Database Users

VertexOS 1.9 [UNOFFICIAL][2017/2/11] [KIPPER] [AOSP+LOS]

HI ALL! With new Rom
VertexOS aims to provide a simple but enhanced near-stock AOSP experience with carefully selected features and an emphasis on stability and smoothness.​
what doesn't work ?
everything is working perfectly.
Coming from another ROM, OR if a CLEAN FLASH is required
1) Download the Vertex... .zip file.
2) Download a 7.1 GApps package.
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash the Vertex... .zip file
6) Flash Nougat-compatible GApps : http://opengapps.org/ / ARM64,7.1,pico
7) Reboot
Download:https://www.androidfilehost.com/?fid=745425885120707303
enjoy!
Credits:
- LineageOS
- AOSPA
- Citrus-CAF
- DU
- PureNexus
- Zephyr-OS
IF YOU LIKE MY WORK PLEASE HIT THANKS .
-IMPORTANT- : To install this rom you must have installed TWRP-3.0.3.0 , download from here https://www.androidfilehost.com/?fid=529152257862697990
To easy install from TWRP recovery :
1- open "install" section.
2- SELECT "install img" in the bottom .
4- Chose the place of TWRP-3.0.3.0.
5- install as RECOVERY , then reboot to recovery.
XDA:DevDB Information
ROM [AOSP + LOS], ROM for the Wileyfox Storm
Contributors
PS-DEV
Source Code: https://github.com/VertexOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP + LOS
Version Information
Status: Stable
Created 2017-02-11
Last Updated 2017-02-20

Received

Received !

Firstly, thanks loads for producing these ROMs it is much appreciated. :good:
I am unfortunately having issues getting both this and your CypherOS rom to work.
After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.
I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.
Any thoughts on what I might be missing when flashing your ROMs?
Again many thanks for the work.

Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.

Cannot inatall gapps (Wrong Architecture)
Hi,
I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"
I use TWRT 3.0.3-0 (kipper)
Any ideas what I made wrong?
best regards, Chuck

Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.

I installed fine with the nano apps and 64 bit, no issues

miSAKe said:
Firstly, thanks loads for producing these ROMs it is much appreciated. :good:
I am unfortunately having issues getting both this and your CypherOS rom to work.
After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.
I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.
Any thoughts on what I might be missing when flashing your ROMs?
Again many thanks for the work.
Click to expand...
Click to collapse
Check the first post . i have been edit.

Chron0s said:
Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.
Click to expand...
Click to collapse
show your PM.

Chron0s said:
Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.
Click to expand...
Click to collapse
NO NO
ARM64 ARMv8 .

ChuckeCheese said:
Hi,
I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"
I use TWRT 3.0.3-0 (kipper)
Any ideas what I made wrong?
best regards, Chuck
Click to expand...
Click to collapse
1- check to wipe this partitions :
- SYSTEM
- CACHE
- Dalvick-cache.
- DATA
and dont forget to factory reset .
2- first install rom then Gapps. download from here http://bit.ly/2kQf3Le

PS-DEV said:
Check the first post . i have been edit.
Click to expand...
Click to collapse
Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get
Code:
FAILED (remote: dtb not found)
I will try building it myself when I get some time.

miSAKe said:
Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get
Code:
FAILED (remote: dtb not found)
I will try building it myself when I get some time.
Click to expand...
Click to collapse
You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?

PS-DEV said:
You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?
Click to expand...
Click to collapse
Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.

miSAKe said:
Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.
Click to expand...
Click to collapse
The phone boot to rom or not ??

PS-DEV said:
The phone boot to rom or not ??
Click to expand...
Click to collapse
Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.
Thanks for your help.

miSAKe said:
Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.
Thanks for your help.
Click to expand...
Click to collapse
Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .

PS-DEV said:
Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .
Click to expand...
Click to collapse
Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.

miSAKe said:
Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.
Click to expand...
Click to collapse
Stock firmware or what? ,, to install version 13 Bootloader , just install any nightly cm13 then back to recovery and install TWRP 3.0.3.0 ??.

