Hi guys,
I have updated my blu vivo 5r to Nougat and installed TWRP.
The backup keeps on failing. Has anyone successfully backed up Nougat using TWRP on this phone?
Thanks.
Charlotte.
Try to install new TWRP from: https://forum.xda-developers.com/vivo-5r/how-to/twrp-recovery-nougat-7-0-t3701235
Thanks, Mirozeman.
I reverted back to Marshmallow. I will try again if I go back to Nougat.
mirozeman said:
Try to install new TWRP from: https://forum.xda-developers.com/vivo-5r/how-to/twrp-recovery-nougat-7-0-t3701235
Click to expand...
Click to collapse
hello I am in the version 6.0.1 with root but the twrp that I have is the 3.0.2 and when wanting to make a backup I do not leave error it says error opening: \ '\' (NO SUCH FILE OR DIRECTORY) I do not see in the options either the copy of folder efs already installs the other recovery but it does not work for me it does not open 3.1.0
I was waiting for a root enabler for oreo (41.3.A.2.24), and I could find https://forum.xda-developers.com/xperia-x-performance/how-to/guide-stock-kernel-root-twrp-drm-fix-41-t3711837.
But this link is for version 41.3.A.0.401 and it does not work for everybody including me.
Since androplus still didn't bring out a new version of his kernel I tried the method from the above link.
But I'm using newer versions than in the description, I use TWRP 3.2.0, Magisk manager 5.2.2 and Magisk 15.2.
I can install the new version, twrp, the new boor image and Magisk 15.2.
I can boot and Magisk runs but the Safetynet control failes and Magisk does not enable root.
On the installation of the boot image, twrp and magisk I got some messages (marked in red)
unable to mount storage
failed to mount
Before I tried with magisk manager 5.5.1 and magisk 15.1 but then I got stuck at boot time at the sony logo.
Does anybody have a way to root Oreo (the latest version), enable DRM and enable root?
Ok I started all over again and I noticed I didn't follow the procedure first time.
So I excluded the FOTA kernel but whatever else I check no full wipe is done, I can always see the previous installed apps, it does not matter if I check Cust-reset, master-reset or reset-wipe-reason, the system is not wiped.
So that's my first problem, how to wipe the previous install.
Flashing the rom seems to be OK, same thing for flashing boot_oreo.img and twrp-3.1.1-0-dora.img.
I'm not sure about twrp 3.2.0.0 because this version is off-line now, so I tried with TWRP 3.1.1.0 and 3.2.1.0 but they all gave me the same result.
Problems start when I have to flash drmfix.zip, safety-net cleaner or magisk 15.2. The procedure tells me the flash is ok but have a look at thet attached images, I get errors while flashing. One picture for drmfix, one for safety-net-cleaner and one for magisk 15.2
After flashing all of this I can boot successfully but when I try to get root in ES File Explorer pro, it does not work. When I go into Magisk and try the afety-net check I get ctsProfile false and basicIntegrity False.
So the rom does work but I do not get root.
I tried all of this with the Italian rom 41.3.A.2.24.R1E ? I can start all over again with the UK version 41.3.A.2.24.R2E but I do not know if this makes any sense.
So can anybody tell me what to do to get it all going?
deboopi2 said:
I was waiting for a root enabler for oreo (41.3.A.2.24), and...
Click to expand...
Click to collapse
1 - Do use always Adrian DC latest fully working TWRP build for dora.
2 - You don't need a 3rd party kernel to achieve that, instead, you can easily create your own one, based always on stock kernel!
Thats the SELinux's problem.
Flash this first then flash magisk
https://forum.xda-developers.com/xp...ment/mod-sony-stock-patcher-xperia-x-t3528148
Hi there! I'm having issues to update OTA, this is my scenario:
Phone came with Android 8.0.0 Oreo (OPR1.170623.026.V9.5.9.0.ODHMIFA) so I did the following
1. Installed TRWP, then Magisk.
2. Installed Xposed (systemless) (Magisk Module)
3. Profit.
All good till here, the problem came when I tried to do the May OTA, it gives me the "Installation Problem" in the first step. I have read over the forum but I cant decide what to do. First I tried the " Uninstall -> Restore Image" in Magisk, but FAILED, and then:
1. Uninstalled Xposed Module.
2. Via TRWP uninstalled Magisk.
3. Update Failed.
Root Check says I'm rootless
Xposed Installer says "Xposed Framework is not installed". But OTA still fails.
