Please help me with the Android screen AC8227L - SYM501H-V1.2 for Peugeot 407
As I entered the blue screen and stood on the Factory Reset option, but then the color of the line becomes green and the order is not accepted with the required choice ...
I searched the board and found two pins, the first is vol+ and the second is vol_.
The interface buttons do not give any change or order in that..
Can someone help me how to get the required command
Thank you all
Related
Hello,
I need some guidance. I flashed the latest version of malaysk ROM. Unfortunately both recovery and the rom give me a blank screen. I know the screen works because I see the malaysk logo when I attempt to go into recovery.
I am presuming I could use a PC and fastboit mode, but how is this fine on an android head unit.
I have a 1 din, flip screen type, KLD5, RK3188 model.
Please help me.
There seem to be a lot of units flashed with the latest rom that have lost the bootloader and recovery.. I'm not seeing any fixes for this. Has anyone fixed a unit that is now stuck at the bootloader with no recovery possible?
Sent from my SM-G928F using Tapatalk
I did not try it, but this might work:
Holding the power button while turning on the unit will get you into bootloader mode. **This is battery power not acc power** The screen will be black but plugging in a usb to the front usb will prompt the PC to install the RockChip bootloader drivers - this might help http://www.cnx-software.com/2013/11...install-rockchip-usb-drivers-in-windows-xp78/
(From http://forum.xda-developers.com/wiki/Hui_Fei_Type#Bootloader_mode)
I don’t have a power button on my HU, I wonder if the RST button or the smaller reset button above would work?
Sent from my SM-G928F using Tapatalk
Hello there,
I have been a reader of XDA for many years but this is the first time I'm at a loss...
I have this radio: Seicane S088713 but with the T3 processor. Sorry I cannot post links (I'm a newbie!) but you can see it if you search for "9 inch 2004-2008 Chrysler Aspen 300C Android 6.0"
I managed to root it with Kingroot and all seemed fine for a while but I must have deleted something by mistake and now the unit is stack on the android screen.
Any idea how to enter recovery mode? The radio does not have any buttons or reset pin.
Also tried the Alt+PrtSCr+i but all I manage to get is the unit to reboot.
Any ideas? I have looked a fair bit of info on this particular radio but there's no much on it.
Have you find the way to get into recovery mode in the meanwhile?
I have a seicane with allwin T8, would also love to know how to enter recovery mode, if there even is one lol.
Recovery - worked for me
Did you repeatedly hit the "i" while holding the "alt + prnt scrn" buttons?
Even after the first boot screen starts?
It takes a little patience and practice if it will work at all.
If you have a poweroff button, just push it for quite some time and then push again and wait for the head unit to start, it should start right on the recovery menu after that.
I've only tried it once, and it did.
Hope you'll get there too.
i bought new px6 head unit from eunavi and i wants to update but it not recognized all my sd cards so i want try to flash the firmware from the recovery mode but don't know how enter to recovery try press long reset with and without the power button not working for me anyone know what i need to do?
baster72 said:
i bought new px6 head unit from eunavi and i wants to update but it not recognized all my sd cards so i want try to flash the firmware from the recovery mode but don't know how enter to recovery try press long reset with and without the power button not working for me anyone know what i need to do?
Click to expand...
Click to collapse
Select system update in settings or try Malaysk MOD App which forces the device to boot into the recovery, but actually the update should be detected from the android system itself
MajinBoo17 said:
Select system update in settings or try Malaysk MOD App which forces the device to boot into the recovery, but actually the update should be detected from the android system itself
Click to expand...
Click to collapse
hi Guys,
he has an STM32 MCU and there is no mod / boot installer!
they are only for MTCD / E devices.
Kind regards. guenni0501
just connect a keyboard on BACK SIDE USB it is important front side doesnt work connect via backside usb press ctrl+alt+del device will restart than rapidly pres i key while holding alt + printscreen pray god for me
Hello Team ,
Just bought a new head unit '' Sadocom PX6 android 10 but when mounted I got a problem with a panel buttons so I reset the unit from the rest button then it entered to the recovery mode but I can't exit it after I finished the reset , I downloaded deferent firmware and MCU but without success, its stuck in recovery mode with all buttons leds blinking, and all physical buttons not dowing anything.
Any solution please.
Thanks in advance .
Try to see if the strip connecting the main board and physical key board is perfectly attached.
It might have been displaced.
Atleast touch or any physical button must work.
Or the physical button you are mentioning might have stuck or shorted, try to remove and replace it or- just try to detach the strip containing the physical key board( only the strip is for physical keys only).
Hello, I have the Pumpkin AA0505B PX6 4GB /64GB. Android 10, year 2020 06.15. version 06 car radio. The device no longer turns on.
When I turn it on while holding down the power button, the buttons light up for 2 seconds, then the device immediately turns off again.
Pressing reset and /or reset + Power on does the same thing. I would like to reinstall the MCU and firmware on an SD card to see if the boot curtain starts. Can someone tell me (Download Link) which MCU and firmware I need. It doesn't have to be the original one. The main thing is that I can get the device up and running again