*GUIDE* [Honor 8] Kali NetHunter Installation *UNOFFICIAL*

***WARNING***
This is NOT an official guide and I'm not affiliated with Offensive Security [ :crying: ].
This is just my personal guide.
I've been playing with this today and lot of my tries ended up with bricking my device.
Currently this method is working, but I am NOT responsible for any bricked devices.
If you never encountered/heard of bootloop/brick, please consider ignoring this tutorial.
DON'T FORGET TO MAKE A NANDROID BACKUP!!!
Hi guys! This is my quick-guide on how to install a Kali NetHunter on Huawei Honor 8.
It's quite simple, just read every step carefully.
This is just a guide. All credits goes to: CyanogenMod , TWRP, Offensive Security
So let's start!
*REQUIREMENTS*
- Rooted device
- Custom recovery TWRP/CWM
- A bit of patience
- Brain
You will need to flash a new recovery image through your old one .
So it's exactly very easy. I've already tested a lot of things and everything is working just fine.
So follow this steps:
1. Download CM 13 for Honor 8 and put it on your SD card. Link here.
2. Download this TWRP image for CM 13 / Honor 8 and put it on your SD card. Link here.
3. Download OpenGApps (Select arm64, 6.0, mini) and put in on your SD card. Link here.
4. Download Kali NetHunter (generic-arm64) and put in on your SD card. Full version: HERE. Minimal version: HERE. Just select the version you prefer. I'm using FULL, but I also tried minimal and it's working fine.
So after you downloaded all the files and you have it on your SD card:
1. Power off your Honor 8
2. When it's already off, press&hold Power and Volume Up button, until your device vibrates and the display starts up.
3. You should now be in your recovery. Press Install and select the TWRP recovery image, which you have downloaded on you SD card. Slide the panel to flash.
4. After you successfully flashed the image, head into main TWRP menu and select Reboot -> Recovery.
5. After you reboot into your recovery, choose cancel, if device ask for password key. If TWRP asks you if you want to allow write access to the system partition. IT IS VERY IMPORTANT THAT YOU ALLOW THIS. Check the box that says to never ask this question again.
6. Do a basic WIPE
7 . Flash the CM 13 then flash GApps
8. !IMPORTANT! Now reboot to your system and complete the basic "First-start" settings. Do NOT flash Kali NetHunter, if you haven't completed the first-time boot settings.
9. When you set up your phone and you are already on your Home Screen, power off your phone and boot to recovery again.
10. Now flash the Kali NetHunter, which you have downloaded on your SD card.
11. After the installation is complete, you can reboot to your system.
12. Press the power button on the Huawei Unlocked Bootloader warning screen. It will take a bit longer to boot than normal. It's completely fine. Just let it be for like 30 secs.
13. Now the Kali Bootanimation will start. Your phone will probably turn off during the bootanimation on your first boot. DON'T PANIC. It's fine. It will automatically restart and boot to your new system.
14. Now open up the NetHunter app. It will ask you for some permissions. It's important to ALLOW all the permissions.
15. After you allowed it all permissions, you can now close the NetHunter app and enjoy your Kali NetHunter
Sorry for my bad English
If you brick your phone, wipe your data and flash everything except the TWRP image again.
It's not my fault if you damage your phone by doing this. Remember that you are doing this on your own risk.
Have fun with your NetHunter on Honor 8
Screenshots:
http://imgur.com/a/8Wdyf
http://imgur.com/a/95dx0
http://imgur.com/a/YBxRS
http://imgur.com/a/E4gZ0
http://imgur.com/a/mkwet

will it works on stock rom??

Do I need to be on a specific build for this or does it not matter?