So by now I'm thinking that maybe I have to flash stock system image, but not sure about this, actually NOT SURE WHAT TO DO, I just want to be able to have root and Xposed systemless, and then when an OTA arrives uninstall everything, do the update, reinstall Root/Xposed, and be happy.
Any guidance for me? Will I be OK if I flash JUST and ONLY the system image (OPR1.170623.026.V9.5.9.0.ODHMIFA)? Or do I have to flash ALL the stock images? What are the best option for me right now? Basically I'm trying to avoid reinstall all the apps and customization already done.
TL,DR:
Installed root/Xposed.
Uninstalled following different options.
Tried to do OTA, failed.
Not sure what to do now, I want to do OTAs and have root/Xposed.
Thinking into flash stock system image.
Thanks in advance!
Unistal twrp
panjivegency said:
Unistal twrp
Click to expand...
Click to collapse
But why some people can do the OTAs without uninstalling TWRP? Anyways I'll try this. Thanks. :good:
Hello everyone!
I have a P9 Lite which has:
- Build: VNS-L31ITAC555B180
- Emui: 4.1.3
- Android version: 6.0
I rooted ages ago with SuperSU 2.82 but now I need to move to Magisk. I tried the option "Switch superuser app" in order to avoid any incompatibilities with Magisk but when I tried to flash it, it gives me this issue:
Error "Boot image patched by unsupported programs.
I read online that I need a clean boot.img file, flash it and then it's possible to flash Magisk. How can I recover boot.img?
FYI the phone is stock, just with root and bootloader clearly unlocked.
Any solution?
Thanks!
xNoFantasy said:
Hello everyone!
I have a P9 Lite which has:
- Build: VNS-L31ITAC555B180
- Emui: 4.1.3
- Android version: 6.0
I rooted ages ago with SuperSU 2.82 but now I need to move to Magisk. I tried the option "Switch superuser app" in order to avoid any incompatibilities with Magisk but when I tried to flash it, it gives me this issue:
Error "Boot image patched by unsupported programs.
I read online that I need a clean boot.img file, flash it and then it's possible to flash Magisk. How can I recover boot.img?
FYI the phone is stock, just with root and bootloader clearly unlocked.
Any solution?
Thanks!
Click to expand...
Click to collapse
Hello,
if you have a full backup of your device ( just to use in case ),
you should use the option inside superSU app "do complete unroot"
following the procedure.
This will restore your original boot.img and let you install Magisk.
If you don't have a backup, just do it (all the partitions) then try the guide.
I wish you the best
Update 220823: Update for TWRP 12 and some other minor changes due to the switch from SafetyNet API to Play Integrity API
Updated 211203: include Magisk Canary
Edited 220113: correct a mistake in the Keeping Root process; some formatting changes
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
OOS 11: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449
OOS 12: TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/...win-recovery-project-8t-9r-2022-07-27.4473983
Magisk apk - using stable from https://github.com/topjohnwu/Magisk/releases or using Canary from https://github.com/topjohnwu/magisk-files/tree/canary
Universal SafetyNet Fix (UNSF-MOD) by @Displax from https://github.com/Displax/safetynet-fix/tree/integrity
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
Boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it. Also install USNF if you are using Magisk Canary.
If you want to keep TWRP then install the TWRP installer zip.
Reboot.
If you are using Magisk Canary, in Magisk>Settings enable Zygisk, Enforce DenyList, and Configure DenyList. Then reboot.
Keeping Root on an incremental OTA update
Note: you do NOT need to (but can if you want to) follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you.
If your phone tells you you have an update:
If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot.
In Magisk tap on "Uninstall Magisk" and select "Restore images".
Install the OTA update but don't reboot yet.
Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root.
Reboot
When the phone has successfully rebooted the updated system, boot into bootloader mode.
Boot TWRP using fastboot boot x.img where x.img is the TWRP image file.
