty.
I can make the VC work on the phone just fine, but I have an ANT in the car, for BT.
When I try to talk with no car noise, or with car noise, the phone goes stupid, does nothing, well, beeps some kind of talk back, like dumb ass I did not understand you
Tried everything to get bluetooth voice announce
Crissg, I have checked the box to announce calls actually spent two days with Tmobile tech trying to get Voicecommand to announce over bluetooth but no luck. That is why I was wondering if you have this working on your phone. If so did you do any registry changes. I tried everything
Hi CRISSG,
Thanks - tried to locate it, but it's not there. Must be a download. Is the one you are using a WM app? IF so, where did you find it? There seem to be many apps - some with real problems, and I don't want to go that route!! HTC HD2, on Vodafone.. THANKS!!!!!!!
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
It came preinstalled
bigfry said:
It is there in the T-Mobile US ROM, my understanding is that not all ROMs include it by default.
Click to expand...
Click to collapse
Looks like the files are in the Windows directory of the device. I'm not educated enough to pull it out in a usable fashion. Have you checked the ROM threads? Possibly one of the chefs has already cabbed it up?
I just realized that I'm almost always the one doing the calling from the car, and I hadn't actually recieved a call on the new HD2 (while driving) to verify the annoucement function yet. I just tested it, and it is ringing in the s9 headset, but annoucement comes over the speaker. Interesting. Commands for calls and media and calendar are working fine. As soon as I can get my wife off her phone, I'll get her to text me while I've got the headset on to test that as well.
Edit: It plays the assigned sound for recieving a text over the headset, but is not announcing the message like it did on my Tilt. Sorry if I gave the impression that it was. Like I said, I use it every day, but I make way more calls than I recieve when I'm in the car. Now I'm with you guys wondering why we've lost funtions that we had before.
Edit #2 Was just in the car, and got a text. It was announced through my Jabra earpiece. So it might have something to do with the BT profile being used, as annoucements didn't work with the s9 that I use around the house.
No option of Voice Command in my T8585
xtacybyme said:
wlm... start, settings, menu, all settings, personal, voice command.
in regards to settings as wlm wrote. is it ok for us to make a folder named control panel, and cut all our settings programs and move them to the control panel folder? anyone do this before?
Click to expand...
Click to collapse
Regretfully in my HD2 , T8585, ROM: 1.48.405.2(71294), Manila:2.5.19211619.0
- there is no such option at all in the
above mentioned path: start, settings, menu, all settings, personal, voice command.
another HD2 n00b
I have been trying for a few days no to get voice set up. I too am UK with vodafone. No voice buit in. I have bought retail MS voice command 1.6 and it fails to install. Cyberon voice speed dial installs. The next problem I have is that, I want to be able to trigger voice calls vial my bluetooth headset. (plantronics 370 explorer) Neither this or my old Jawbone bt headset will trigger voice calls.
I really want to get the MS voice command to work as it looks great and ou don't need to train it. Any help really appreciated..
For all the uk users just do a Google search for microsoft msvc 1.6.21725
I am using this on my HD2 with no problems.
Announcements of callers doesn't work though.
Thats great thanks for this. Appeared to install fine. Not sure if it insatlled right though. I can find it in setting>other>voice command. Looks only to be settings in here. I can't get it to run or prompt for voice.
try pressing and holding the green send key
Thanks for this. I have a green "Talk" button when in phone. Pressing this or long press just call the last number.
The button on my Jawbone activate the voice, which is cool, but the button on the plantronics explorer still does nothing. I guess it is something incompatible with this. Typical eh as this is my favourite headset for out walking. It is great on a windy day.
xtacybyme said:
ive tried the voice command software that came with my hd2. and works really well. i cant get it to compose a text message or email... does the preinstalled voice command allow us to compose a text message by voice? are you guys using tell me? which app is the best app for controlling media, text messages,opening programs, calling contacts, viewing appoinments etc with the hd2?
Thank You
Click to expand...
Click to collapse
What Voice Command Software came with the HD2? Which version of the phone are you referring to?