VenuGopalu said:
will it works on stock rom??
Click to expand...
Click to collapse
Unfortunately no. It requires some components from CyanogenMod.
FreeLineTM said:
Do I need to be on a specific build for this or does it not matter?
Click to expand...
Click to collapse
You mean specific NetHunter build or CyanogenMod build?
I tried one older build of NetHunter and it worked fine as well, but I'm not sure about the CyanogenMod. I think there are only 4 builds of CM13 for Honor 8 and this one is the newest. But I think the older builds would work too.

Flexy' said:
Unfortunately no. It requires some components from CyanogenMod.
You mean specific NetHunter build or CyanogenMod build?
I tried one older build of NetHunter and it worked fine as well, but I'm not sure about the CyanogenMod. I think there are only 4 builds of CM13 for Honor 8 and this one is the newest. But I think the older builds would work too.
Click to expand...
Click to collapse
I mean the EMUI stock build. I'm currently on FRD-L09C432B381

FreeLineTM said:
I mean the EMUI stock build. I'm currently on FRD-L09C432B381
Click to expand...
Click to collapse
Unfortunately no I tried it on stock build but without any success. It definitely requires CyanogenMod

it is working on my phone with stock mm rom ,, the boot animation was awesome ,, it was booted my device well and several apps were installed .i will attach a pic in below

Flexy' said:
Unfortunately no I tried it on stock build but without any success. It definitely requires CyanogenMod
Click to expand...
Click to collapse
I mean what build I need to be on to flash Cyanogen?
---------- Post added at 07:13 PM ---------- Previous post was at 06:55 PM ----------
Stuck on your device is booting now after flashing new TWRP and rebooting to recovery, but can still boot to system and flash old TWRP.

VenuGopalu said:
it is working on my phone with stock mm rom ,, the boot animation was awesome ,, it was booted my device well and several apps were installed .i will attach a pic in below
Click to expand...
Click to collapse
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
FreeLineTM said:
I mean what build I need to be on to flash Cyanogen?
---------- Post added at 07:13 PM ---------- Previous post was at 06:55 PM ----------
Stuck on your device is booting now after flashing new TWRP and rebooting to recovery, but can still boot to system and flash old TWRP.
Click to expand...
Click to collapse
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?

Flexy' said:
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Click to expand...
Click to collapse
It's not strange because I was on nougat with latest nougat TWRP when I tried the first time. But I rolled back to mm and completed the steps. However, the data partition was encrypted after rebooting to recovery with the new TWRP. I had to format data then reboot to recovery again. You should add this to the guide.

Flexy' said:
Wow, I couldn't get it working My phone always booted to the EMUI, but none of NetHunter components were installed. Strange.
Oh, I don't know if there is a build number limitation, but you definitely need MM ROM firmware.
Link to the original CM 13 Honor 8 thread.
Hmm.. Strange. What version of TWRP were you using to flash the Honor 8 one?
Click to expand...
Click to collapse
I have tested on twrp-3.0.2-0-frd.img&twrp-3.1.1-0-frd.img both are working without any issue
link for twrp:::: https://dl.twrp.me/frd/

I successfully flashed nethunter on stock Nougat (FRD-L09C432B360).. DriveDroid which is the only thing I want didn't work with stock because it couldn't find USB mass storage. I tried to install it via nethunter instead but it didn't work there either. Might be because I forgot to open nethunter once for setup though..

FreeLineTM said:
I successfully flashed nethunter on stock Nougat (FRD-L09C432B360).. DriveDroid which is the only thing I want didn't work with stock because it couldn't find USB mass storage. I tried to install it via nethunter instead but it didn't work there either. Might be because I forgot to open nethunter once for setup though..
Click to expand...
Click to collapse
Can you tell me how you installed Nethunter on FRD-L09? I am pretty new to this android scene , also you know if the fingerprint sensor works normally?

darkrsing said:
Can you tell me how you installed Nethunter on FRD-L09? I am pretty new to this android scene , also you know if the fingerprint sensor works normally?
Click to expand...
Click to collapse
I don't think fingerprint worked if I recall correctly. I installed NetHunter as any custom ROM if I remember correctly.