Take a backup of the current recovery partition as you'll need it for successfully updating when the next incremental OTA becomes available.
Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
If you want to keep TWRP then flash the TWRP installer zip.
Reboot and disable airplane mode.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggest this method (https://forum.xda-developers.com/t/...1-kb2003-kb2005.4178675/page-25#post-85386145) but this doesn't work for everybody (it doesn't for me).
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an OTA update
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
morphius88 said:
ctsProfile fails. Is there a way to fix it? Tried stable Magisk and Canary.
Click to expand...
Click to collapse
Best place for getting support for Magisk is https://forum.xda-developers.com/t/magisk-general-support-discussion.3432382/
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
berthur said:
Hi,
Thanks for the guide!
What can i do if i forgot to backup stock boot and recovery?
Click to expand...
Click to collapse
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
BillGoss said:
You have a number of options:
If your update was an incremental OTA:
1. Ask in the Q&A forum or in one of the update threads if someone can share those two partitions with you.
2. If you're on 11.0.10.10kb05aa then you can get boot from a number of the update/rooting threads and the recovery from this thread by @mslezak https://forum.xda-developers.com/t/...-rooted-users-install-from-fastbootd.4316147/
3. Use this tool by @mslezak to create the full partitions from an incremental update https://forum.xda-developers.com/t/...urrently-op8t-11-0-9-9-kb05aa-posted.4314677/
If you updated using a full installation zip:
- use payload dumper to extract the two partitions from payload.bin
Click to expand...
Click to collapse
Than you!
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Wishmasterflo said:
Hello!
Does someone have a backup of the Stock recovery from OOS 11.0.10.10.KB05BA and can share it here?
Thanks in advance.
Click to expand...
Click to collapse
Download the zip from https://forum.xda-developers.com/t/oneplus-8t-rom-ota-oxygen-os-repo-of-oxygen-os-builds.4193183/ and then use payload dumper to extract the files.
That worked like a charm. Thanks a lot.
I'm Magisk rooted and I have TWRP installed on my 8T EU model.
The OnePlus updater app registers that I am rooted and wants to download the full OTA.
Do I also have to do all the things you described after "Keeping Root on an OTA update" or is there a simpler way?
If yes, then I have a question regarding this step:
2. In Magisk tap on "Uninstall Magisk" and select "restore images".
Click to expand...
Click to collapse
Did Magisk automatically backup these images? Because I didn't do it myself. I only have backed up all my partitions (including boot) after I had installed TWRP and before I rooted.
EDIT:
BillGoss has thankfully already replied in another thread (in which I have basically asked the same question because I am an impatient bast***) where I suggested the overly present "easy" update scheme, which he expects to work. So this should be fine for other people in my situation:
1. Let the system download and install full OTA and DO NOT let the device reboot after it's done
2. Install TWRP A/B Retention Script
3. Install Magisk to inactive slot and reboot
EDIT2:
I just want to add that before having done the above mentioned steps 1-3, I have disabled all Magisk modules and rebooted the device. So the full procedure is the following:
1. Disable all Magisk modules and reboot
2. Let the system download and install full OTA and DO NOT let the device reboot after it's done
3. Install TWRP A/B Retention Script
4. Install Magisk to inactive slot and reboot
Youtube step by step video (he says that he "uninstalls" the Magisk modules but he just deactivates them):
Thanks @haitower
I've updated the OP to make it clear that the process described there only applies to incremental updates.
Also, to answer your question re Magisk backups: Magisk writes a copy of the installed boot image to /data/Magisk* before patching it. A "restore image" uses that backup.
BillGoss said:
I keep seeing posts that say you can't root OOS after an OTA unless you have a full image installation zip. That's just not true these days (September 2021).
You can use @osm0sis' method in https://forum.xda-developers.com/t/...ices-platforms.2239421/page-149#post-84764713
And @g96818 suggests using "Install to inactive slot" but this doesn't work for everybody (it doesn't for me) which works provided you do it properly - see https://forum.xda-developers.com/t/...00-kb2001-kb2003-kb2005.4178675/post-85801253.
And here's how to do it using TWRP.