I have installed it on Stock rom by using Magisk (and root of course). Very simple, very powerful.

Twrp for Nokia 5 android pie

Can someone give me TWRP for Nokia 5 android pie
And root it

vineet09i said:
Can someone give me TWRP for Nokia 5 android pie
And root it
Click to expand...
Click to collapse
Hi,
Though I have not tested it yet. But there is TWRP Recovery 3.2.3 posted in 4pda.ru, it has only Russian and English languages: https://4pda.ru/forum/index.php?showtopic=839089&st=1720#entry75812306
Guide: https://www.androidweblog.com/root-nokia-5-ta-1053-install-twrp-recovery/
XDA User 'alwaysbest' posted a thread here, which also supports upto Android 8.1 Oreo Stock ROM only: https://forum.xda-developers.com/nokia-5/how-to/root-nokia-5-android-8-1-t3831303

TWRP support Project Treble
vineet09i said:
Can someone give me TWRP for Nokia 5 android pie
And root it
Click to expand...
Click to collapse
Hi I'm a 4pda user. I have TWRP 3.2.3 click here ( download from the site, you need to register )
This recovery is normal flashing on android pie (need open bootloader).
For the root set only Magisk 17.3!!!
TWRP support Project Treble but need compile boot and vendor

Mtipox said:
Hi I'm a 4pda user. I have TWRP 3.2.3 click here
This recovery is normal flashing on android pie (need open bootloader).
For the root set only Magisk 17.3!!!
TWRP support Project Treble but need compile boot and vendor
Click to expand...
Click to collapse
Can you elaborate some more
Currently I am using android pie
As I have read that magisk version 18 is stable for android pie

vineet09i said:
Can you elaborate some more...
Click to expand...
Click to collapse
What exactly to explain? About Project Treble? Search in google what it is..
About magisk we tried 18 but no one wanted flashing. Selection method determined that recovery flashing ok only Magisk v17.3 And it works great for 9
And I forgot to download from the site, you need to register

Mtipox said:
What exactly to explain? About Project Treble? Search in google what it is..
About magisk we tried 18 but no one wanted flashing. Selection method determined that recovery flashing ok only Magisk v17.3 And it works great for 9
And I forgot to download from the site, you need to register
Click to expand...
Click to collapse
As I have understood
1st unlock bootloader
Then flash recovery
Then FASTBOOT reboot (at the same time press vol+ and power button )
Now I am in recovery
Here select magisk version 17.3
Now reboot the the phone
Please correct me if I am wrong on any step

vineet09i said:
Please correct me if I am wrong on any step
Click to expand...
Click to collapse
1. Reboot to fastboot
2. Flash recovery "RECOVERY_NAME.img"
3. Telephone reboot in TWRP
4. Flash Magisk v17.3
5.PROFIT!!!

Magisk 18.1 working on android pie or not

Mtipox said:
Hi I'm a 4pda user. I have TWRP 3.2.3 click here ( download from the site, you need to register )
This recovery is normal flashing on android pie (need open bootloader).
For the root set only Magisk 17.3!!!
TWRP support Project Treble but need compile boot and vendor
Click to expand...
Click to collapse
Can you provide the direct file here(not the link) as I'm not Russian, I'm unable to register or login.

Is twrp-3.6.2_9-0-fajita.img Android 12 support?

I am wondering, would it work or is it upgraded for Android 12

Im confused what you just said, do you mean if the twrp works on android 12? if so twrp doesnt depend on android 12 at all.

andythegreat said:
I am wondering, would it work or is it upgraded for Android 12
Click to expand...
Click to collapse
This will work booting img and also has a12 encryption support now

Brettroth said:
This will work booting img and also has a12 encryption support now
Click to expand...
Click to collapse
Does that mean no need to remove password and lock screen before updatinga to a new LOS 19.1 nightly ?
And if I get it right, it will also decrypt A12 now?
Thanks

yoruuba2 said:
Does that mean no need to remove password and lock screen before updatinga to a new LOS 19.1 nightly ?
And if I get it right, it will also decrypt A12 now?
Thanks
Click to expand...
Click to collapse
I haven't tried but should work. On 6t entering password fails but continue anyways and it decrypts internal.

Up & running on A12 with this TWRP version. It works on my phone with schema and decryption.

kraoc said:
Up & running on A12 with this TWRP version. It works on my phone with schema and decryption.
Click to expand...
Click to collapse
Did you come from LOS recovery? If so, what steps did you use and did you loose data in the process?

syonox said:
Im confused what you just said, do you mean if the twrp works on android 12? if so twrp doesnt depend on android 12 at all.
Click to expand...
Click to collapse
This isn't true, If you use an older TWRP and install android 12 you can get the qualcom crash dump screen error as seen here https://forum.xda-developers.com/t/...os11-open-beta-2-3-and-stable-latest.4316563/
TWRP doesn't really support Android 12 yet, mostly the encryption
TWRP does need to support the android version you have installed for it to work properly

I cleaned install LOS 12L using recommanded steps.
I then flashed TWRP A12 these ways, from Magisk Manager 25.1 :
Flash twrp.zip WITHOUT reboot
Install Magisk (recommanded way)
Reboot

LineageOS installs ok but bootloops instantly

Nokia x6 ta-1099 CN.
This week any and all versions of LineageOS (official 17-19, incl. microG versions) started to bootloop instantly after the flashing. I.e the rom installs fine, recovery menu works, but when the lineageOS logo comes up, it only lasts for abt. 1 seconds before auto-rebooting the phone.
I used to be able to install and run LineageOS in the past no problem using LineageOS official method (adb sideload) as well as TWRP "wipe->flash" method. Also, non-lineageOS roms work fine (HavocOS, PixelPlusUI, ArrowOS, AOSP).
Any reason why it suddenly bootloops? Is there any rookie mistake I'm making here?

are you doing a Clean Wipe before install?
clean wipe - wipe all partitions excluding vendor.

ai.Sanaul said:
are you doing a Clean Wipe before install?
clean wipe - wipe all partitions excluding vendor.
Click to expand...
Click to collapse
Yes, though I was wiping everything including the vendor.

Totesnochill said:
Yes, though I was wiping everything including the vendor.
Click to expand...
Click to collapse
maybe your phone is not compatible with the version, please check...
Edit: and yes this rom is not compatible with your phone. check some unofficial builds for your phone of Linage OS.

ai.Sanaul said:
maybe your phone is not compatible with the version, please check...
Edit: and yes this rom is not compatible with your phone. check some unofficial builds for your phone of Linage OS.
Click to expand...
Click to collapse
LineageOS for MicroG is officially compatible though, and I clearly remember installing an unofficial build in the past

Totesnochill said:
LineageOS for MicroG is officially compatible though, and I clearly remember installing an unofficial build in the past
Click to expand...
Click to collapse
Linage Os is officially not available for Nokia X6 ta-1099, i checked on offficial site...

Totesnochill said:
Nokia x6 ta-1099 CN.
This week any and all versions of LineageOS (official 17-19, incl. microG versions) started to bootloop instantly after the flashing. I.e the rom installs fine, recovery menu works, but when the lineageOS logo comes up, it only lasts for abt. 1 seconds before auto-rebooting the phone.
I used to be able to install and run LineageOS in the past no problem using LineageOS official method (adb sideload) as well as TWRP "wipe->flash" method. Also, non-lineageOS roms work fine (HavocOS, PixelPlusUI, ArrowOS, AOSP).
Any reason why it suddenly bootloops? Is there any rookie mistake I'm making here?
Click to expand...
Click to collapse
Can you please link me the TWRP latest file ? I haven’t found it yet. And also, were you able to install LineageOS on your phone?