What you'll need:
• TWRP image (.img) and (optionally) installer zip from https://forum.xda-developers.com/t/recovery-11-alpha-teamwin-recovery-project-8t-kebab.4302449/
• Magisk apk - I'm using v23.0 stable from https://github.com/topjohnwu/Magisk/releases/
I'm also assuming you have an unlocked bootloader, know how to use fastboot, how to use TWRP, and how to use Magisk.
I'll go through rooting a currently unrooted version of OOS and then doing an incremental update OTA.
Root unrooted OOS
1. Install the Magisk APK. I find that this works nicer than letting the stub download the full app the first time you use it.
2. Boot into bootloader mode
3. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
4. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
5. Install the Magisk APK, just like you would install any zip file in TWRP. Note: the APK must be named Magisk-*.apk otherwise TWRP won't list it.
6. If you want to keep TWRP then install the TWRP installer zip.
7. Reboot
Keeping Root on an incremental OTA update
Note: you do NOT need to follow this process if you're installing a full OTA. You only need to install the full OTA and then install Magisk to the inactive slot and reboot from Magisk when it prompts you
If your phone tells you you have an update:
1. If you have TWRP installed, then boot into TWRP and restore the stock recovery and reboot
2. In Magisk tap on "Uninstall Magisk" and select "restore images". Or, if you're like using terminal commands, restore the stock boot image (you backed it up with TWRP) to the current slot using dd
3. Install the OTA update but don't reboot yet.
4. Turn on airplane mode so that apps can't call SafetyNet when you reboot the phone without root
5. Reboot
6. When the phone has successfully rebooted the updated system, boot into bootloader mode
7. Boot TWRP using fastboot boot x.img where x.img is the TWRP image file
8. Take a backup of the current boot and recovery partitions as you'll need them for successfully updating when the next incremental OTA becomes available
9. Clean up old Magisk backup copies of stock boot images by using File Manager to delete /data/magisk_backup_* directories
10. Install the Magisk APK, just like you would any zip file in TWRP. Note: the APK file name must start with Magisk- otherwise TWRP won't list it. Your existing Magisk settings, modules, and [hidden] Magisk app will be preserved.
11. If you want to keep TWRP then flash the TWRP installer zip.
12. Reboot and disable airplane mode
Click to expand...
Click to collapse
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
e1thx said:
Hello,
Thank You for the detailed description, it helped me a lot.
I'm new with the Oneplus 8T phone. The last handset I had was the Mi MIX 2. The rules of using root are familiar to me and I understand everything from your description. I only have a question about TWRP, once I have them permanently installed on device, can I backup the system or date partition via TWRP? I always made backups in case i messed up something and didn't work properly.
This question came from https://twrp.me/oneplus/oneplus8t.html
They write there:
"This device uses Dynamic Partitions
This means that TWRP will not allow modifications to any of the partitions that make up the Super partition on the stock ROM. All backups and restores will include the full Super partition rather than the individual dynamic partitions.
In order to flash the individual partitions, you will have to boot into fastbootd."
I would be grateful for Your information, Thank You.
Click to expand...
Click to collapse
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Hello!
Today I saw that EU: 11.0.12.12.KB05BA was available as OTA Update so I started to download it using the "Keep root on OTA Update".
During the download I recognized that I was still only connected to mobile network 4G instead of WiFi.
So I stopped the download of the OTA, restarted the phone and turned on WiFi but now I don't get the notification for the new OTA Update anymore and when checking for new Updates it says that my OOS 11.0.11.11 is up to date.
I guess the system has somewhere already stored that I started the download of the new 11.0.12.12 OTA but did not finish it and now I don't get the message to download it anymore.
Any idea how I can fix this so that I can download the new OTA again?
Thanks a lot!
EDIT: I am downloading it now via OxygenOS Updater (the full OTA).
BillGoss said:
See post #3 in https://forum.xda-developers.com/t/...recovery-project-8t-kebab-2021-29-11.4302449/
Click to expand...
Click to collapse
I understand that if I want to restore system and data when something doesn't work for me then I just do recovery for all the partitions, system, data etc that I do in twrp?
Please see the update in the OP regarding OOS 12.